fc cables Post: 302072487

6 More Discussions You Might Find Interesting

1. Solaris

Scsi cables - which ones?

Is there any specific scsi cables that you need to get when connecting a tape drive or external storage or does one type of cable fit all? ie. I can buy the following: HD68 to HD68 with Ferrites supports S-E Ultra/Wide transfer rates. But will this work for tape drives and storage? I...

2. Solaris

1 or 2 Fiber cables?

Hi Community, I'm working on Solaris 10 installation with 1 Server V490 and 1 StoredgeTek 3510 (Standalone configuration). I'd connect the Server to the Storedge with a fiber cable but I' m in doubt becouse I don't know if using 1 or 2 fiber cable. Could you provide me any solution? ...

3. Solaris

SUNFIRE V240 procedure to shutdown with safety in order to replace power cables

Question: Which commands to use to shutdown with safety the server;

4. Hardware

Flat cables vs normal circular cables

Do flat cables have any advantage over normal circular cables? I was looking at this. 6ft 2M Flat USB Sync Data Cable Charger Cord for iPhone4 4S 3G iPad1 2 3 Orange | eBay

5. War Stories

Following Cables for Fun!

Hi Folks, I came accross this picture taken a number of years ago now, I just thought I'd share it with you guys. We were in the process of removing equipment from the Data Centre and had followed the cable through to this area, where one of the old patch areas had been. When we lifted the...

6. IP Networking

What RJ11 Cables Should I Use?

Hello All, I have a project I'm working on which involves a linux PC and a USB (*dialup) Modem in a remote location for telnet'ing to that PC by phone when the Ethernet connection is down. I have already purchased the USB modems I need and some dumb phones for line testing... Now I'm trying...

LEARN ABOUT DEBIAN

vde_pcapplug

VDE_PCAPPLUG(1) 					      General Commands Manual						   VDE_PCAPPLUG(1)

NAME

       vde_pcapplug - Virtual Distributed Ethernet libpcap cable

SYNOPSIS

       vde_pcapplug [OPTION]... interface

DESCRIPTION

       vde_pcapplug  is  a plug to be connected into a VDE switch.  All the data that is catched by the plug is injected into interface and every-
       thing from that interface is sent in the switch.

OPTIONS

       -p, --port=portnum
	      It is possible to decide which port of the switch to use.  When this option is not specified the switch assigns the first  available
	      unused  port  (if  any).	It is possible to connect several cables in the same switch port: in this way all this cables work concur-
	      rently.  It means that packet can result as duplicate but no ARP table loops are generated.  Is useful when vde is used  for  mobil-
	      ity. Several physical interfaces can be used at a time during handoffs to prevent hichups in connectivity.

       -g, --group=group
	      group  ownership	of the communication socket. For security when more want to share a switch it is better to use a unix group to own
	      the comm sockets so that the network traffic cannot be sniffed.

       -m, --mod=octal-mode
	      octal chmod like permissions for the comm sockets

       -s, --sock=socket
	      specify the UNIX socket to be used by local programs for joining the VDE.  The default value is "/tmp/vde.ctl".

       -d, --daemon
	      start vde_plug2tap as a background process

       -P, --pidfile=pidfile
	      put the process ID of vde_plug2tap in pidfile. Can be used with --daemon to store the PID for future killing.

       -h, --help
	      show a brief help

NOTICE

       Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik  und  Informationstechnik"
       i.e. the German "Association for Electrical, Electronic & Information Technologies").

SEE ALSO

       vde_switch(1), vde_plug(1), vdeq(1), dpipe(1).

AUTHOR

       VDE is a project by Renzo Davoli <renzo@cs.unibo.it>

Virtual Distributed Ethernet					  August 20, 2008						   VDE_PCAPPLUG(1)