Disk duplicate in 10.20 Post: 302102622

Sponsored Content

Operating Systems HP-UX Disk duplicate in 10.20 Post 302102622 by pmoren on Thursday 11th of January 2007 04:40:55 PM

01-11-2007

Registered User

Sorry for the confusion; my new disk is in the adress c0t4d0 , I took information from various logs, thats why I have different adresses. I have only 2 disk, one is the original ( this has the operating system), and the new where the copy should be.

The new disk is a SEAGATE ST336607LW ( adress 4 c0t4d0)

The original disk is a :
disk 0 8/0/19/0.6.0 sdisk CLAIMED DEVICE SEAGATE
ST34572WS
/dev/dsk/c0t6d0 /dev/rdsk/c0t6d0

( also I try to do it from a ST336607LW that only have defined 4 gigas of a volume group, it was originally cloned from a ST34572WS , in both cases I fail)

My workstation is an HP Visualize b132L+.

Quote:

What commands do you use to boot off the second disk?

In the halt mode I do :
>SEA
>boot P1 (asuming that the new disk is in P1)

Quote:

Exactly what result do you get when you try to boot?

It start booting, then start to load the kernel, then a new screen appears, with a lot information ( something like memory addresses) and then reboots. This happens very fast, so I cant read the errors.

ANdryk: I can boot from my second disk,but it fails loading my kernel.
Thanks

pmoren

View Public Profile for pmoren

Find all posts by pmoren

6 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

How to duplicate a floppy disk

Hi there, I have a boot disk that I'd like to make a copy of. I can't just copy it through windows because windows obviously doesn't recognise the format. What would I have to do in SCO to just simply make a copy of this disk??

2. Solaris

( VxVM ) How to add the removed disk back to previous disk group

Previously , i remove the disk by #vxdg -g testdg -k rmdisk testdg02 But i got error when i -k adddisk bash-2.03# vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 auto:none - - online invalid c0t1d0s2 auto:none ...

3. Shell Programming and Scripting

Find duplicate based on 'n' fields and mark the duplicate as 'D'

Hi, In a file, I have to mark duplicate records as 'D' and the latest record alone as 'C'. In the below file, I have to identify if duplicate records are there or not based on Man_ID, Man_DT, Ship_ID and I have to mark the record with latest Ship_DT as "C" and other as "D" (I have to create...

4. Solaris

Df -k command shows duplicate information in Solaris machine, How to get the exact disk space

While getting the total disk space in solaris machine using df -k command, i am getting the same disk info for every user available in that system. Is there any way to remove it. Filesystem 1024-blocks Used Available Capacity Mounted on rpool/ROOT/solaris 573898752...

5. Shell Programming and Scripting

Find duplicate values in specific column and delete all the duplicate values

Dear folks I have a map file of around 54K lines and some of the values in the second column have the same value and I want to find them and delete all of the same values. I looked over duplicate commands but my case is not to keep one of the duplicate values. I want to remove all of the same...

6. Filesystems, Disks and Memory

DISK ARRAY PROTECTION SUSPENDED message displayed following disk replacement

Hello, On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active. We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED. ...

LEARN ABOUT OSF1

installboot

installboot(1M) 														   installboot(1M)

NAME

       installboot - install bootblocks in a disk partition

SYNOPSIS

       installboot bootblk raw-disk-device

       The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.

       The  ufs  boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
       found using the -i option of uname(1).

       The installboot utility is a SPARC only program. It is not supported on the  architecture.  users should use installgrub(1M) instead.

       bootblk	       The name of the bootblock code.

       raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is  read-
		       able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.

       Example 1: Installing UFS Boot Block

       To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:

	      example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk 
		   /dev/rdsk/c1t0d0s0

       /usr/platform/platform-name/lib/fs/ufs

	   directory where ufs boot objects reside.

       /platform/platform-name/ufsboot

	   second level program to boot from a disk or CD

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

       od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)

WARNINGS

       The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.

								    11 Apr 2005 						   installboot(1M)