Sponsored Content
Top Forums UNIX for Advanced & Expert Users setting up my HOME PC as server Post 302107644 by craiged2 on Monday 19th of February 2007 11:04:37 PM
Old 02-20-2007
Most people are natted behind a router whether you have a static or dynamic ip address from your internet provider, I.E. your pc is plugged into the router/hub which in turn is plugged into your cable modem or DSL modem, etc.

If this is the case, you have two choices. Most routers allow you to specify which inside host is on a DMZ. You normally assign your pc a static private address from the router admin menu, such as 192.168.0.10 and then you tell the router that 192.168.0.10 is on the dmz. By doing this, when some goes to:

http://yourstatic_IP_ADDR , your router will re-route all the packets to your server/pc on the inside network, your home network.

This does expose your pc directly to the internet so you are forwarned.

A second method that can be used is port forwarding. You use this method normally if you are needing to open a few ports (21,22,25,80) and you tell your router to redirect packets sent to yourstatic_IP_ADDR port 80 to 192.168.0.10. port 80.

This exposes your PC less but every new port that you want to share to the outside world will need a port forward addition in the router.

Good luck.


cd
 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

setting Oracle Home

Hi, if i set Oracle home in the command line as export ORACLE_HOME=/usr/oracle/product/9.2.0; and then checking it by typing echo $ORACLE_HOME,its getting the correct result.But if i try setting the ORACLE_HOME from a shell script by just including the same line as above,it was... (3 Replies)
Discussion started by: DILEEP410
3 Replies

2. UNIX for Dummies Questions & Answers

Need help setting up a home solaris private network

Hi all, I just purchased 2 Ultra 10 servers and I want to practice with home networking. I want to create a private network where I can connect both boxes to the internet via broadband using my four port adsl modem/router. My ISP assigns me 192.168 addresses via DHCP and I use the ISP's DNS but... (1 Reply)
Discussion started by: Kongowea
1 Replies

3. UNIX for Dummies Questions & Answers

setting home as lin in user profile

Hi. I have a directory structure built with links. For example: /home/user1 is a link to /var/123/user1 can i set the home variable in the .profile of the user to use a link? or it has to be a "real" directory? tks (1 Reply)
Discussion started by: mrodrig
1 Replies

4. Shell Programming and Scripting

Setting path for a stand alone library in home directory

Hi all, This is probably a basic question. I had installed a stand-alone library called szip in my home directory, as I don't have the necessary root permission. I tried to set an environment for both include and lib files in my .cshrc script as setenv /home/szip/lib setenv... (3 Replies)
Discussion started by: alamcheril
3 Replies

5. UNIX and Linux Applications

Setting up Oracle RAC at home

Hello, I'm planning to set up Oracle 10g RAC at home. I was initaillay planning to get a windows desktop and install Cent OS after wiping out the existing windows OS. I have some questions with regards to this. 1) For setting up RAC, I would have to install an additional NIC besides the one... (2 Replies)
Discussion started by: luft
2 Replies

6. Solaris

hard disk broken, relocate user's home dir. All setting missing

Hi, guys I am a super newbie in solaris admin.... Now I got a problem. Due to the broken of one of Raid system, some user home directory is missing. Someone advises me to relocate the home directory on the new drive. I have googled and have tried " usermode -d " command. But I found a... (3 Replies)
Discussion started by: dr_dw
3 Replies

7. IP Networking

Setting to SSH home-PC from Work

Hello, My question is very basic for the settings to SSH my home PC from work. Home network two PC: Internet comes into my house through ISP modem and then the two PCs are connected with the router (Trendnet). The IPs for my PCs are How to set other stuffs for me to access my home PC from... (5 Replies)
Discussion started by: yifangt
5 Replies

8. UNIX for Dummies Questions & Answers

Copy the newest file from a different server to your home server.

Hi all, So I am on server 1, and I want to grab the newest file from a particular directory on server 2, and place this in a directory on server 1. I am trying to use: ls -tr | tail -1 This works, and gets me the newest file in a particular directory. Using svn `ls -tr | tail -1` etc I... (1 Reply)
Discussion started by: Lexx87
1 Replies

9. AIX

Setting AIX box at home.

Hi guys... I have got a old Aix box i.e. 7043 - 150 for home experimenting purposes. I am having some issues to setup the tcpip on it correctly, so that i can access it within the network and also from outside i.e. work. My setup looks like this: Modem ----> Apple airport wireless router... (2 Replies)
Discussion started by: uzair_rock
2 Replies

10. UNIX for Dummies Questions & Answers

Setting up a home network for learning Linux

I am working on learning Linux, and somebody suggested setting up Linux on a separate computer, and searching for answers to whatever may be needed, on a different computer plugged in to the Internet. I have a Windows 7 PC, plugged in to a cable modem, and an old notebook, Compaq Presario R3000... (5 Replies)
Discussion started by: AdultFoundry
5 Replies
CHFN(1) 						      Linux Reference Manual							   CHFN(1)

NAME
chfn - change your finger information SYNOPSIS
chfn [ -f full-name ] [ -o office ] [ -p office-phone ] [ -h home-phone ] [ -u ] [ -v ] [ username ] DESCRIPTION
chfn is used to change your finger information. This information is stored in the /etc/passwd file, and is displayed by the finger pro- gram. The Linux finger command will display four pieces of information that can be changed by chfn : your real name, your work room and phone, and your home phone. COMMAND LINE Any of the four pieces of information can be specified on the command line. If no information is given on the command line, chfn enters interactive mode. INTERACTIVE MODE In interactive mode, chfn will prompt for each field. At a prompt, you can enter the new information, or just press return to leave the field unchanged. Enter the keyword "none" to make the field blank. OPTIONS
-f, --full-name Specify your real name. -o, --office Specify your office room number. -p, --office-phone Specify your office phone number. -h, --home-phone Specify your home phone number. -u, --help Print a usage message and exit. -v, --version Print version information and exit. SEE ALSO
finger(1), passwd(5) AUTHOR
Salvatore Valente <svalente@mit.edu> chfn October 13 1994 CHFN(1)
All times are GMT -4. The time now is 10:48 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy