Sponsored Content
Full Discussion: Solaris 10 Jumpstart Problem
Operating Systems Solaris Solaris 10 Jumpstart Problem Post 302069745 by Jay_Fisi on Wednesday 29th of March 2006 02:26:38 AM
Old 03-29-2006
Solaris 10 Jumpstart Problem

Hi,

I build a jumpstart server with a running dhcp server. I already managed to install a x86 client via network. But my sparc clients aren't still working.
When booting via network I get the following message:

Timeout waiting for ARP/RARP packet

I ran "snoop" on the server:

client2 -> BROADCAST TFTP Read:"0A6606BB" (octet)
server -> client2 TFTP Error: access violation
client2 -> BROADCAST TFTP Read:"0A6606BB" (octet)
server -> client2 TFTP Error: access violation
client2 -> BROADCAST TFTP Read:"0A6606BB" (octet)
server -> client2 TFTP Error: access violation
client2 -> BROADCAST TFTP Read:"0A6606BB" (octet)
server -> client2 TFTP Error: access violation
....

I don't know about this tftp error, I got it during my x86 installation too, but the installation worked fine.
But I'm wondering why the client is sending a broadcast for so many times?? Seems like it's not getting an IP from the dhcp server`???

When I boot the client from it's own hdd, he's getting the IP from the dhcp server....

Hope you can help me, thank you very much in advance



Solved: did it without the dhcp server

Last edited by Jay_Fisi; 04-07-2006 at 08:19 AM..
 

9 More Discussions You Might Find Interesting

1. Solaris

Solaris 10 Jumpstart Problem

Hi Everyone, Thanks in advance for reading my thread. I am not very familiar with Unix so please bear with me if I say anything stupid. I have a SunFire V100 server with Solaris 8, which I made into a Boot/Install/Profile server. Recently, I re-install the V100 box with Solaris 10. The... (5 Replies)
Discussion started by: cityshrimp
5 Replies

2. UNIX for Advanced & Expert Users

solaris 9 using jumpstart to restore

Hello All, I use flar to install servers. I am not sure why it does not restore my hostname.bge0, hostname.bge1, ... from the same server with quad NIC card. Right now, I use a shell script to copy my networking information. Am I doing anything wrong or is flar behaving the way it is suppose... (1 Reply)
Discussion started by: afadaghi
1 Replies

3. Solaris

jumpstart Solaris 10 on Solaris 9 server

I just built a jumpstart server on a Solaris 9 sun box and have had no problems jumpstarting other sol9 boxes using the custom rules. I've also copied a Solaris 10 image onto that same solaris 9 server and have had problems loading Solaris 10. These boxes will go directly to the manual OS install... (5 Replies)
Discussion started by: salty
5 Replies

4. Solaris

Jumpstart solaris

Hi all , I am trying to jumpstart ( webstart) solaris 9 on E2900 ( client) using the DVD of a V440 server ( jumstart server). I did the setup for the V440 as follows : cleaning up preexisting install client "XXXXXXX" removing XXXXXXXfrom bootparams removing /etc/bootparams, since it is... (14 Replies)
Discussion started by: ppass
14 Replies

5. Solaris

Jumpstart Solaris 10 x86

I need a little help figuring out why my custom jumpstart network installation is dumping me to a manual install. I am trying to install Solaris 10 (unattended) over the wire from my jumpstart server to an HP Proliant DL380 server but I'm having difficulties with the unattended part. So, what... (2 Replies)
Discussion started by: alias.256
2 Replies

6. Solaris

Solaris 10 Jumpstart woes

Hi All I have a Solaris 10 jumpstart boot/config server set up on a subnet, and am trying to use it to build a client (the only other machine on the network). Things start out just fine, with the client booting into the Solaris Installation program, but then it just coredumps just as it's... (4 Replies)
Discussion started by: rickedwards44
4 Replies

7. Solaris

Jumpstart Solaris 10

Hello everyone, I tried to install solaris 10 using the command # boot net - install. I take the image correctly but when you start installing the Operating system installation takes a long (4 hours I have left and not advancing but not send me any errors), it can be seen from the following: ... (7 Replies)
Discussion started by: yflores
7 Replies

8. Solaris

Issue after jumpstart with Solaris 10 u7

I am performing this installation on a Sun T5220. There is an aftermarket Adaptec StorageTek raid controller card installed. I have created the raid array, and it is referred to as c1t0d0. Here is the profile I have created: install_type initial_install system_type server cluster SUNWCXall... (4 Replies)
Discussion started by: msarro
4 Replies

9. Solaris

Jumpstart Solaris 10

I have a laptop and need to build an Oracle Linux kickstart server and a Solaris Jumpstart server that can build sparc and x86 systems. Is the best way to create a dual boot from grub for Oracle Linux and Solaris x86? Can the Oracle Kickstart be used as a Jumpstart to build both Solaris 10... (2 Replies)
Discussion started by: Gian
2 Replies
in.tftpd(1M)                                                                                                                          in.tftpd(1M)

NAME
in.tftpd, tftpd - Internet Trivial File Transfer Protocol server SYNOPSIS
in.tftpd [-s] [homedir] tftpd is a server that supports the Internet Trivial File Transfer Protocol (TFTP). Before responding to a request, the server attempts to change its current directory to homedir; the default directory is /tftpboot. The use of tftp does not require an account or password on the remote system. Due to the lack of authentication information, in.tftpd will allow only publicly readable files to be accessed. Files may be written only if they already exist and are publicly writable. Note that this extends the concept of "public" to include all users on all hosts that can be reached through the network. This may not be appropriate on all systems, and its implications should be considered before enabling this service. in.tftpd runs with the user ID and group ID set to [GU]ID_NOBODY under the assumption that no files exist with that owner or group. How- ever, nothing checks this assumption or enforces this restriction. -d Debug. When specified it sets the SO_DEBUG socket option. -s Secure. When specified, the directory change to homedir must succeed. The daemon also changes its root directory to homedir. The in.tftpd server is IPv6-enabled. See ip6(7P). See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWtftp | +-----------------------------+-----------------------------+ svcs(1), tftp(1), inetadm(1M), inetd(1M), svcadm(1M), netconfig(4), attributes(5), smf(5), ip6(7P) Malkin, G. and Harkin, A. RFC 2347, TFTP Option Extension. The Internet Society. May 1998 Malkin, G. and Harkin, A. RFC 2348, TFTP Blocksize Option. The Internet Society. May 1998 Malkin, G. and Harkin, A. RFC 2349, TFTP Timeout Interval and Transfer Size Options. The Internet Society. May 1998 Sollins, K.R. RFC 1350, The TFTP Protocol (Revision 2). Network Working Group. July 1992. The tftpd server only acknowledges the transfer size option that is sent with a read request when the octet transfer mode is specified. The in.tftpd.1m service is managed by the service management facility, smf(5), under the service identifier: svc:/network/tftp/udp6:default Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). Responsibil- ity for initiating and restarting this service is delegated to inetd(1M). Use inetadm(1M) to make configuration changes and to view config- uration information for this service. The service's status can be queried using the svcs(1) command. Unlike most smf(5) services, a manifest for the tftp service is not included in the system. To create one and enable this service, the administrator should: 1. Edit /etc/inet/inetd.conf and uncomment the tftp entry. 2. Run /usr/sbin/inetconv. After you run inetconv, the svc:/network/tftp/udp6:default service is created and enabled. 8 Mar 2005 in.tftpd(1M)
All times are GMT -4. The time now is 10:52 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy