AMCHECKDUMP(8)						  System Administration Commands					    AMCHECKDUMP(8)

NAME

       amcheckdump - check the results of an Amanda dump

SYNOPSIS

       amcheckdump [--timestamp|-t timestamp] [--verbose] [-o configoption...] config

DESCRIPTION

       Amcheckdump verifies Amanda dump images by reading them from storage volume(s) and verifying that the images can be parsed by the
       appropriate application (if available). For example, a GNUTAR image is passed to GNU Tar for parsing, and any errors (e.g., corrupt or
       missing data) are noted.

       The application runs on the most recent dump or, if --timestamp is specified, on the most recent dump with that timestamp. Note that the
       verification is local to the Amanda server; if the dump application is not available, or is configured differently on the server than on
       the client, then the verification will most likely fail.

       If a changer is available, it is used to load the required tapes. Otherwise, the application interactively requests the tapes.

       See the "CONFIGURATION OVERRIDE" section in amanda(8) for information on the -o option.

EXAMPLE

       # check the most recent dump
       amcheckdump MYCONFIG

       # check a specific dump from back in '78
       amcheckdump MYCONFIG --timestamp 19780615

SEE ALSO

       amanda(8), amcheck(8)

       The Amanda Wiki: : http://wiki.zmanda.com/

AUTHOR

       Ian Turner <ian@zmanda.com>
	   Zmanda, Inc. (http://www.zmanda.com)

Amanda 3.3.3							    01/10/2013							    AMCHECKDUMP(8)