10-08-2006
plz ,
go to /etc/defaultrouter and check it
10 More Discussions You Might Find Interesting
1. IP Networking
I have a Unix box with 2 network interfaces on the same IP subnet and would like to add a host route via a specific interface. Any assistance would be greatly appreciated. (3 Replies)
Discussion started by: diemos
3 Replies
2. Debian
Ok, I made changes to my routing tables..... which file do I modify to make the routes initialize correctly when the machine boots up? I work with all flavours of Unix/Linux... but this is an older box...
Linux, Release 2.2.14-5.0.
I did a grep for the default route in /etc, but didnt find... (2 Replies)
Discussion started by: djsal
2 Replies
3. AIX
Hi All,
I have a AIX server running v5.2 and its having multiple default routes configured to two seperate gateway.
Here's the output of -- netstat -rn
Routing tables
Destination Gateway Flags Refs Use If PMTU Exp Groups
Route Tree for Protocol Family 2... (2 Replies)
Discussion started by: rramanuj
2 Replies
4. Solaris
Solaris Guru's
What is the proper way to add routes in the routing table so after a node reboot the routes will not be lost.
I understand the /etc/defaultrouter for the default router
and the <route add> command but using this command routes will be removed once the node reboots.
Thanks (7 Replies)
Discussion started by: Brad_52000
7 Replies
5. IP Networking
Hi,
How can i delete the following routes on my OpenBSD 4.1 system?
# route -n show (including only relevant ipv6-routes)
Internet6:
Destination Gateway Flags Refs Use Mtu Interface
::/104 ::1 UGRS 1 0 ... (1 Reply)
Discussion started by: phalcos
1 Replies
6. AIX
I added a static route through smit using:
Communications applications and Services ==>
TCIP/IP ==>
Further Configuration ==>
Static Routes ==>
Add a Static Route ==>
Route Type of host
Filled in Destination Address, Default Gateway Address and Network Interface of en0.
This... (2 Replies)
Discussion started by: jyoung
2 Replies
7. UNIX for Dummies Questions & Answers
Hello,
I have two AIX 5.3 servers that are supposedly set up exactly the same. The problem I am having is on one of the servers, it seems dynamic routes are being added mysteriously and non-periodically. This only happens on one server and not the other. Also, there doesn't seem to be a specific... (1 Reply)
Discussion started by: Conutmonky
1 Replies
8. IP Networking
I would really appreciate some help with HP UX's Network Routes.
Basically, what I want to do is, I would want a system with global ip (eg: 202.144.138.122) to ping/access my HP-UX server which is with private IP address (192.168.1.23). I have all the routers/switches in between properly route... (2 Replies)
Discussion started by: damchey
2 Replies
9. SCO
Hi,
Just a question of thought. Why one needs to add static routes on Unix servers ? If I had ethernet card, it already has the settings for gateway for incoming and outgoing requests. We donot have to explicitly set the route it should take. Then what is the use... (3 Replies)
Discussion started by: dextergenious
3 Replies
10. Solaris
Hello All,
I have a Solaris 10 machine with 4 physical network interfaces configured viz. igb0, e1000g0, igb2 and e1000g2.
Out of these interfaces, I am routing all my normal monitoring and O&M activities via. igb0 and e1000g0 interfaces.
However, I am facing an issue on one of the... (4 Replies)
Discussion started by: mystition
4 Replies
LEARN ABOUT XFREE86
defaultrouter
defaultrouter(4) File Formats defaultrouter(4)
NAME
defaultrouter - configuration file for default router(s)
SYNOPSIS
/etc/defaultrouter
DESCRIPTION
The /etc/defaultrouter file specifies a IPv4 host's default router(s).
The format of the file is as follows:
IP_address
...
The /etc/defaultrouter file can contain the IP addresses or hostnames of one or more default routers, with each entry on its own line. If
you use hostnames, each hostname must also be listed in the local /etc/hosts file, because no name services are running at the time that
defaultrouter is read.
Lines beginning with the ``#'' character are treated as comments.
The default routes listed in this file replace those added by the kernel during diskless booting. An empty /etc/defaultrouter file will
cause the default route added by the kernel to be deleted.
Use of a default route, whether received from a DHCP server or from /etc/defaultrouter, prevents a machine from acting as an IPv4 router.
You can use routeadm(1M) to override this behavior.
FILES
/etc/defaultrouter Configuration file containing the hostnames or IP addresses of one or more default routers.
SEE ALSO
in.rdisc(1M), in.routed(1M), routeadm(1M), hosts(4)
SunOS 5.10 17 Aug 2004 defaultrouter(4)