Spliting PCI-X Dual Channel Ultra320 SCSI Adapter Post: 302125494

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

adaptec scsi host adapter

Can anyone out there help me out? I'm trying to install a scsi tape back up on a sys running sco openserver 5.0.4. When I go through the steps for mkdev tape it seems like it works, but when I reboot I still don't see the tape. Also when it boots up I get a scsi bios not installed error. I've...

2. Solaris

Which SCSI Adapter?

Hi. I need to find a simple SCSI adapter card for a Sun Ultra 5 workstation. I don't need the type w/ ethernet attached (e.g. X1032) as I already have ethernet onboard & they are more spendy. I know Adaptec is out, but what unit would work? I am attaching an external SCSI tape unit to this...

3. Solaris

Trouble Installing a SCSI Adapter

Okay. I admit I'm sort of a newbie in this regard. I installed a SCSI adapter on a Sun Ultra 5 workstation. I did the standard STOP-A on the startup and got the OK prompt. I then tried probe-scsi-all. It dumps me back @ the OK prompt w/ no message whatsoever. I tried probe-scsi, nothing. ...

4. SCO

PCI Express 1x HBA for parallel SCSI in Openserver 6

I'm floundering here trying to locate a PCI-E 1x HBA that will support an external tape drive in SCO Openserver 6. I was unable to find anything that would work in the compatible hardware list and a call to Adaptec confirmed that PCI-X would've been a better option for the risers in the Dell 2950...

5. AIX

Power6 Virtual Fibre Channel Adapter

Hello, Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter. It is similar to virtual scsi adapter. In my client partition I created the virtual Fibre Adapter mapped it with the VIO...

6. Hardware

SCSI Ultra320 80->68 adapter

I need to connect 80pin SCA Ultra320 SCSI hdd to 68pin. There are rumors that some bad "passive" adapters with problematic termination can fry the HDD. The adapter we got is Assmann ABSCA-2. Hard drive is 'Fujitsu MAW3073NC' Do we need to set any jumpers before turning it on? We already had...

7. AIX

NPIV with 8Gb PCI Express Dual Port FC Adapter

All I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable: $ lsnports name physloc ...

8. SCO

SCSI--Moving from PCI-X to PCIe

PCI-X was popular years ago, now it's not. Today's motherboards have PCIe slots, not PCI-X slots. I'm accustomed to using Adaptec, but I believe they've been bought out by ATTO Technology. Now ATTO has a product called PCI UL50 Dual Channel VHDCI Ultra320 SCSI PCIe card. So: does the SCO UNIX...

9. SCO

Moving hard drive and SCSI adapter to another computer

OK group, it's been 12 years since I worked with SCO. I need some direction here: SCO Openserver 5.07 I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for...

10. HP-UX

HPUX 11.11 Sept.2003 cannot see PCI-X scsi adapter

I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC. At the OS prompt (after loading files), ioscan shows the Class ba, and shows...

LEARN ABOUT NETBSD

siop

SIOP(4) 						   BSD Kernel Interfaces Manual 						   SIOP(4)

NAME

     siop -- Symbios Logic/NCR 53c8xx SCSI driver

SYNOPSIS

   hp700
     siop* at mainbus? irq 3
     siop* at phatomas? irq 3

   PCI
     siop* at pci? dev ? function ?

     options SIOP_SYMLED
     scsibus* at siop?

DESCRIPTION

     The siop driver provides support for the Symbios Logic/NCR 53x8xx series of SCSI controller chips:

	   -   53c810, 53c810a and 53c815 (Fast SCSI)
	   -   53c820, 53c825 and 53c825a (Fast-Wide SCSI)
	   -   53c860 (Ultra SCSI)
	   -   53c875 and 53c875j (Ultra-Wide SCSI)
	   -   53c876 (Dual Ultra-Wide SCSI)
	   -   53c885 (Ultra-Wide SCSI and Ethernet)
	   -   53c895 (Ultra2-Wide SCSI)
	   -   53c896 (PCI 64bit, dual Ultra2-Wide SCSI)
	   -   53c1010-33 (PCI 64bit, dual Ultra160 SCSI)
	   -   53c1510d (PCI 64bit, dual Ultra2-wide SCSI)
     The SIOP_SYMLED option causes the driver to report SCSI activity on the GPIO pin 1, which is connected to the activity LED on some adapters.
     At this time only the 53c895 based Symbios and Tekram adapters are known to require this.

     If both siop and the esiop(4) drivers are compiled, esiop(4) will take precedence for controllers it supports.

SEE ALSO

     cd(4), ch(4), esiop(4), intro(4), pci(4), scsi(4), sd(4), st(4), uk(4)

HISTORY

     The siop driver first appeared in NetBSD 1.5.

AUTHORS

     The siop driver was written by Manuel Bouyer <Manuel.Bouyer@lip6.fr> for NetBSD.

BUGS

     siop supports the 53c1010-33 in Ultra2-wide mode only.  Use esiop(4) for Ultra160 support.

BSD
								   April 5, 2008							       BSD