AHA152X_CS(4)						     Kernel Interfaces Manual						     AHA152X_CS(4)

NAME

       aha152x_cs - Adaptec AHA-152X compatible PCMCIA device driver

SYNOPSIS

       insmod aha152x_cs.o [pc_debug=n] [irq_list=i,j,...]  [host_id=n] [reconnect=n] [parity=n] [synchronous=n] [reset_delay=n] [ext_trans=n]

DESCRIPTION

       aha152x_cs  is  the  low-level  Card  Services  driver  for various PCMCIA SCSI adapters that are compatible with the Adaptec AHA-152X host
       adapter.  These include the New Media Bus Toaster, the Adaptec AHA-1460, and various other OEM cards.

PARAMETERS

       pc_debug=n
	      Selects the PCMCIA debugging level.  This parameter is only available if the module is compiled with debugging enabled.  A  non-zero
	      value enables debugging.

       irq_list=i,j,...
	      Specifies the set of interrupts that may be allocated by this driver.

       host_id=n
	      Specifies the SCSI ID of the host adapter.  The default host ID is 7.

       reconnect=n
	      Enables support for disconnect/reconnect, if non-zero.  The default is 1 (true).

       parity=n
	      Enables SCSI parity checking.  The default is 1 (true).

       synchronous=n
	      Enables negotiation of synchronous SCSI transfers.  The default is 0 (false).

       reset_delay=n
	      Specifies a delay for SCSI bus resets, in 10 millisecond intervals.  The default is 100.

       ext_trans=n
	      Enables the ``extended translation'' scheme for partition tables of drives larger than 1 GB.

AUTHOR

       David Hinds - dahinds@users.sourceforge.net

SEE ALSO

       cardmgr(8), pcmcia(5).

pcmcia-cs							2000/06/12 21:24:47						     AHA152X_CS(4)