Sponsored Content
Operating Systems HP-UX 11.0 fresh install: I never see CDE Login Post 302081049 by ErikTheHAck on Friday 21st of July 2006 01:59:42 PM
Old 07-21-2006
Quote:
Originally Posted by Ebbi
Does it work now?

I also had problems with the auto_master, but it was no problem to comment the line and have the system booting without delay.
Actually I was waiting to hear back from you before I commented the line out again. I thought NOT having it may have gotten me through the boot up but may have been what it hanging CDE starting.

I read something somewhere yesterday that gave me pause: It said that if your hostname is not registered with the DNS server that CDE wouldn't start. Do you know anything about this? I've got the machine sitting behind a net sharing router in my office at work. It's a double DHCP setup. The router uses DHCP to get it's IP and other info AND the 712 is setup to use DHCP to get it's info from the router. There's no way that IT is going to add this machine to our corp DNS server. Am I boned?
 

8 More Discussions You Might Find Interesting

1. AIX

Root password for fresh 5.1 install on 43p-140?

I've installed AIX 5.1 on a 43p-140, but am unable to log in. At no point in the install did it ask me for a root password. When it boots to the console prompt, I enter "root" as a username, and then after 1 second it cycles right back to another root prompt. I am accessing the 43p-140... (4 Replies)
Discussion started by: akbar
4 Replies

2. Solaris

Only LAN access after fresh install

Hello, For whatever reason, after installing Solaris 10 I can ping anything within my own LAN, including the router which is also set as the default gateway, but I have no internet connectivity with it. At first I thought this was a DNS issue, but I can't connect with external IP addresses... (3 Replies)
Discussion started by: Quadratic
3 Replies

3. Solaris

Not able to login through JDS but able to login through CDE

Dear All I am in a strange situation where I have install the Solaris 10 5/08 OS on Netra 1280 server. When I connect it through my laptop so that I can take the GUI from xmanager. When I try to login as root or any other users also through Java Destop Environment which accepted it after few... (3 Replies)
Discussion started by: girish.batra
3 Replies

4. Solaris

Fresh install of solaris 10 using an ISO

Hi all Im rebuilding an 6800 domain with solaris 10. Server is located in a different town and cant be bothered to drive down and install a dvd into its drive. So, apart from jumpstarting it and using a local DVD, is there a way I can an ISO image to build a new client ?? eg. mount an ISO... (2 Replies)
Discussion started by: sbk1972
2 Replies

5. Solaris

Solaris 8 fresh install halts

Installing Solaris 8 for the first time...on a SunBlade 100. I have original Solaris 8 CD's. About 45 minutes into the installation, the install halts with the following errors: ERROR: Could not open file /a/etc/vfstab ERROR: Could not create the file system mount table /etc/vfstab I... (4 Replies)
Discussion started by: cdunavent
4 Replies

6. AIX

ISCSI poor performance 1.5MB/s fresh install AIX7.1

Hi Everyone, I have been struggling for few days with iSCSI and thought I could get some help on the forum... fresh install of AIX7.1 TL4 on Power 710, The rootvg relies on 3 SAS disks in RAID 0, 32GB Memory The lpar Profile is using all of the managed system's resources. I have connected... (11 Replies)
Discussion started by: frenchy59
11 Replies

7. Debian

Debian fresh install blinking cursor meaning?

Hello, I have downloaded and install debian in computer it is blinking cursor what this mean? (6 Replies)
Discussion started by: Riteshkakkar
6 Replies

8. Solaris

Fresh Install - Boot Load Failed

I have M10-1. Installation OS 10 from cdrom external. Here message from OK Prompt {0} ok probe-scsi-all /pci@8000/pci@4/pci@0/pci@2/pci@0/usb@4,1/cdrom@1 Unit 0 Removable Read Only device HL-DT-STDVDRAM GP65NB60 PF00 But.. {0} ok boot... (3 Replies)
Discussion started by: mbahjiman
3 Replies
defaultrouter(4)						   File Formats 						  defaultrouter(4)

NAME
defaultrouter - configuration file for default router(s) SYNOPSIS
/etc/defaultrouter DESCRIPTION
The /etc/defaultrouter file specifies a IPv4 host's default router(s). The format of the file is as follows: IP_address ... The /etc/defaultrouter file can contain the IP addresses or hostnames of one or more default routers, with each entry on its own line. If you use hostnames, each hostname must also be listed in the local /etc/hosts file, because no name services are running at the time that defaultrouter is read. Lines beginning with the ``#'' character are treated as comments. The default routes listed in this file replace those added by the kernel during diskless booting. An empty /etc/defaultrouter file will cause the default route added by the kernel to be deleted. Use of a default route, whether received from a DHCP server or from /etc/defaultrouter, prevents a machine from acting as an IPv4 router. You can use routeadm(1M) to override this behavior. FILES
/etc/defaultrouter Configuration file containing the hostnames or IP addresses of one or more default routers. SEE ALSO
in.rdisc(1M), in.routed(1M), routeadm(1M), hosts(4) SunOS 5.10 17 Aug 2004 defaultrouter(4)
All times are GMT -4. The time now is 07:44 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy