kc2img(1)						      General Commands Manual							 kc2img(1)

NAME

       kc2img - convert KC files to raw KC tape images

SYNOPSIS

       kc2img <infile> <outfile>

DESCRIPTION

       kc2img  converts the following file types to raw KC tape images. Those files contain the data bytes as written by the KC tape routines with
       block number and checksum removed. So each block is saved as 128 bytes.

       Machine code files start with an 128 byte header (one block) that contains filename, load start address, load end address and optionally  a
       start address whose presence is flagged by a status byte. Basic files only have a 13 byte header with filename and filesize.

       1) files used by the KC emulator by Arne Fitzenreiter (usually named .TAP)

       2) files used by the GEMINI-SOFT KC emulator (usually named .GPF for machine code files and .GBF for basic files)

       3) BASIC files (usually named .SSS)

       4) KC image files that contain the data written by the KC tape routines without block number and checksum (usually named .KCC or .KCB where
       the .KCB files are BASIC files with an autostart routine)

BUGS

       Basic files are not handled properly.

SEE ALSO

       kcemu(1x), kctape(1), kc2tap(1), kc2wav(1), kc2raw(1)

AUTHOR

       This manual page was written by Torsten Paul <Torsten.Paul@gmx.de>, for the Debian GNU/Linux system (but may be used by others).

																	 kc2img(1)