07-18-2006
Mirror solaris
Hi everyone.
I have a Sun Solaris box which is running on only one internal disk and obviously that is not a good thing, if the disk should fail. This is a pritty straight forward operation in AIX, where my experties are. I have never done this in solaris and would therefore appriciate any help on this matter.
Basicly I would like to know how this is done, from the point in time where I insert the disk in the machine and until the mirror is up and in sync. Anyone?
9 More Discussions You Might Find Interesting
1. Solaris
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
Discussion started by: deal732
3 Replies
2. Solaris
Hi All,
How do I break the solaris 8 mirror? And how do I make sure I will point the first hd mirror on reboot.
If the first break mirror won't boot. How do I make the copy mirror to boot?
Thanks in advance,
itik (2 Replies)
Discussion started by: itik
2 Replies
3. Solaris
Hi everyone,
Normally it always easier in Sparc machine, i can set or manually use the boot-device in NVram to boot the mirrored disk. However I have a big trouble about x86 mirror for a long time. I have been doing anything i can: search document, google, ask the others.
Recently i did as... (5 Replies)
Discussion started by: tien86
5 Replies
4. Solaris
hi,
I'm newbie in Solaris 10. can someone explain me the steps of how to create mirror disk in Solaris machine.
thanks in advance (5 Replies)
Discussion started by: Wong_Cilacap
5 Replies
5. Solaris
I’m setting up a boot disk mirror on Solaris 10 x86. I’m used to doing it on SPARC, where you can copy the partition table using fmthard. My x86 boot disk has 2 primary partitions, a Solaris one and a diagnostic one. Is there a way to copy those 2 primary partitions to the second disk without... (6 Replies)
Discussion started by: TKD
6 Replies
6. Solaris
hi friends, need help.. it is my first time patching using mirror disk backup approach, not so sure about the steps :confused: how do you detach, patch it, boot it and reattach it ? any kind soul here can advise ? thanks in advance..:)
below is the information from my machine:
Filesystem ... (3 Replies)
Discussion started by: Exposure
3 Replies
7. Solaris
Dear All
I have question and I want some one to answer it ..
in Solaris 10 I have two mirrors as below .. c3t0d0s0 & c3t1d0s0
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
... (1 Reply)
Discussion started by: top.level
1 Replies
8. HP-UX
what is the difference between DRD and Root Mirror Disk using LVM mirror ? (3 Replies)
Discussion started by: maxim42
3 Replies
9. Solaris
We have Proliant DL380 G2 running Solaris 9 x86
There are 6 physical disks installed which I believe are mirrored at hardware level to 3 sets to present 3 disks to the OS.
Is there any way to check the mirror status at OS level ?
I am guessing not and it may need a trip to site as we have no... (4 Replies)
Discussion started by: frustrated1
4 Replies
LEARN ABOUT OSF1
volmirror
volmirror(8) System Manager's Manual volmirror(8)
NAME
volmirror - Mirrors volumes on a disk or control default mirroring
SYNOPSIS
/usr/sbin/volmirror [-g diskgroup] [-d yes|no] medianame [new_medianame...]
/usr/sbin/volmirror [-g diskgroup] [-d yes|no] -a [new_medianame...]
/usr/sbin/volmirror [-g diskgroup] [-d yes|no]
/usr/sbin/volmirror [-g diskgroup] -D
OPTIONS
The volmirror command supports the following options: Limits operation of the command to the given disk group, as specified by disk group
ID or disk group name. The medianame operands will be evaluated relative to the given disk group. If no disk group is supplied to the
volmirror command, rootdg is presumed. Changes the default for subsequent volume creation, depending on the option argument. If the option
argument is yes, all subsequent volumes created using the volassist command will automatically be created as mirrored volumes. If the
option argument supplied is no, mirroring will be turned off for future volumes by default. Displays current default status for mirroring.
Mirrors all existing volumes for the specified disk group.
DESCRIPTION
The volmirror command provides a mechanism to mirror all the contents of a specified disk, to mirror all currently unmirrored volumes in
the specified disk group, or to change or display the current defaults for mirroring. All volumes that have only a single plex (mirror
copy), will be mirrored by adding an additional plex.
Volumes containing subdisks that reside on more than one disk will not be mirrored by volmirror.
The volmirror command is generally called from the voldiskadm menus. It is not an interactive command and once called, will continue until
completion of the operation or until a failure is detected.
Note
Due to the nature of generating mirror copies of volumes, this command may take a considerable time to complete.
In the first listed form of the command, the disk media name is supplied on the command line to volmirror. That name is taken to be the
only disk from which volumes should be mirrored. In the case of mirroring volumes from a specified disk, only simple single-subdisk volumes
are mirrored.
In the first and second listed forms of the command, the new_medianame ... parameter identifies a new disk media name (or set of names).
The mirroring operation being performed will use these names as targets on which to allocate the mirrors. An error will result if the same
disk is specified for both the source and target disk and if no other viable targets are supplied.
EXAMPLES
The following are examples of the use of the volmirror command. The following command mirrors the contents of the disk named disk01 to any
available space on any available disk. Subsequent calls to volassist will cause created volumes to be mirrored by default. volmirror -d
yes disk01 The following command displays the current status of default mirroring. It prints the string yes if mirroring is currently
enabled or no, if not. volmirror -D The following command mirrors any volumes on disk02 onto disk03. volmirror disk02 disk03
FILES
The defaults file for volassist parameters.
SEE ALSO
volintro(8), volassist(8), volrootmir(8)
volmirror(8)