NIC troubles with Redhat 9.0 Post: 302073296

9 More Discussions You Might Find Interesting

1. Programming

Troubles with HPUX

Hello I created an application in c language for HP-UX operative system,and it runs on a 32 bits PARISC processor. My problem is that I have to run this same application but now in a 64 bits Parisc processor. But I am not able to compile the application with the 64 bit server, and I only could use...

2. UNIX for Dummies Questions & Answers

ssh2 troubles

I'm trying to set up a secure and trusted connection between 2 boxes running solaris using ssh2. I've run ssh-keygen2 on the local box and on the remote box, created the identification file ( IdKey id_dsa_2048_a ) on the local machine and copied across the public key file from the local to...

3. HP-UX

cron troubles

I have a cronjob that I need to run everyday and it needs to have todays date inputed, here is what I have, but is not working as expected.......... 23 02 * * * cd /path;./RequestSummaryReport.sh $(date +%Y-%m-%d) the output from mail gives me............. Date: Fri, 8 Feb 2008 02:12:07...

4. HP-UX

how can I determine which NIC card is virtual NIC Card

how can I determine which NIC card is virtual NIC Card which condition can make a decision Does HP UX have Virtual Network Adapter Concept if ,it has where I can Find if I Install Virutal Network Adapter or which command that i can get it or which software can generate thanks

5. Shell Programming and Scripting

Encoding troubles

Hello All I have a set of files, each one containing some lines that follows that regex: regex='disabled\,.*\,\".*\"'and here is what file says about each files: file <random file> <random file> ASCII text, with CRLF line terminatorsSo, as an example, here is what a file ("Daffy Duck - The...

6. Solaris

x86 Solaris 10 nic driver added but not attached. NIC is not detected.

I couldn't install my nic in solaris 10. I compiled and added the driver but failed to attach the driver and ifconfig output shows only loopback dev. Please see the following output and tell me whether my nic has been detected and why the driver failed to attach? My nic is detected in linux...

7. IP Networking

squid proxy: one NIC for inbound & one NIC for outbound?

I am new in squid proxy. My question is how to (and if it's necessary) to set one NIC for inbound traffic (http requests) and one NIC for outbound traffic (http answers)? Thank you in advance!

8. Red Hat

I want to tune NIC's rps, rfs and xps value. which NIC device should I modify.

Dear All I want tune my NIC's rps, rfs and xps value. In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1). Here is the question? Which device should I modify ? eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0) Any advice is welcome....

9. Linux

Add two different subnet public IPs to single NIC or two different NIC on same box

Hello Admins, My ask is how can I add two different subnet IPs to same box with two different gateways? The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware. How can I get connected...

LEARN ABOUT DEBIAN

rtl8139-diag

RTL8139-DIAG(8) 					      System Manager's Manual						   RTL8139-DIAG(8)

NAME

       rtl8139-diag - EEPROM setup and diagnostic program for ethernet cards based on the Realtek 8129 and 8139 chips.

SYNOPSIS

       rtl8139-diag [options]

DESCRIPTION

       rtl8139-diag is a program that you can use to diagnose problems with ethernet cards based on the Realtek 8129 or 8139 chip series.

OPTIONS

       These  programs	follow	the  usual  GNU  command  line	syntax, with long options starting with two dashes (`-').  A summary of options is
       included below.

       -h, --help
	      Show summary of options.

       -V, --version
	      Show version of program.

       -v, --verbose
	      Verbose mode.

       -q, --quiet
	      Be very unverbose.

       -# <cardnum>
	      Use card number <cardnum>.

       -a, --show_all_registers
	      Print all registers.

       -e, --show-eeprom
	      Dump EEPROM contents to stdout.

       -E, --emergency-rewrite
	      Re-write a corrupted EEPROM.

       -p, --base-address <port>
	      Specify port to use.

       -A, --Advertise <mediaype>
	      Advertise media type. Valid Options are: 10baseT, 100baseT4, 100baseTx, 100baseTx-FD, 100baseTx-HD, 10baseT-FD and 10baseHD.

       -F, --new-interface <interface>
	      Interface number. Options that make sense are: 10baseT, 10base2, AUI, 100baseTx, 10baseT-FDX, 100baseTx-FDX,  100baseT4,	100baseFx,
	      100baseFx-FDX, MII, Autosense and Autonegotiate.

       -H, --new-hwaddress <address>
	      Set card to a new hardware address.

       -m, --show-mii
	      Dump MII management registers.

       -R, --reset
	      Reset the transceiver.

       -T, --test
	      Do register and SRAM test.

       -w, --write-EEPROM <values>
	      Write to the EEPROMS with the specified values. Do not use this, if you do not know what you do!

       -f, --force-detection
	      Try to identify the card, even if it is active.

       -t, --chip-type <card>
	      Explicitly set the chip. To get all valid numbers, run rtl8139-diag with the options '-t -1'.

SEE ALSO

       mii-diag(8)

AUTHOR

       rtl8139-diag  was  written  and	is  still maintained by Donald Becker <becker@scyld.com>.  This manual page was written by Alain Schroeder
       <alain@debian.org>, for the Debian GNU/Linux system (but may be used by others).

								 February 18, 2002						   RTL8139-DIAG(8)