07-31-2007
Add
Sdsk=accraid(0,0,0,0)
to the boot prompt
or possibly
Sdsk=accraid(0,0,0,1)
Also check to see if the 320 controller is installed closer to the keyboard plug than the RAID controller.
The boot controller should be in the lower numbered slot(closer to the keyboard plug)
If you currently have the OS installed successfully on the RAID controller then you may get away with:
Boot:defbootstr Ssdk=accraid(0,0,0,0)
without having to re-install, then modify /etc/default/boot to include the Sdsk phrase.
10 More Discussions You Might Find Interesting
1. IP Networking
I have certain problems while Installing UNIX OPENSERVER.Could anyone solve that if I provide that problem. (3 Replies)
Discussion started by: Rajraius
3 Replies
2. Filesystems, Disks and Memory
Hello all,
I'm trying to install SCO openserver 5 on a 2.5 Gig hard drive, and I tried fdisk and a low-level format of the drive. When I insert the boot diskette all seems fine, and it asks me to set the cd-rom and it sees it and reads from it. Well, I'm thinking all is well until right after I... (1 Reply)
Discussion started by: immulett
1 Replies
3. UNIX for Dummies Questions & Answers
My company has a Compaq NeoServer running SCO OpenServer Release 5 (vintage late 1998) that we inherited from another small company. This has been a very reliable file server for our small company. We recently installed a new Linux server and would like to convert the NeoServer to other functions... (1 Reply)
Discussion started by: Jeff Boyce
1 Replies
4. UNIX for Dummies Questions & Answers
I am running the beta version of Openserver by SCO and the
Graphical login only gives me the option of logging into the
system v xwindows and I know that this build included KDE 3.3
I have tried the kde kdm command at shell prompt: command not
found. Any ideas anyone? (0 Replies)
Discussion started by: coreykirk
0 Replies
5. SCO
Hi everyone,
We r installing sco openserver 5.07 on dell poweredge 2800 but we are facing problem when installing SCSI-raid drivers. Dell provide Perc4 raid card and we dont found raid drivers for this specific raid card. So we r stuck up on primary stage and we also dont know the... (2 Replies)
Discussion started by: mineshkoli
2 Replies
6. SCO
can not for the life of me workout which BTLD to load allways shows no HDD available can any one give me a clue
tried
hpsas
aacraid
lsil
a160
a320
server is a ML310 G4 ?????:confused::confused: (7 Replies)
Discussion started by: wildginger
7 Replies
7. SCO
hello, i want to install release 5.0.5 on my notebook but the system hangs when extracing files from source media in fact after configuration all of setting please help me:confused: (1 Reply)
Discussion started by: hossein
1 Replies
8. SCO
I am currently having a problem with my SCO OpenServer 5.0.5 / 3.2v5.0.5 system.
Running smoothly for the past 3 years, at random on March 16, 2010 the system crashes. I reboot it. Everything is normal again. 9 hours later it crashes again. This cycle has repeated itself ever since then. System... (2 Replies)
Discussion started by: jesmith
2 Replies
9. UNIX for Advanced & Expert Users
Hi All ,
I wanted to install SCO Open server 5.0.7 on HP DC7600 Desktop Machine, is there any bootloader and which site i can find it to enable me install it because the system is not recognizing the Hard disk just like the ML G Series machine installations.
Please help if you have done this... (4 Replies)
Discussion started by: davosky
4 Replies
10. SCO
Hello all,
First off- great forum! I have learned a lot just by reading some of the questions and answers. Good to see there are good people out there still willing to help!
Here is my dilemma- I have a fairly new server running an Activant product on it, which runs SCO openserver 5.0.5... (9 Replies)
Discussion started by: crt001
9 Replies
ICP(4) BSD Kernel Interfaces Manual ICP(4)
NAME
icp -- ICP-Vortex and Intel Storage RAID driver
SYNOPSIS
icp* at pci? dev ? function ?
ld* at icp? unit ?
icpsp* at icp? unit ?
scsibus* at icpsp?
DESCRIPTION
The icp driver provides support for the newer (post 1997) ICP-Vortex GDT and Intel Storage RAID controllers.
The ld driver provides access to logical devices (disk arrays) presented by the controller. The icpsp driver provides direct access to other
SCSI devices attached to the controller, such as tape or CD-ROM drives.
DIAGNOSTICS
pci_mem_find: expected mem type 00000000, found 00000002
This message may be displayed during autoconfiguration if the controller's memory is mapped below 1MB in physical address
space. This can be disabled either through changing a setting in the controller's BIOS utility, or changing the position of a
jumper on the board. See your controller's documentation for more information.
SEE ALSO
intro(4), ld(4), scsi(4)
HISTORY
The icp driver first appeared in NetBSD 1.6, and was based on the FreeBSD and OpenBSD drivers of the same name.
BUGS
ISA & EISA front-ends and a management interface are needed.
Older PCI boards are not yet supported.
BSD
April 20, 2002 BSD