Usb To Serial (sco6) Post: 302125660

10 More Discussions You Might Find Interesting

1. Linux

modem - usb to serial configuration

I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0 I am using the device /dev/ttyUSB0 When I issue the command "mgetty ttyUSB0" I get the following output in the log file. How do I get the system to see the modem. 12/02 14:17:55...

2. Programming

Accessing device with Prolific USB-serial controller.

I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac. After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So...

3. Solaris

Usb to serial connection to Sun Enterprice 450

Hi all, I must connect my PC (Windows 2000) to Sun Enterprise 450 (4 X UltraSPARC-II 400Mhz) for Solaris 10 Installation. My PC doesn't have a serial port therefore I must use USB port. How can I connect USB port of my PC to the serial port (DB 25) of Sun 450? Will be there any problems with...

4. Solaris

Forcing OpenBoot: H/W Solution to no <BREAK> function on USB Serial

Please note: This solution does require some soldering ability. If, like me today, you really really need to get into OpenBoot on a non booting Solaris machine (in my case an Ultra 5) but your USB dongle won't send <BREAK> then here is a -really- simple hardware hack that works a treat: ...

5. UNIX for Dummies Questions & Answers

USB serial help needed

Hi iam new bie to unix. we are getting the sensor positional values on hyperterminal(UART).but our task is to use this data for mouse movement.so wat we hav to do ?? is this required to change usb driver cud u send info regarding my query?? Thanks in advance :) :) :)

6. Solaris

USB to Serial Adapter connection

Hi Community, I'm working on Sun Server V490 with my PC (with OS Vista). I'm using a USB to Serial Adapter to connect to Server directly. I've this problem, I'm connecting to Server with Putty client with this settings: boud rate 9600, 8 bit, 0 parity, 0 flow control, but after to have typed...

7. Hardware

How to install a driver of my USB-A to Serial Cable

Hi Gurus of Unix Recently I install a OpenSolaris in My HP 530 In this moment want to install a USB-A to Serial Cable. Any guru can send a Link where I can use how reference. I want to configure a Router and my PC don't have any serial Port. My LapTOP only has USB ports. In this case I buy a...

8. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

9. Solaris

Solaris 11.2 does not assign serial port to 3g usb modem?

In ubuntu etopic i create this udev rules for prolink 3g usb modem: SUBSYSTEM=="block", SUBSYSTEM=="scsi", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="f000", ACTION=="add", RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000" After plugging the usb modem, ubuntu assigns the ports...

10. Linux

Connect from USB to serial port of switch

I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID...

LEARN ABOUT LINUX

dh_auto_install

DH_AUTO_INSTALL(1)						     Debhelper							DH_AUTO_INSTALL(1)

NAME

       dh_auto_install - automatically runs make install or similar

SYNOPSIS

       dh_auto_install [buildsystemoptions] [debhelperoptions] [--params]

DESCRIPTION

       dh_auto_install is a debhelper program that tries to automatically install built files. It does so by running the appropriate command for
       the build system it detects the package uses. For example, if there's a Makefile and it contains a install target, then this is done by
       running make (or MAKE, if the environment variable is set). If there is a setup.py or Build.PL, it is used. Note that the Ant build system
       does not support installation, so dh_auto_install will not install files built using Ant.

       Unless --destdir option is specified, the files are installed into debian/package/ if there is only one binary package. In the multiple
       binary package case, the files are instead installed into debian/tmp/, and should be moved from there to the appropriate package build
       directory using dh_install(1).

       DESTDIR is used to tell make where to install the files.  If the Makefile was generated by MakeMaker from a Makefile.PL, it will
       automatically set PREFIX=/usr too, since such Makefiles need that.

       This is intended to work for about 90% of packages. If it doesn't work, or tries to use the wrong install target, you're encouraged to skip
       using dh_auto_install at all, and just run make install manually.

OPTIONS

       See "BUILD SYSTEM OPTIONS" in debhelper(7) for a list of common build system selection and control options.

       --destdir=directory
	   Install files into the specified directory. If this option is not specified, destination directory is determined automatically as
	   described in the "DESCRIPTION" section.

       -- params
	   Pass params to the program that is run. These can be used to supplement or override the any standard parameters that dh_auto_install
	   passes.

SEE ALSO

       debhelper(7)

       This program is a part of debhelper.

AUTHOR

       Joey Hess <joeyh@debian.org>

8.9.0ubuntu2.1							    2012-06-12							DH_AUTO_INSTALL(1)