Sponsored Content
Operating Systems Solaris Dual IP configuration with two different network card Post 302126084 by dr.adnan.sarwar on Tuesday 10th of July 2007 02:34:47 AM
Old 07-10-2007
Dual IP configuration with two different network card

I am trying to configure dual IP each on different interfaces (ce0, ce2) with one logical/virtual IP. I can ping all three IP but can not TELNET to any of them. Here is all the information:
*********************************************************
root@osssvr # more /etc/hosts
#
# Internet host table
#
127.0.0.1 localhost
172.31.240.20 osssvr loghost osssvr.net
172.31.240.18 osssvr-1
172.31.240.19 osssvr-2
172.31.240.16 osssvr-sc0
172.31.240.15 osssvr-sc1
172.31.240.14 osssvr-sc
172.31.240.13 SE6130
172.31.240.12 SE6130
172.31.240.17 ossconsole
root@osssvr # more /etc/netmasks
#
# The netmasks file associates Internet Protocol (IP) address
# masks with IP network numbers.
#
# network-number netmask
#
# The term network-number refers to a number obtained from the Internet Network
# Information Center. Currently this number is restricted to being a class
# A, B, or C network number. In the future we should be able to support
# arbitrary network numbers per the Classless Internet Domain Routing
# guidelines.
#
# Both the network-number and the netmasks are specified in
# "decimal dot" notation, e.g:
#
# 128.32.0.0 255.255.255.0
#
172.31.240.0 255.255.255.192
root@osssvr # more /etc/hostname.ce0
osssvr group omc up
addif 172.31.240.18 netmask 255.255.255.192 broadcast 172.31.240.63 -failover de
precated up
root@osssvr # more /etc/hostname.ce2
172.31.240.19 netmask 255.255.255.192 group omc broadcast 172.31.240.63 -failove
r deprecated up
root@osssvr # more /etc/nodename
osssvr
root@osssvr # more /etc/defaultrouter
172.31.240.1
root@osssvr #
*********************************************************

On rebooting OS, I get messages like:
1. configuring IPv4 interfaces: ce0Jul 9 21:00:38 in.mpathd[34]: Failures cannot be detected on ce2 as no IFF_NOFAILOVER address is available

2. osssvr console login: Jul 9 21:01:27 osssvr in.mpathd[34]: All Interfaces in group omc have failed

This E4900 SUN machine with SunOS5.8 installed on it! Plz help me immd.
 

10 More Discussions You Might Find Interesting

1. IP Networking

network card

I have a UnixWare 2 server that has an ISA 3Com NIC that has just a BNC connector on it. I want to remove this and install an ISA 3Com NIC that has a BNC/RJ45 connector. What steps do I have to go through to successfully complete this? Thye are almost the exact same cards except for the... (1 Reply)
Discussion started by: cparks
1 Replies

2. UNIX for Dummies Questions & Answers

Sound Card configuration

Hie, Im using Linux Kernel 2.2.16-22 (Linux Ver7.0), My problem is My sound Card is not detected and configured properly, i tried many ways but still cant configured it out. Heres my detail problem. Whenever i tried to configure my sound card which i newly purchased ( Creative Vibra 128 Audio... (2 Replies)
Discussion started by: killerserv
2 Replies

3. UNIX for Advanced & Expert Users

redhat 7.2 dual head video card

HI. i have two monitor and two video card in one system, i want use both of the monitor, i am currently using redhat 7.2 and solaris 8, i was wondering if someone can help me set my system as a dual monitor, basically it called dual head in redhat but i dont' know what it called in sun. Im tring... (4 Replies)
Discussion started by: souldier
4 Replies

4. UNIX for Dummies Questions & Answers

Dual network ports

Hey all, I got a Ultra 60 and I'm going to put a quad fast ethernet card into it, also I have a NAS with dual ethernet ports. I'm going to setup the Ultra 60 as a gateway to the NAS. Is it possible to setup 2 ports on the quad fast ethernet card to talk to the 2 ports on the NAS? Both... (2 Replies)
Discussion started by: merlin
2 Replies

5. UNIX for Advanced & Expert Users

Network Card Help

I have been having trouble with my sis900 neytwork card in slacwkare linux. I tried to modprobe the sis900, it didnt give me any errors but it didnt load it. so I put in a realtek 8139 network card and tried it too. These are the errors i get with the two cards when trying to do insmod on either of... (3 Replies)
Discussion started by: The Fridgerator
3 Replies

6. SCO

speciliax card configuration

dear all i configured pci speciliax card in sco open server 5.0.5 but i only getting cursor prompt in terminal side my terminal is vt100 pls give the quries for configure terminal and speciliax card regards jeevaraj (0 Replies)
Discussion started by: jeevaraj
0 Replies

7. UNIX Desktop Questions & Answers

Dual monitor for Intel 82915G & ATI Rage 128 card on FC6, Dell Optiplex Gx520

I want to setup dual monitor for the Dell Optiplex Gx520 computer. The motherboard has an Intel Corporation 82915G Integrated Graphics Controller. Then I add an ATI Rage 128 video card. The dual monitor work on Windows 2000 with the Intel chip as the primary screen and the ATI chip... (0 Replies)
Discussion started by: TsanChung
0 Replies

8. Solaris

quad card configuration

Hi Group, I Have just installed quad card in my V440 machine, I am facing problem I cn just ping its ce0 card only rest of the cards are not ping able, here is details of my machine. ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 ... (2 Replies)
Discussion started by: sameergrover
2 Replies

9. Hardware

FAQ, support multiple monitor 3 or 4 using dual video card SLI or Crossfire

Hi, I would like to ask if someone has knowlodge or perhaps own/experience this kind of a machine, Im buying a desktop with a plan of having multiple monitor 3 or 4,now my question is, i want to used the sli or crossfire config with each video card has 2 dvi or vga connector, does this 2... (0 Replies)
Discussion started by: jao_madn
0 Replies

10. UNIX for Beginners Questions & Answers

Want to dual boot windows/Linux on a ssd/hdd configuration

I have a small ssd (240 GB) and a 1TB hdd. I want to use the ssd to store anything related to Windows (os and other stuff like games) and also the linux bootloader (so linux boots faster). And I want my hdd space to be for linux stuff (like the fedora os, linux packages, etc). Can you help me do... (1 Reply)
Discussion started by: mafiaskafia
1 Replies
netmasks(4)							   File Formats 						       netmasks(4)

NAME
netmasks - network mask database SYNOPSIS
/etc/inet/netmasks /etc/netmasks DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part). For example, 128.32.0.0 255.255.255.0 can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition to the standard sixteen bits in the network field. When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net- masks file. For example, 128.32.0.0 255.255.255.0 128.32.27.0 255.255.255.240 128.32.27.16 255.255.255.240 128.32.27.32 255.255.255.240 128.32.27.48 255.255.255.240 128.32.27.64 255.255.255.240 128.32.27.80 255.255.255.240 128.32.27.96 255.255.255.240 128.32.27.112 255.255.255.240 128.32.27.128 255.255.255.240 128.32.27.144 255.255.255.240 128.32.27.160 255.255.255.240 128.32.27.176 255.255.255.240 128.32.27.192 255.255.255.240 128.32.27.208 255.255.255.240 128.32.27.224 255.255.255.240 128.32.27.240 255.255.255.240 128.32.64.0 255.255.255.192 can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through 128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field. Invalid entries are ignored. SEE ALSO
ifconfig(1M), inet(7P) Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park, Calif., August 1985. V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519, Network Information Center, SRI International, Menlo Park, Calif., September 1993. T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif., December 1995. NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility. SunOS 5.10 7 Jan 1997 netmasks(4)
All times are GMT -4. The time now is 05:50 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy