Sponsored Content
Operating Systems Solaris Problem with SCSI DAT drive on Ultra 10 Post 302071293 by Argathi on Friday 14th of April 2006 03:35:19 AM
Old 04-14-2006
Hi Matt,
You should see your tape device if you run a probe-scsi-all from the OBP prompt. To do this without hanging up the system, halt to OBP, set the auto-boot? parameter to false with 'setenv auto-boot? false', issue a 'reset-all' and when the unit comes up to the ok prompt run 'probe-scsi-all'. This should display the full path to the tape device which you can then either boot directly or create a devalias for.
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Ultra 3 scsi card

Ok guys I need all the help I can get right now. I have a Ultra 60 sun server and I can't get a ultra 3 scsi card to work in it . When I install the card the system will not boot correctly and I come up with errors that say: pcipsy0: This is block Can someone please help me. I trying to hook... (2 Replies)
Discussion started by: aojmoj
2 Replies

2. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies

3. SCO

configure Adaptec 29320ALP Ultra 320 SCSI Card in IBM X3400

I am installing SCO UNIX 5.0.6 in X3400, every thing are install except Adaptec 29320ALP Card (Attached DAT Drive) because their driver are available in btld formate Fllopy DISk and SCO Unix 5.0.6 not support USB Floppy, Can anybody inform us any other method to installed the Adaptec Ultra 120... (3 Replies)
Discussion started by: hafizurr
3 Replies

4. SCO

ultra 320 scsi raid controller driver for sco 5.0.6

I am facing a problem to install sco 5.0.6 in Dell Power Edge SC1420 which raid controller is ultra 320 scsi raid controller . how/from where to download the ultra 320 scsi raid controller driver for sco 5.0.6. Plz help with any idea karzon (1 Reply)
Discussion started by: karzon
1 Replies

5. SCO

DAT drive problem in sco

my server os version is openserver 5.0.6.from past few days it is giving problem while taking backup.it is giving error such that "TAPE WRITE ERROR".anyone can help to come out of this. (3 Replies)
Discussion started by: prakrithi
3 Replies

6. AIX

How to install a DAT drive on AIX.

Hello, we are trying to install an HP DAT drive on an IBM AIX RS6000 server. We have attached the SCSI connection and power cylced the unit, but still cannot see the device in smit. I am only a couple months into AIX, so I am very green! The server we are working on is in a lab environment,... (2 Replies)
Discussion started by: dayinthelife
2 Replies

7. SCO

configure DAT drive usb

hi all, how i can configure a DAT drive usb under SCO os 6.0.0 thank you (0 Replies)
Discussion started by: lid-j-one
0 Replies

8. Solaris

external tape drive DAT 72 problem

Hi all, I have solaris 10 sparc running and working very well but i have problem with external SCSI tape drive DAT 72 problem it seems to me the tape drive is manufactured by SUN microsystems when i ran ls -l /dev/rmt/0 it reveals the following output bash-3.00# mt -f /dev/rmt/0... (2 Replies)
Discussion started by: h@foorsa.biz
2 Replies

9. Solaris

Connect an External SCSI Hard Drive to Ultra 80

Guys, I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem. I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80. I connected it powered it up and at OK prompt did : boot -r system comes up and complains about not... (6 Replies)
Discussion started by: ajnabi
6 Replies

10. Hardware

Help with scsi tape drive problem

I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Discussion started by: powwm
0 Replies
ADV(4)							   BSD Kernel Interfaces Manual 						    ADV(4)

NAME
adv -- ConnectCom Solutions AdvanSys SCSI adapter driver SYNOPSIS
adv* at pci? dev ? function ? adv0 at isa? port ? irq ? drq ? adv* at cardbus? function ? scsibus* at adv? DESCRIPTION
The adv driver supports the following AdvanSys SCSI host adapters PCI bus Connectivity Products: ABP920 Bus-Master PCI (16 CDB) ABP930 Bus-Master PCI (16 CDB) (note 1) ABP930U Bus-Master PCI Ultra (16 CDB) ABP930UA Bus-Master PCI Ultra (16 CDB) ABP960 Bus-Master PCI MAC/PC (16 CDB) (note 2) ABP960U Bus-Master PCI MAC/PC Ultra (16 CDB) (note 2) Notes: 1. This board has been sold by SIIG as the Fast SCSI Pro PCI. 2. This board has been sold by Iomega as a Jaz Jet PCI adapter. Single Channel Products: ABP940 Bus-Master PCI (240 CDB) ABP940U Bus-Master PCI Ultra (240 CDB) ABP970 Bus-Master PCI MAC/PC (240 CDB) ABP970U Bus-Master PCI MAC/PC Ultra (240 CDB) ABP940UW Bus-Master PCI Ultra-Wide (240 CDB) Multi Channel Products: ABP950 Dual Channel Bus-Master PCI (240 CDB Per Channel) ABP980 Four Channel Bus-Master PCI (240 CDB Per Channel) ABP980U Four Channel Bus-Master PCI Ultra (240 CDB Per Channel) ISA bus Connectivity Products: ABP510/5150 Bus-Master ISA (240 CDB) (note 1) ABP5140 Bus-Master ISA (16 CDB) (note 1) (note 2) ABP5142 Bus-Master ISA with floppy (16 CDB) (note 3) Notes: 1. This board has been shipped by HP with the 4020i CD-R drive. The board has no BIOS so it cannot control a boot device, but it can con- trol any secondary SCSI device. 2. This board has been sold by SIIG as the i540 SpeedMaster. 3. This board has been sold by SIIG as the i542 SpeedMaster. Single Channel Products: ABP542 Bus-Master ISA with floppy (240 CDB) ABP842 Bus-Master VL (240 CDB) Dual Channel Products: ABP852 Dual Channel Bus-Master VL (240 CDB Per Channel) SEE ALSO
cd(4), ch(4), intro(4), isa(4), pci(4), scsi(4), sd(4), st(4) http://www.connectcom.net/ http://www.siig.com/ HISTORY
The adv device driver appeared in NetBSD 1.4. AUTHORS
Baldassare Dante Profeta <dante@mclink.it> BSD
June 4, 1999 BSD
All times are GMT -4. The time now is 02:21 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy