Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: how to write application for 32 com port
Top Forums Programming how to write application for 32 com port Post 302129632 by amitpansuria on Wednesday 1st of August 2007 12:07:59 AM
Old 08-01-2007
Quote:
Originally Posted by porter
There are three basic options.

1. Write a single application and run 32 copies of it (this is the same way getty works)

2. Write a single-threaded application and use 'select' to determine which port is ready to read or write from.

3. Write a multi-threaded application and use either a thread per port, or two threads per port (one for reading, one for writing).

I would recommend option 1 as it's the easiest to write and test.

Option 2 is a more portable solution than 3 as you can avoid multithreading race conditions and synchronisation issues.
thx very much for replying me.
now in my application ,
data may come simultaneously in any port.
i mean data may come on more than one ports at a time and as soon as data come i m going to extract the packet and send that packet to another
port.
i think option 3 is better for me. but i m confuse here that if i use
two thread per port then there are 32 ports and i need to fire 64 threads.
is it good solution.
some one tell me that if u use 64 threads then your application become hand
please give me correct direction because its very important to make a correct design before writing the code.
Regards,
Amit
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

which port to write my server application?

I want to write a server application that would accept HTTP requests from client. The server would be on a machine that has no connection to the INTERNET. The clients that would be posting their HTTP requests would be doing so through webbrowser .Thus it would be sort of intranet application.... (0 Replies)
Discussion started by: rraajjiibb
0 Replies

2. IP Networking

How can I check what port addresses used the application

Hello Mentors! I am a new here in the furom, i hope somebody can understand my problem. Basically we have an application here called unigraphics and being installed per station and the setup is look like this. 1. installed unigraphics UGNX3 version on every station 2. some are installed in... (1 Reply)
Discussion started by: eykyn17
1 Replies

3. UNIX for Dummies Questions & Answers

What application is using the port

Hello im using sunos im trying to lock down application that taking my port when Im doing "netstat -in | grep 8080" Is gives me the indication that the port is taken but no indication who is taken the port. How can I find out who is taking my port? Thanks allot (7 Replies)
Discussion started by: umen
7 Replies

4. Linux

MQ application port 1414

Hi All, I have two MQ (port) 1414 established (going out) $ netstat -an | grep 1414 tcp 0 0 0.0.0.0:1414 0.0.0.0:* LISTEN tcp 0 0 20.76.1.1:32855 142.8.1.3:1414 ESTABLISHED tcp 0 0... (2 Replies)
Discussion started by: itik
2 Replies

5. Shell Programming and Scripting

command to know the application running of the port

Hi, is there any command to findout that which application is using the particular port. or whether any port is occupied with the specfic process id ? (4 Replies)
Discussion started by: mail2sant
4 Replies

6. Programming

Write own decryption application

Hi , I need some help as I dont know where to start. I need to create a unix decryption application. The information I have been given is this so far: the specification of the encryption process is: NET 2 Cryptography classes. RijndaelManaged encryption algorithm ... (13 Replies)
Discussion started by: caciing_help
13 Replies

7. Programming

unable to send read and write serial port

hey frns pls help me out !! i hav a code of c that i have to include in my project. i am using a device (geomeda) that has unix based OS. it also support SIM card for connecting to server . I need to send SMS to user from this device.. below code is not working .. i am unable to send sms and the... (7 Replies)
Discussion started by: yashwantkumar
7 Replies

8. HP-UX

how to check remote server port listening from application.

Hi, I have an application running on HP-UX, from this application I need to findout if the port number. lets say 7890,7891, 7892 are listening on the remote server running on HP-UX. Is there any way of doing it using "system()" function or any other? I noticed that nmap, netcat are not... (0 Replies)
Discussion started by: einsteinBrain
0 Replies

9. UNIX for Advanced & Expert Users

How to write if condition in shell script for application server?

Hi all, I have a code to create folder in application server through shell script and i want to create if conditional based folder folder=$HOME/test/sample/whatever if ; then echo "$folder already exists, not created." else mkdir -p "$folder" > /dev/null 2>&1 ... (7 Replies)
Discussion started by: Boost
7 Replies

10. Shell Programming and Scripting

Help Generate new port base on the last port but not in used by other application

Hi Expert, Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used... (6 Replies)
Discussion started by: lxdorney
6 Replies

LEARN ABOUT NETBSD

scc

SCC(4)							   BSD Kernel Interfaces Manual 						    SCC(4)

NAME

     scc -- Zilog 8530 Serial Communications Controller interface

SYNOPSIS

     scc* at ioasic? offset ?

DESCRIPTION

     The scc driver provides support for the Zilog 8530 Serial Communications Controller (SCC) via the IOASIC found on DECstation 5000 models in
     the /100, /20, and /240 series (supported by NetBSD/pmax).

     Each SCC device has two serial ports.  The DECstation 5000 model 20 provides one SCC device.  Other models provide two, but one port of each
     device is dedicated to mouse and keyboard input, respectively.

     Input and output for each line may set to one of following baud rates: 50, 75, 110, 134.5, 150, 300, 600, 1200, 1800, 2400, 4800, 9600,
     19200, 38400, or 57600.

     Speeds up to 230400 are supported by the chip and the motherboard, but speeds higher than 57600 do not work reliably without an external
     clock signal.

FILES

     /dev/ttya
     /dev/ttyb
     /dev/ttyc
     /dev/ttyd

     The mapping from units to serial-hardware outlets is idiosyncratic.  The even ports are wired serial connectors and the odd-numbered ports
     are reserved for mouse and keyboard.

     On machines with one port like Personal DECstations, the single device is ttya.

     On the 5000/1xx and 5000/2xx, the first serial port (default serial console) is ttyc and the second port is ttya.

SEE ALSO

     intro(4), ioasic(4), ttys(5), MAKEDEV(8)

HISTORY

     The scc driver first appeared in 4.4BSD.

     The scc driver was also used for the IOASIC SCC found in DEC Alpha model 3000 TurboCHANNEL based systems; NetBSD/alpha has since been con-
     verted to use the machine-independent zstty(4).

BUGS

     The IOASIC provides internal DMA channels that can be programmed to transfer up to 4096 bytes of data into, or out, of an SCC without further
     software intervention.  This feature of the IOASIC is not yet supported.

     The mapping from device-special files (major and minor number) to chip and port is arguably backwards.  ULTRIX tries to hide the hardware
     mapping, but NetBSD does not.  Users wanting to use ULTRIX compatible tty names /dev/tty0 and /dev/tty1 for the scc comm-port lines should
     make links or device-special files which match their hardware setup.

BSD
								  April 24, 2003							       BSD
All times are GMT -4. The time now is 08:57 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy