04-13-2006
Problem with SCSI DAT drive on Ultra 10
I will be honest I am quite new to UNIX and Solaris so this may be a simple thing.
I have just purchased a Sun (rebranded HP obviously) DAT DDS3 SCSI tape drive for my Sun Ultra 10 running Solaris 10.
I have previously fitted a SCSI card to the box which has configured ok and can be seen from both within solaris and openboot.
I can use the device from within Solaris but Openboot does not see it.
I am currently studying for the Solaris Administrator Certification I and I am wanting to try backing up the system then restoring it from scratch, but if the device is not seen in open boot I dont know how I will manage that.
I have tried a boot -r and I have checked the show-devs command but nothing is showing as connected to my scsi card, yet when I load up Solaris I can use the device with no problems
can anyone help please
P.S I am a newbe to UNIX so sorry if this is somthing simple.
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Ok guys I need all the help I can get right now. I have a Ultra 60 sun server and I can't get a ultra 3 scsi card to work in it . When I install the card the system will not boot correctly and I come up with errors that say:
pcipsy0: This is block
Can someone please help me. I trying to hook... (2 Replies)
Discussion started by: aojmoj
2 Replies
2. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
3. SCO
I am installing SCO UNIX 5.0.6 in X3400, every thing are install except Adaptec 29320ALP Card (Attached DAT Drive) because their driver are available in btld formate Fllopy DISk and SCO Unix 5.0.6 not support USB Floppy, Can anybody inform us any other method to installed the Adaptec Ultra 120... (3 Replies)
Discussion started by: hafizurr
3 Replies
4. SCO
I am facing a problem to install sco 5.0.6 in Dell Power Edge SC1420 which raid controller is ultra 320 scsi raid controller .
how/from where to download the ultra 320 scsi raid controller driver for sco 5.0.6.
Plz help with any idea
karzon (1 Reply)
Discussion started by: karzon
1 Replies
5. SCO
my server os version is openserver 5.0.6.from past few days it is giving problem while taking backup.it is giving error such that "TAPE WRITE ERROR".anyone can help to come out of this. (3 Replies)
Discussion started by: prakrithi
3 Replies
6. AIX
Hello, we are trying to install an HP DAT drive on an IBM AIX RS6000 server. We have attached the SCSI connection and power cylced the unit, but still cannot see the device in smit.
I am only a couple months into AIX, so I am very green! The server we are working on is in a lab environment,... (2 Replies)
Discussion started by: dayinthelife
2 Replies
7. SCO
hi all,
how i can configure a DAT drive usb under SCO os 6.0.0
thank you (0 Replies)
Discussion started by: lid-j-one
0 Replies
8. Solaris
Hi all,
I have solaris 10 sparc running and working very well
but i have problem with external SCSI tape drive DAT 72 problem
it seems to me the tape drive is manufactured by SUN microsystems
when i ran ls -l /dev/rmt/0
it reveals the following output
bash-3.00# mt -f /dev/rmt/0... (2 Replies)
Discussion started by: h@foorsa.biz
2 Replies
9. Solaris
Guys,
I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem.
I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80.
I connected it powered it up and at OK prompt did : boot -r
system comes up and complains about not... (6 Replies)
Discussion started by: ajnabi
6 Replies
10. Hardware
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Discussion started by: powwm
0 Replies
SIOP(4) BSD Kernel Interfaces Manual SIOP(4)
NAME
siop -- Symbios Logic/NCR 53c8xx SCSI driver
SYNOPSIS
hp700
siop* at mainbus? irq 3
siop* at phatomas? irq 3
PCI
siop* at pci? dev ? function ?
options SIOP_SYMLED
scsibus* at siop?
DESCRIPTION
The siop driver provides support for the Symbios Logic/NCR 53x8xx series of SCSI controller chips:
- 53c810, 53c810a and 53c815 (Fast SCSI)
- 53c820, 53c825 and 53c825a (Fast-Wide SCSI)
- 53c860 (Ultra SCSI)
- 53c875 and 53c875j (Ultra-Wide SCSI)
- 53c876 (Dual Ultra-Wide SCSI)
- 53c885 (Ultra-Wide SCSI and Ethernet)
- 53c895 (Ultra2-Wide SCSI)
- 53c896 (PCI 64bit, dual Ultra2-Wide SCSI)
- 53c1010-33 (PCI 64bit, dual Ultra160 SCSI)
- 53c1510d (PCI 64bit, dual Ultra2-wide SCSI)
The SIOP_SYMLED option causes the driver to report SCSI activity on the GPIO pin 1, which is connected to the activity LED on some adapters.
At this time only the 53c895 based Symbios and Tekram adapters are known to require this.
If both siop and the esiop(4) drivers are compiled, esiop(4) will take precedence for controllers it supports.
SEE ALSO
cd(4), ch(4), esiop(4), intro(4), pci(4), scsi(4), sd(4), st(4), uk(4)
HISTORY
The siop driver first appeared in NetBSD 1.5.
AUTHORS
The siop driver was written by Manuel Bouyer <Manuel.Bouyer@lip6.fr> for NetBSD.
BUGS
siop supports the 53c1010-33 in Ultra2-wide mode only. Use esiop(4) for Ultra160 support.
BSD
April 5, 2008 BSD