Sponsored Content
Operating Systems Solaris REG-Internet Error(Network configuration) Post 302120776 by suntac on Friday 8th of June 2007 06:05:25 AM
Old 06-08-2007
Can you ping them?

can you try this and share the results:
ping Home.netscape.com

Can you also try this and share the results:
ping google.com

And can you try this and share the results:
ping 64.233.167.99


This will tell us if you have access to a DNS server and/or can go outside your internal network.


regards,
Johan Louwers.




Quote:
Originally Posted by jagadhees
Dear All,

I have found the following error when I launched Internet browser. Can any one explain what happened wrong in my network configuration?


Netscap Error
Warning:
The following hosts are unknown

Home.netscape.com
Home6.netscape.com
Internic.net

This means that some or all hosts will be unreachable.
Perhaps there is a problem with your name server?
If your site must use a non-root name server, you will
need to set the $ SOCKS_NS environment variable to
point at appropriate name server. It may or(may not)
be necessary to set the variable, or the
SOCKS host preference, to the ip address of the host
in question rather than its name


Jagadhees
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

How to connect to the Internet Using RH 7.2 i.e configuration plz Hlp

How to connect to the Internet Using RH 7.2 i.e configuration plz Hlp.....cause I want to accsses to the Internet to download Help and application in the Red hat OS???? (1 Reply)
Discussion started by: atiato
1 Replies

2. HP-UX

HP-UX Network Configuration

Hi, I have installed a HP-UX B.11.00 U 9000/800 Server in one of the domain. And I'm also able to telnet/ping into this server from systems in the same domain. But I'm not able to telnet/ping into this server from a different domain. So, what shoud need to do to achieve this... (6 Replies)
Discussion started by: S.Vishwanath
6 Replies

3. UNIX for Dummies Questions & Answers

Internet Configuration in SCO 5.05

Hi, I'm trying to configure SCO's internet manager for access to the internet. However, when I start the config program, my desktop turns black & white (unless I minimize communicator's window -- then it turns back to normal). I type in the user id and password and it looks as if the... (1 Reply)
Discussion started by: gseyforth
1 Replies

4. IP Networking

Cannot connect to rest of network/internet

I have a solaris 9 system that cannot get to the internet and cannot ping outside of the router. I can ping any other system on this campus but when i try to ping any other system outside of the campus im on i get unreachable. Here is the systems info: ip: 10.241.3.254 subnet: 255.254.0.0... (7 Replies)
Discussion started by: meyersp
7 Replies

5. UNIX for Dummies Questions & Answers

Network card and internet

Hi!. I have problems installing my network card under ther redhat kernel. First i tryed my integrated intel pro set 10/100 then my d-link 530tx Pci but none of them seems to be found. also i huse my network card to connect to the net trough PPPOE where i need to type my username and... (3 Replies)
Discussion started by: Gibbler
3 Replies

6. Solaris

network configuration

hi again... i configured my network settings sometiime ago using the sys-unconfig command.the active link was rtls0. there was some problem with the network so i changed the ISP. now when im trying to reconfigure the system wit sys-unconfig, it tries to configure the network on rtls1 (and shows... (1 Reply)
Discussion started by: strider
1 Replies

7. SCO

Network Configuration

I have a SCO 5.07 Server and I am trying to get it on my network. I have edited the /etc/hosts file and /etc/rc2.d/s99route . I has connectivity on the NIC card but not sure if I am forgetting another file. Thanks! (2 Replies)
Discussion started by: andrewd
2 Replies

8. Solaris

how to configure my network to use the internet

i have a router from my isp provider 02. my internet works fine in windows but i am unable to use internet in solaris. when i tried ifconfig command i was able to see the lo0 which is my laoopback adapter. pls can someone advice. (7 Replies)
Discussion started by: seyiisq
7 Replies

9. UNIX for Dummies Questions & Answers

network configuration

I am using solaris 10, my internet works alright but each time i reboot i keep loosing my connection. I will have to use the ifconfig iprb0 192.168.1.xx netmask 255.255.255.0 up and Route add default 192.168.1.xxx command to gain back my internet. I know there is a better way of addressing... (1 Reply)
Discussion started by: seyiisq
1 Replies

10. Solaris

Network configuration

Hi I have installed Solaris 5.10 on Intel x86 machine (standalone). I want to access internet through solaris. How should I configure the network? Is static IP or DHCP advisable? (5 Replies)
Discussion started by: johnl
5 Replies
network-test(1) 						  ifupdown-extra						   network-test(1)

NAME
network-test - check the network and test if everything is fine SYNOPSIS
network-test DESCRIPTION
The network-test program will test your system's network configuration using basic tests and providing both information (INFO), warnings (WARN) and possible errors (ERR) based on the results of these tests. It will check and report on: * Status of the network interfaces of the system including: link status, IP addressing and number of transmitted packets and error rates. * Accessibility to configured routes to external networks, including the default network route, checking the routers configured to give access to the network * Proper host resolution, testing DNS resolution against a known host. * Proper network connectivity, testing reachability of remote hosts using ICMP and simulating a web connections to a remote web server (the web server used for the tests can be configured through the environment, see below) The program does not need special privileges to run as it does not do any system change. However, the behaviour of the program when running as an unprivileged user is not the same as running as system administrator (i.e. root). If the program is run as system administrator it will try to run some tools that are only available to it to speed up some of the tests. The program relies on the use of ip, netstat, ifconfig, arp and (when running as root) ethtool or mii-tool, to obtain information about the system's networking configuration (status of available interfaces and configured network routes). It also uses ping, host and nc (netcat) to do tests of the network connectivity and ensure that the host can connect to the Internet. ENVIRONMENT
The program will, by default, check www.debian.org and its associated web server. If you want to use a different check host you can setup the environment as follows: CHECK_HOST The name of a host to use when testing DNS resolution. CHECK_IP_ADRESS The IP address of the host defined in CHECK_HOST CHECK_WEB_HOST The web server to use for testing purposes when testing network connectivity. CHECK_WEB_PORT The web server port of server CHECK_WEB_HOST that will be used for testing. EXIT STATUS
The program will exit with error (1) if any of the network checks fail. BUGS
This program does not have super cow powers so it is unable to fix the errors by itself. It is also unable to detect if the network is failing due to a local firewall policy been in place so make sure you check your system logs with dmesg (1) to detect if some of the active tests are being dropped due to your local firewall. Other known issues that might make the program not work reliable are: * IPv6: The program does not yet explicitly handle IPv6 only hosts, some of the tests might be biased towards IPv4 and might fail in IPv6 environments. * Proxies: The program does not check network connectivity for hosts that connect through the Internet using a proxy gateway for services. The program might report issues in hosts using proxies even when these might connect to the Internet properly through proxied services. * Firewall environments: some of the tests rely on direct connectivity to external hosts, which are tested using ICMP queries (through the use of ping. These tests might fail in hosts installed in networking environments with firewalls that block outbound ICMP communication. SEE ALSO
ip (8), netstat (8), ifconfig (8), ethtool (8), mii-tool (8), ping (8), nc (1) and host (1). AUTHOR
network-test was written by Javier Fernandez-Sanguino for the Debian GNU/Linux distribution. COPYRIGHT AND LICENCE
Copyright (C) 2005-2011 Javier Fernandez-Sanguino <jfs@debian.org>. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. On Debian systems, a copy of the GNU General Public License may be found in /usr/share/common-licenses/GPL. ifupdown-extra August 23 2011 network-test(1)
All times are GMT -4. The time now is 02:10 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy