is the cdrom mounted, or are you doing everything inside an initrd? If you're just in an initrd, do something like
If your /mnt/ is not writable, substitute /tmp/ or whatever.
Hi,
I need to be able to make a back bootable CD for Solaris 7 + software on the system. As stated the CD needs to be a bootable one, I know it will more then likely have to be more then 1 CD and I don't mind.
What would be a good program to do this? Also the best way to go about doing it.... (1 Reply)
Hey all,
I'm trying to make a backup bootable CD of a solaris 7 machine. I have no idea where to start so I did alot a reading :-) Even though I've done alot of reading I still don't know what is the best way of going about it all.
What I am after as a finished result is a bootable CD... (1 Reply)
how can i create a bootable cd? i have the .iso thingy, and now i only need to put it on the cd, but do i need something special to do it w/? or just burn it right onto the cd? Ive already set cd to 1st in bios.
thanx anyways (1 Reply)
Hi,
I want to create a CD that is bootable containing a working Linux OS ie OS runs from CD and not harddrive.
Will probably install Linux to a 650GB partition , including all the bits I need.
How would I then use this partition to create a working CD?
Ideas and Web sites with info very... (5 Replies)
In my present dual boot (Fedora Core 4 & WinXP2003 Server) desktop computer, I have redundant 100GB disk drives.
Every so often I boot fedora core 4 and
telinit 1
cp /dev/sda /dev/sdb
and then I reverse the connections to the drives so I boot from the newly created copy.
I just ordered... (2 Replies)
In our HP/Unix system, our master scsi drive was bootable and our mirrored drive was non-bootable. Are any of these alternatives possible:
1) Make the non-bootable scsi drive bootable? How?
2) Create a bootable scsi drive, then copy the mirrored data to the newly created scsi drive?
I seek... (1 Reply)
Hi,
How can i determine the /dev/scd0 is bootable or not from command-line with single-line command according to ElTorito specification or something else?
Regards, (2 Replies)
I've been working with SCO Unix for several years now but have never had to restore a system from a bare drive.
I have a bootable CD that contains what appears to be the correct files necessary to recover the boot and root filesystems.
I've got the BIOS setup such that the CD is the first... (12 Replies)
Hi all!
I trying to modify my bootable thumbdrive to be seen in window OS when i plug in. I did a FAT32 partition for it but it seem like!
"windows only recognizes the first primary partition on a removable device"
My 1st partition is my Ubuntu OS partition ext4, is there a way to go about... (4 Replies)
Discussion started by: GQiang
4 Replies
LEARN ABOUT SUNOS
root_archive
root_archive(1M)root_archive(1M)NAME
root_archive - manage bootable miniroot archives
SYNOPSIS
/boot/solaris/bin/root_archive pack archive root
/boot/solaris/bin/root_archive unpack archive root
/boot/solaris/bin/root_archive packmedia solaris_image root
/boot/solaris/bin/root_archive unpackmedia solaris_image root
The root_archive utility is used to manage bootable miniroot archives and is currently only available on platforms. The utility can pack
and unpack boot/root archives in both ufs and hsfs (iso9660) format. It will always generate ufs archives.
root_archive also uses the lofi file driver to export a file as a block device (see lofi(7D)) and mount to mount or unmount file systems
and remote resources (see mount(1M)). root_archive requires the same privileges that are needed to run these commands.
SUBCOMMANDS
The root_archive command has the following subcommands:
pack archive root
Pack from the image found under the root directory to the archive.
unpack archive root
Unpack from the archive to an unpacked image under the root directory.
packmedia solaris_image root
Pack the solaris image to the root directory.
unpackmedia solaris_image root
Unpack the solaris image from the root directory.
For packmedia and unpackmedia, other items that do not go into the ramdisk image are copied or uncopied (see cpio(1)) as well. Specifi-
cally, this includes all the packaging databases needed for pkgadd and the other packaging utilities to succeed which are not used in the
running and hence pruned to conserve memory.
EXAMPLES
Example 1: Unpacking the Solaris x86 install image
The following command unpacks the current Solaris image from the root directory:
# root_archive unpackmedia
/export/nv/solarisdvd.nvx_dvd/latest /export/Boot
Where /export/nv/solarisdvd.nvx_dvd/latest represents a path to a Solaris x86 install image and /export/Boot is a directory that will be
purged or created, as necessary.
Example 2: Packing the Solaris x86 install image
The following command packs the current Solaris image to the root directory:
# root_archive packmedia
/export/nv/solarisdvd.nvx_dvd/latest /export/Boot
The following exit values are returned:
0
The command completed successfully.
1
The command exited due to an error.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Stable |
+-----------------------------+-----------------------------+
cpio(1), bootadm(1M), mount(1M), attributes(5), lofi(7D)
26 Sep 2005 root_archive(1M)