Sponsored Content
Operating Systems Solaris how to install tape drive on sun ver 5.9 Post 302111264 by eykyn17 on Tuesday 20th of March 2007 12:07:04 PM
Old 03-20-2007
Hi Pressy,

Heres the result of iostat -En

# iostat -En
c0t1d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST34520LC Revision: 1483 Serial No:
Size: 4.54GB <4536791040 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
c0t3d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST34371W Revision: 0532 Serial No:
Size: 4.35GB <4349030400 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
c0t6d0 Soft Errors: 2 Hard Errors: 0 Transport Errors: 0

Vendor: TOSHIBA Product: XM-4101TASUNSLCD Revision: 1084 Serial No: 04/18/94
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 2 Predictive Failure Analysis: 0
rmt/0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: DEC Product: DLT2000 15/30 GB Revision: 840B Serial No: a


here is also the result when I execute the df -k command
df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t3d0s0 2193251 959997 1189389 45% /
/proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
fd 0 0 0 0% /dev/fd
swap 678460 16 678444 1% /var/run
swap 678744 300 678444 1% /tmp
/dev/dsk/c0t3d0s7 1434346 9 1376964 1% /export/home

How i able to mount the second drive, by the way the second drive has a data on it thats why I need to have this mounted so that i can see it

Thansk very much
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

How to configure tape drive on SUN

I am trying to configure DAT Tape drive on SUN E220 system but I don't have SUN keyboard. I am using a tty terminal k/b. What are my alternavtives? Is there any way to send interupts to the system on OK prompt using tty kb for probe SCSI. Thanks in advance. (2 Replies)
Discussion started by: s_aamir
2 Replies

2. UNIX for Dummies Questions & Answers

Tape drive install

I'm trying to install a tape drive on a compaq SCO OS 505. well I have gone through the mkdev tape comands and what have you yet no luck. when I reboot and do a simple tape rewind it gives me an error no such device etc.etc. IS there a diference in the xct0 and rct0 a the default? help.. (2 Replies)
Discussion started by: kikkin
2 Replies

3. Filesystems, Disks and Memory

Tape Drive Connected to a Sun Ultra 10/Solaris 2.7

I have a Sun Ultra 10/Solaris 2.7 with a differential SCSI card connected to a Supter DLt1 Tape Drive. When I boot the machine, and I do a probe-scsi-all in the very beginning of the boot process. It shows up correctly. If I wait for the boot process to proceed and then I do a probe-scsi-all, I get... (1 Reply)
Discussion started by: brv
1 Replies

4. Linux

How do l install Travan Tape drive 20/40 DAT on Redhat 8.0

Hi, Will someone help in giving the clue to installating Travan Tape drive on Redhat 8.0 Kayode (1 Reply)
Discussion started by: kayode
1 Replies

5. UNIX for Dummies Questions & Answers

DDS-2 Sun tape drive

Hey guys, I'm trying to mount a SUN DDS-2 tape drive on a SUN Ultra 80 machine running Solaris 9. I had the SCSI drive connected at time of install, I'm very new to Solaris so I don't know if Solaris would detect the drive like that and install some form of device driver. But, what im posting... (2 Replies)
Discussion started by: kingdbag
2 Replies

6. Solaris

Installation procedure of tape drive in OS ver 5.6

Hi, I'm executing the command devfsadm to check the tape drive as I did to 5.9 version but it gives me this message "devfsadm: not found" Is it different command to check the tape drive in 5.6 version? Thansk in advance. (7 Replies)
Discussion started by: eykyn17
7 Replies

7. Solaris

configure tape drive to sun solaris 10

Hi everyone. Im new to Sun Solaris or the Unix environment. My only background is the DOS command in windows and a little bit of c++ programming. I always worked with troubleshooting hardware and software issues with windows. Now that I need to configure tape drives using sun solaris, I had... (11 Replies)
Discussion started by: graboid888
11 Replies

8. AIX

SUN StorageTek tape drive with AIX 5.1

Hi, I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server. The server can detect the tape device. Can someone please advice urgently. Thanks (4 Replies)
Discussion started by: Caully
4 Replies

9. Solaris

Sun E220R + HP (SCSI) LTO Ultrium Tape Drive

Hi all, this time I'd need a help from an advanced Solaris system admin :rolleyes: I attached a HP StorageWorks Ultrium 215 Tape Drives - Overview - c00059530 - HP Business Support Center to my Sun E220R and it got recognized immediately (probe-scsi-all). Now the operating system boot process... (8 Replies)
Discussion started by: pseudocoder
8 Replies

10. Solaris

Install ext DLT Sun Tape drive on V445 Solaris 10

I have a SunFire V445 running Solaris 10 and am adding a Sun DLT tape drive. From the OK prompt the probe-scsi-all does see the drive and it is the proper target of 4. When I do the boot -- -r it does build the /dev/rmt directories correctly and the links to /devices appear correct as well. When I... (8 Replies)
Discussion started by: chastings
8 Replies
gvid_no_claim_dev(5)						File Formats Manual					      gvid_no_claim_dev(5)

NAME
gvid_no_claim_dev - PCI Vendor/Device ID that the gvid graphics driver will not claim VALUES
Failsafe Default Allowed values Recommended values Specific to the device you wish to prevent from claiming. DESCRIPTION
This tunable specifies the PCI Vendor ID and/or Device ID of a graphics device that the HP graphics driver should not claim. The graphics driver was designed to be a general purpose driver for all PCI graphics cards. As a result, the driver will attempt to claim any PCI graphics display device found on the system. This can be a problem for graphics device developers who need their own graphics driver to claim their own graphics device. The value of will specify a PCI Vendor ID and/or Device ID of a graphics card that the gvid graphics driver should not claim. It is a 32 bit number, with the upper 16 bits containing the PCI Vendor ID and the lower 16 bits containing the PCI Device ID. Either the Vendor ID or Device ID can use a wildcard value of For example, if is set to the value the driver will ignore graphics devices with a PCI Vendor ID of and a Device ID of If is set to the driver will not claim any graphics cards with a Vendor ID of regardless of the Device ID. Who Is Expected to Change This Tunable? Anyone who wishes the graphics driver to ignore a specific graphics device. This will typically be someone writing their own graphics driver for their own hardware. Restrictions on Changing Changes to this tunable take effect at the next reboot. What Other Tunables Should Be Changed at the Same Time? None. WARNINGS
All HP-UX kernel tunable parameters are release specific. This parameter may be removed or have its meaning changed in future releases of HP-UX. Installation of optional kernel software, from HP or other vendors, may cause changes to tunable parameter values. After installation, some tunable parameters may no longer be at the default or recommended values. For information about the effects of installation on tun- able values, consult the documentation for the kernel software being installed. For information about optional kernel software that was factory installed on your system, see at AUTHOR
was developed by HP. Tunable Kernel Parameters gvid_no_claim_dev(5)
All times are GMT -4. The time now is 02:31 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy