04-25-2007
hi,
upssss...
so thats the problem,
ifconfig -a --> checking all installed NICs in the system,
and if you did not find the other NIC :
ifconfig hme1 plumb (if its a live machine/in production)
or
sys-unconfig will do machine configuration from scratch (hostname, NICs, ipaddr, gateway etc)
cheers.
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I am trying to configure DAT Tape drive on SUN E220 system but I don't have SUN keyboard. I am using a tty terminal k/b.
What are my alternavtives?
Is there any way to send interupts to the system on OK prompt using tty kb for probe SCSI.
Thanks in advance. (2 Replies)
Discussion started by: s_aamir
2 Replies
2. Filesystems, Disks and Memory
Does anyone know what steps I have to follow to move an A1000 between two E450's. Im running solaris 2.6 (1 Reply)
Discussion started by: MBGPS
1 Replies
3. IP Networking
How to install a second (ethernet) NIC on a Sun station on PCI 1?
Thanks! (2 Replies)
Discussion started by: igorgog
2 Replies
4. Solaris
can someone please through light on how to configure video and nic.
Dimension 3000 Series, Intel Pentium 4 Processor at 2.8GHz
256MB DDR SDRAM at 400MHz EA 0.00 0.00
17 in (17 in viewable) E173FP Flat Panel Display EA
Integrated Intel Extreme Graphics 2 EA
Intel Pro 100M Integrated... (4 Replies)
Discussion started by: Jimmpy
4 Replies
5. Solaris
Is there a way to check if my Sun box's network interface card is set to 10 or 100 Mbps?
Thanks! (1 Reply)
Discussion started by: FredSmith
1 Replies
6. Solaris
Hi....,
I'm having two intel system.both the system i installed sun sol 10.now i wan't to configure NIS .Pls tell me step by step configuration for server and client.pls Help me any body......... :mad:
Rgds,
Jay (4 Replies)
Discussion started by: rjay.com
4 Replies
7. Solaris
Hi Experts,
I am new for solaris, i am using Solaris10,can you anyone assist me how to configure IP in my machine.
Thanks (4 Replies)
Discussion started by: daya.pandit
4 Replies
8. Solaris
Dear All,
I had install SUn 9/05 on vmware workstation 6.5.0. Before install I see OS detect NIC, but after install I don't see any NIC. I have attack some picture to show my problem. Could someone have experience to help me resolve.
I'm newbee in this unix eviroment.
Thanks
Hoavn (2 Replies)
Discussion started by: hoavn
2 Replies
9. Solaris
Hi,
I am configuring the sun cluster between two nodes. It is asking me to create a filesystem called globaldevices in root and mount it permanently. I created a new slice c0t0d0s3 and created a filesytem /globaldevices. How can I mount it permanently. I know we have to do it /etc/vfstab, but... (3 Replies)
Discussion started by: gunnervarma
3 Replies
10. HP-UX
Hello,
I need to configure a second NIC on my HP UX, B.11.31 U ia64 ...if it is helpful.
I see a good thread to start on:
Configuring NIC
https://www.unix.com/hp-ux/15589-configuring-nic.html
I have started reading the man pages listed. Without having to know every last detail is there... (3 Replies)
Discussion started by: KmJohnson
3 Replies
LEARN ABOUT NETBSD
eshconfig
ESHCONFIG(8) BSD System Manager's Manual ESHCONFIG(8)
NAME
eshconfig -- configure Essential Communications' HIPPI network interface
SYNOPSIS
eshconfig [-estx] [-b bytes] [-c bytes] [-d filename] [-i usecs] [-m bytes] [-r bytes] [-u filename] [-w bytes] [interface]
DESCRIPTION
eshconfig is used to configure device-specific parameters and download new firmware to the Essential Communications RoadRunner-based HIPPI
network interface. The interface is very sensitive to the DMA performance characteristics of the host, and so requires careful tuning to
achieve reasonable performance. In addition, firmware is likely to change frequently, which necessitates a reasonably easy way to update
that firmware.
Available operands for eshconfig:
-b bytes
Adjust the burst size for read (by NIC of host memory) DMA.
-c bytes
Adjust the burst size for write (by NIC of host memory) DMA.
-d filename
Filename for file to download into NIC firmware. This must be a file in the standard Essential format, with :04 preceding every
line, and a tag line at the end indicating the characteristics of the firmware file.
-e Write data to EEPROM. Normally, setting tuning parameters will only persist until the system is rebooted. Setting this parameter
ensures that the changes will be written to EEPROM.
-i usecs
Interrupt delay in microseconds.
-m bytes
Minimum number of bytes to DMA in one direction (read or write) before allowing a DMA in the other direction. Tuning this prevents
one direction from dominating the flow of bytes, and artificially throttling the NIC.
-r bytes
Bytes before DMA starts for read (from host to NIC). This controls how soon the DMA is triggered; until this many bytes are
requested, the DMA will not begin.
-s Show statistics for the HIPPI NIC. Repeat the option to suppress non-zero statistics.
-t Show current tuning parameters on the host.
-u filename
Name of file to which the NIC firmware should be uploaded. Not currently supported.
-w bytes
Number of bytes required before write (from NIC to host) DMA is started. Until this many bytes are ready to be written, the DMA will
not start.
-x Reset the NIC. This is necessary for the HIPPI-FP support, as ifconfig(8) will no longer physically reset the NIC when the inter-
faces goes up and down.
Only the super-user may modify the configuration of a network interface.
DIAGNOSTICS
Messages indicating the specified interface does not exist or the user is not privileged and tried to alter an interface's configuration.
SEE ALSO
esh(4), ifconfig(8)
HISTORY
The eshconfig command first appeared in NetBSD 1.4.
BSD
June 17, 2005 BSD