|
|
Sponsored Content
Operating Systems
Linux
SuSE
Start Asterisk at boot?
Post 302099873 by hast5 on Thursday 14th of December 2006 11:00:53 AM
12-14-2006
Start Asterisk at boot?
Hello, I am running a SuSe 9.3 server. That have Asterisk. Asterisk are working fine/perfect. But what I want to do is to make it start up at boot.
When I have started the computer can I type:
sudo /root/Asterisk-1.0.8/Asterisk
And it goes of. No problem.
But I want it to do that by itself at start up. And as easy as possible so my first thoug was why not put in a script in: /etc/init.d/boot.local?
There did I write:
sudo /root/asterisk-1.0.8/Asterisk
rootpasswd
That dident work as I did think. The Asterisk was succesfully run but it dident manged to get out to the network. Because it had been exicuted before the network card was loadet. So I had to restart Asterisk and then did it work. But I dident work at startup.
I have been trying to place the script in the different placed as rc3.d that loads with the nettwork card and as S99Asterisk so it loads last. But it dosent work. Maybe bacause it do only write this:
sudo /root/asterisk-1.0.8/Asterisk
rootpasswd
But I dont know how to write a good boot script. If someone could help me out here. Would I be extremly happy.
Thanks for taking your time reading this.
NB: I know I have to many spelling errors.
When I have started the computer can I type:
sudo /root/Asterisk-1.0.8/Asterisk
And it goes of. No problem.
But I want it to do that by itself at start up. And as easy as possible so my first thoug was why not put in a script in: /etc/init.d/boot.local?
There did I write:
sudo /root/asterisk-1.0.8/Asterisk
rootpasswd
That dident work as I did think. The Asterisk was succesfully run but it dident manged to get out to the network. Because it had been exicuted before the network card was loadet. So I had to restart Asterisk and then did it work. But I dident work at startup.
I have been trying to place the script in the different placed as rc3.d that loads with the nettwork card and as S99Asterisk so it loads last. But it dosent work. Maybe bacause it do only write this:
sudo /root/asterisk-1.0.8/Asterisk
rootpasswd
But I dont know how to write a good boot script. If someone could help me out here. Would I be extremly happy.
Thanks for taking your time reading this.
NB: I know I have to many spelling errors.
|
|
9 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Dears,
I m using SCO V and running 3 different aplications (has different logins) constantly on the server console in 3 different screens.
I want to develop a script which can start the programms on booting the systems. OR If automatic login can be configured on different screens will help me... (1 Reply)
Discussion started by: skant
1 Replies
2. UNIX for Advanced & Expert Users
Hi,
I have a program that check the IP address and automatic update it to the DNS server. I would like to run this program when the computer bootup after pppd get a connection. How do I add it to the init file. Does any one have any information of how to do it.
I run a Linux Mandrake as a... (1 Reply)
Discussion started by: vtran4270
1 Replies
3. Solaris
Hi
Inexplicably, nfsd no longer starts automatically on our Sun boxes running Solaris 9, so that 'automount' no longer functions automatically. The problem first manifested itself when we could not access files on any of the nfs automounted directories in our LAN after one of the servers (say... (19 Replies)
Discussion started by: dcshungu
19 Replies
4. SuSE
My apache and ftp server is working fine but when I reboot the system ftp and web server is not running automatically. Please advise on how to start apache and ftp at boot. (9 Replies)
Discussion started by: real-chess
9 Replies
5. HP-UX
When I get start program at boot
I read which run level
/sbin/rcx.d runlevel=0.....x
only read directory which directory name has UpperCase 'S'
is not enough
someone says that I need to reference another file
which file I need to reference
1)/etc/rc.config.d/all file which parameter... (4 Replies)
Discussion started by: alert0919
4 Replies
6. Red Hat
Hello,
I am facing some issues during boot process of rhel 6.2
It takes too long time (~10 min) for the node to come up...
The boot process stuck while it trying to start NFS and does not continue until timeout.
In the boot.log file i see
Starting NFS quotas: Cannot register service:... (2 Replies)
Discussion started by: @dagio
2 Replies
7. UNIX for Dummies Questions & Answers
Hello,
after webmin install, it was running, but after reboot, i need webmin to start automatically. I need this to be done without editting anything in webmin mysql (setting it from webmin admin area).
So i tried chkconfig webmin on and added startup script to rc.local but still dont works..... (1 Reply)
Discussion started by: postcd
1 Replies
8. Red Hat
Hello,
I have an issue with iptables. The rules are already configured in /etc/sysconfig/iptables but when i reboot the node the service is not running or at least i can't see my rules.
Below the configuration i did to start the service during boot.
# chkconfig --list iptables
iptables... (1 Reply)
Discussion started by: @dagio
1 Replies
9. UNIX for Beginners Questions & Answers
When I power ON my T4-1, I got a prompt -> where I have to start /SYS and start /SP/console. How can I auto supply these two commands ? (3 Replies)
Discussion started by: z_haseeb
3 Replies
LEARN ABOUT DEBIAN
autosupport
AUTOSUPPORT(8) Linux Programmer's Manual AUTOSUPPORT(8) NAME
autosupport -- interactive script to provide Digium[tm]'s support with information SYNOPSIS
autosupport [OPTION] [prefix] DESCRIPTION
autosupport is a script that is normally run by a user contacting Digium's Technical Support to automate gathering support information. It will probe the system for some run-time and system information, and generate a backup of Asterisk related configuration. An optional param- eter for a prefix may be specified which is typically used to specify a Digium Technical Support Ticket ID. The script requires root privileges to run, and writes all output in the home directory of the user running the script. For the purposes of this document, this will be referred to as /root/ henceforth. The system information is written to /root/digiuminfo.txt and the backup of configuration (and the system information file) are written to a tarball in /root/ with a base name of digium-info. A Date Stamp will be appended, and if specified the optional parameter will be a pre- fix. The tarball at least is expected to be attached to a support ticket with Digium. OPTIONS
Arguments: prefix Used to prefix the file names. Typically a Digium Technical Support Ticket ID Options: -n, --non-interactive Run without requiring user input -h, --help Show help about options FILES
/root/digiuminfo.txt /root/digium-info_YYYYMMDD.tar.gz SEE ALSO
asterisk(8) AUTHOR
autosupport was written by John Bigelow <support@digium.com> in conjunction with Charles Moye and Trey Blancher. This manual page was writ- ten by Tzafrir Cohen <tzafrir.cohen@xorcom.com> and updated by Charles Moye. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation. On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL-2. autosupport Dec 14th, 2011 AUTOSUPPORT(8)