i have intiated a process
then i execute the both commands alternatively , both commands did not get me any outputas the process is alive ...when sleep process finishes, both these commands returned me output
In the above case ,i need only the output "not running"
can help me on this.....
If you run the command interactively disble monitor first
Hi!
I'm using a script to start a process that might run forever if some parameters are given wrong (it's part of an optimization). I would now like to have the process killed after a certain walltime in that case. So far I get it done with the following lines
./My_process.e &
pid=`ps -ef |... (3 Replies)
I want to find the pid ( by ps ) that has already run over 30 seconds , I know ps only show the minute/hour .
eg. the start time of the below process are 15:19 / 15:20 , but I don't know the exact time ( in term of "second" ) it start to run ( I only know the hour and minute ) , if I want to... (2 Replies)
Except the command "top" , is there other function / tool is used to check the process status in the system like
1. what process are running ?
2. how the CPU are allocating ?
3. how many swap is using ?
4. "
Thx. (1 Reply)
Hi..
I have this code which tells me that if a process is running or not. Actually someone on this forum help me to do it. :) But now If i want to check if the process is not running for more than 10 minutes. Does anyone know the code or syntax that checks if a process is not running for some... (1 Reply)
Hello guys, I have one script running that I need to keep it running 24x7 so I'd like to know how can I implement a sort of monitoring process I mean if for some reason this process dies somehow it gets automatically started again.
Thanks. (8 Replies)
Hi,
I am running certain weblogic instance, in which it's hard to find which instance is stopped or running after stopping the weblogic , cause process status is for all the instance is same.
A URL which shows the instance is stopped or running.
But i have major challenge to check it through... (2 Replies)
I have process1 running on one machine and generating some log file. Now another process which can be launched on any machine wants to know if process1 is running or not and also in case it is running it wants to stream the logs file generated by process1 on terminal from which process2 is... (2 Replies)
For the newbies, I should have posted this years ago....
Here is the standard (tiny) "bread and butter" perl script (on Linux) I use in my crontab files to insure key processes are alive ( just in case ! ) like httpd, named, sshd, etc.
The example below if for named......
... (1 Reply)
Discussion started by: Neo
1 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)