Telnet Session to AIX Post: 302130712

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

telnet session timeout

hi, we can set something such that if the user has been idle for a while, it will auto disconnect. where to do so? thanks

2. Shell Programming and Scripting

Telnet session does not expire

Dear friends.. Our project has a module that runs on handheld devices. Through the handheld we telnet to solaris where the application actually runs. I noticed that after starting a session through the handheld, if i go out of range or if i remove and replace the battery in the handheld, the...

3. Shell Programming and Scripting

Telnet Session

{ sleep 2 echo "$user" sleep 2 echo "$password" sleep 2 echo " ls" sleep 10 echo "exit" }| telnet $server I have a machine x and i have executed the above script on machine 'x'. i entered the...

4. IP Networking

intercept the ip address of a telnet session

The situation: a Unix system (UnixWare 7.1.3) to which are connected other systems; various p.c. on the LAN that they connect Unix to the system via TelNet. The problem: I need to intercept the address IP of the p.cs. connected via telnet to the Unix system. Particularly, I have to know the...

5. UNIX for Dummies Questions & Answers

check for successfull telnet session

In either case using ksh or tcl, how can I check that I have a successfule telnet session and am being prompted with a tacacs login prompt ? :confused: DOIT () { sleep 2 echo "<tacacs name >" sleep 1 echo "<password>" echo "en" sleep 1 echo "<enable password>" echo "term length 512"...

6. UNIX for Dummies Questions & Answers

Unix Telnet session

Hi Is there any way whilst in a telnet session you can view your client machine name that you are using to connect to the Unix box ? :eek:

7. UNIX for Dummies Questions & Answers

Disconnecting a telnet session

How can I disconnect an existing telnet session? The host is a serial port server with multiple ports. The users login using the host's name and a port, i.e. telnet host01 1235. Thanks.

8. HP-UX

ssh session getting hung (smilar to hpux telnet session is getting hung after about 15 minutes)

Our network administrators implemented some sort of check to kill idle sessions and now burden is on us to run some sort of keep alive. Client based keep alive doesn't do a very good job. I have same issue with ssh. Does solution 2 provided above apply for ssh sessions also?

9. AIX

AIX 5.3 : Limitation to 1 telnet session for some users

Hi, I search the way to limit, for a group on a AIX 5.3, one telnet session by user (Simultaneous). I search a lot in /etc/security but the only way found is with the pam authentication that i not use. No solution found also in smit menu... Thanks for your help.

LEARN ABOUT HPUX

mrinfo

mrinfo(1M)																mrinfo(1M)

NAME

       mrinfo - Multicast Routing Configuration Information Tool

SYNOPSIS

       debuglevel] retries] timeout] [ multicast-router ]

DESCRIPTION

       requests  the configuration information from the multicast-ourter, and prints the information to the standard out.  multicast-router can be
       either an IP address or a system name.  sends out the ASK_NEIGHBORS igmp  message  to  the  specified  multicast-router,  when  the  router
       receives  the request, it sends back its configuration information. If the multicast-router is not specified, the request is sent the local
       router.

       The the configuration information for each interface is printed in the following format:

       If there are multiple neighbor routers on one interface, they will all be reported on the output.  The possible values for flag are:

       Neighbors are reached via tunnel.

       The tunnel uses IP source routing.

       The interface is down.

       The interface is administratively disabled for multicast routing.

       The local router is the querier of the subnet.

       Please see mrouted(1M) for and

       The command line options are:

       Sets the level for printing out the debug message. The default is 0,
		     only error and warning messages will be printed. Debug level three prints most the messages.

       Sets the retry times to pull the routing daemon for information. The
		     default is 3.

       Specifies the timeout value in seconds for waiting the reply. The default value
		     is 4.

EXAMPLE

       The following is an example of quering the multicasting configuration from the local routing daemon.

	      127.0.0.1 (localhost) [version 3.3]:
		15.13.106.144 -> 15.13.106.145 (hpntcbs.cup.hp.com) [10/1/querier]
		193.2.1.39 -> 0.0.0.0 (all-zeros-broadcast) [1/1/disabled]
		15.13.106.144 -> 15.255.176.33 (matmos.hpl.hp.com) [10/1/tunnel]
		15.13.106.144 -> 15.17.20.7 (hpspddc.vid.hp.com) [10/1/tunnel/down]

   Note
       must be run as root.

AUTHOR

       was developed by Van Jacobson.

SEE ALSO

       mrouted(1M), map-mbone(1M).

																	mrinfo(1M)