Can this be disabled? interface turned of when console cable plugged in. Post: 302098308

9 More Discussions You Might Find Interesting

1. HP-UX

Root account disabled and unable to access console

Hi, hope someone could help me here: Our root account was disabled on our production server this morning and usually we would login at the console to re-enable the account. However we are unable to get a login prompt at the console. The console displays the 8 options along the bottom and a...

2. Solaris

Is the cable you are using a null modem cable or a modem cable

Hi all, Is there any difference between a null modem cable or a modem cable ? i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup. please correct if i am wrong, thks

3. UNIX for Advanced & Expert Users

Detecting USB Flash Devices (plugged and hot-plugged)

I am trying to script the process of looking for a usb-key inside another application. I have gotten some success by recording "ls /dev" and comparing it to a new "ls /dev" periodically. However this has made it so I have to prompt the user to take out the usb-key (if plugged in), let my...

4. AIX

need AIX console cable

Hello ... I am newbie and will be very grateful for any help. I need a serial console cable for my AIX boxes (seems we have lost the one we had!). However I am confused about the one one to order - UK based if possible. I wonder if anyone can point me at a specific one or the exact spec i need to...

5. AIX

RJ-45 Console Cable Pinout

Does anyone have the pinout for the front RS-232 RJ-45 Port on IBM Power Server 5, 9131-52A? Of course the cabel is straight through, but on the DB9 side is what I need.

6. Shell Programming and Scripting

how to access console of a switch having rj45 on switch side to db 9 female on pc side console cable

hi, how to access console of a switch having rj45 on switch side to db 9 female on pc side console cable which needs to be connected to one console server having rj11 on its side and db 9 female on other end.i.e. on switch side,console cable has rj45 and db 9 pin female connector on other side of...

7. Red Hat

Different hostnames with reboot while lan cable, no lan cable

I am facing strange problem regarding hostname on my Linux(2.6.18-164.el5xen x86_64 GNU/Linux), the hostname changes if reboot with lan cable and with NO lan cable Reboot with lan cable: The hostname is ubunut Unable to connect Oracle database using sqlplus some times database is not...

8. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a...

9. Solaris

/var/adm/messages (interface turned off/restored) and link up & link down message.

Hi All I am facing an issue with our new solaris machine. in /var/adm/messages root@Prod-App1:/var/tmp# root@Prod-App1:/var/tmp# root@Prod-App1:/var/tmp# cat /var/adm//messages Apr 20 03:10:01 Prod-App1 syslogd: line 25: WARNING: loghost could not be resolved Apr 20 08:24:18 Prod-App1...

LEARN ABOUT DEBIAN

mrtg-ping-probe

MRTG-PING-PROBE(1)					      General Commands Manual						MRTG-PING-PROBE(1)

NAME

       mrtg-ping-probe - ping probe module for Multi Router Traffic Grapher

DESCRIPTION

       mrtg-ping-probe is a ping probe module for MRTG 2.x.  It is used to monitor the round trip time and packet loss to networked devices.  MRTG
       uses the output of mrtg-ping-probe to generate graphs visualizing minimum and maximum round trip times or packet loss.

       mrtg-ping-probe is not run directly, but is called by MRTG as a helper when it needs to determine ping time to a host.

       Act responsibly: do not use mrtg-ping-probe to ping devices without the owner's permission.  Just imagine if 10,000 people decided to  ping
       your hosts!  mrtg-ping-probe is meant to be used within your network to get round trip time performance figures for your network.

OPTIONS

       To  use	mrtg-ping-probe you need to configure MRTG to call it from within the definition of a target host. This is done in the MRTG config
       file, which is usually /etc/mrtg.conf.

       Here's an example snippet: change the target name and IP address to suit your needs.

       Target[your.target.ping]: `/usr/bin/mrtg-ping-probe 123.456.789.123`
       SetEnv[your.target.ping]: MRTG_INT_IP="123.456.789.123" MRTG_INT_DESCR="ping"
       MaxBytes[your.target.ping]: 100
       AbsMax[your.target.ping]: 200
       Options[your.target.ping]: gauge, growright
       YLegend[your.target.ping]: ping time (ms)
       ShortLegend[your.target.ping]: ms
       Legend1[your.target.ping]: Maximum Round Trip Time in ms
       Legend2[your.target.ping]: Minimum Round Trip Time in ms
       Legend3[your.target.ping]: Maximal 5 Minute Maximum Round Trip Time in ms
       Legend4[your.target.ping]: Maximal 5 Minute Minimum Round Trip Time in ms
       LegendI[your.target.ping]: &nbsp;Max:
       LegendO[your.target.ping]: &nbsp;Min:

       Pay close attention to the backticks in the first line which tell MRTG to execute the nominated external program. Note also that  you  need
       to use the "gauge" option, since the results of subsequent ping probes are independant values and not an incrementing counter.

SEE ALSO

       mrtg(1).

       The latest release of mrtg-ping-probe can be found on the web at http://pwo.de/projects/mrtg/

AUTHOR

       This manual page was written by Jonathan Oxer <jon@debian.org>, for the Debian project (but may be used by others).

								  April 14, 2003						MRTG-PING-PROBE(1)