Sponsored Content
Full Discussion: wireless connection
Special Forums IP Networking wireless connection Post 24013 by caveman_piet on Wednesday 3rd of July 2002 07:18:33 PM
Old 07-03-2002
Network wireless connection

Hi
Having a problem getting the Orinoco silver
to work on Redhat 7.3. (new full install)
On install it worked - sometimes - but I had to manually set the default gateway to the wireless instead of the 10/100 ethernet card.
Most often I had to restart pcmcia to get it going properly.
Now its all broken. (I'm not sure why!)

The thing starts with the "beep-beep" to say the card is active etc. - the network,mask, etc. is all set - but it somehow doesn't see the gateway.
"network unreachable!!" when I ping.
I can activate/deactivate both network cards without problems -- and checked that the "pcmcia restart" uses and loads the correct modules.
The 10/100 on eth0 installs without any hassles.

Installing it on M$w2k it works....

I've gone thru all the setup files, as when I installed it for 7.1. (where I recompiled the kernel to get it to work). All seems fine.
I think there is something small I'm missing.. Any ideas?? Is there a trace or some such I can try to see what is cooking? Using "rc3" I can see activity on it. Don't really know what the red/green traces are telling me though Smilie
Any other programs I can use to monitor this??
Like some sort of sniffer??

Tx in advance
 

10 More Discussions You Might Find Interesting

1. IP Networking

Wireless-G network

Hi, I have a laptop with a Linksys Wireless G PCMCIA card and a cable connection goin into a router and then a patch lead from the router going to a Linksys Wireless G access point IP 192.168.1.245 with DHCP disabled. I can connect to the access point from the laptop, but how do I get the... (1 Reply)
Discussion started by: perleo
1 Replies

2. HP-UX

Wireless

Can someone please point me in the correct direction for setting up a wireless card using HP-UX 11iV1? I know its different depending on the type of card I have, but im looking for a direction. Thanks! (0 Replies)
Discussion started by: nickwinnie
0 Replies

3. UNIX for Dummies Questions & Answers

ssh_exchange_identification: Connection closed by remote host Connection closed

Hi Everyone, Good day. Scenario: 2 unix servers -- A (SunOS) and B (AIX) I have an ftp script to sftp 30 files from A to B which happen almost instantaneously i.e 30 sftp's happen at the same time. Some of these sftp's fail with the following error: ssh_exchange_identification: Connection... (1 Reply)
Discussion started by: jeevan_fimare
1 Replies

4. UNIX for Advanced & Expert Users

Connection reset by peer..closing connection

Hello I'm facing the above problem while doing a performance run. I've a script which I'm launching from my windows desktop using mozilla. The script will invoke backend action on a Solaris host which in turn feeds the records to a driver located on a linux box(Cent OS). What's happening is... (1 Reply)
Discussion started by: subramanyab
1 Replies

5. Solaris

Solaris 10 ftp connection problem (connection refused, connection timed out)

Hi everyone, I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Discussion started by: labdakos
4 Replies

6. UNIX for Advanced & Expert Users

wireless connection with fluxbox via commands

Hi, By default I use all gnome stuff (gdm+metacity+...) and my connection works well. I wanted to try fluxbox. So I've just changed my window manger. And under fluxbox, wireless isn't managed automatically like with gnome. So I tried to set it up manually ... but I can't make my wireless... (0 Replies)
Discussion started by: xib.be
0 Replies

7. Emergency UNIX and Linux Support

Don't have wireless connection any more ..

Hello, Please help me because I'm stuck. I am using Fedora 16 on my notebook Fujitsu A6025. It was working fine for days and then suddenly I lost wireless connection , I can't enable 'ON' option in Network configuration (it looks like disabled) and I don't see any wireless network around me (... (10 Replies)
Discussion started by: susja
10 Replies

8. Linux

wireless connection problem

Hi everyone, I am new to linux. I have installed ubuntu and I am booting together with window. But I have a problem of wireless connection in ubuntu. If I start booting using ubuntu no wireless networks become available. If I first open window and restart it and open ubuntu then only I can get... (2 Replies)
Discussion started by: nishrestha
2 Replies

9. UNIX for Advanced & Expert Users

How keep running a program n an another computer via a connection ssh when the connection is closed?

Hi everybody, I am running a program on a supercomputer via my personal computer through a ssh connection. My program take more than a day to run, so when I left work with my PC I stop the connection with the supercomputer and the program stop. I am wondering if someone know how I can manage... (2 Replies)
Discussion started by: TomTomGre
2 Replies

10. Hardware

Wireless connection to printer

I need to connect old PPC G5 running OSX 10.5.8 to Epson Stylus 1400 printer, wiring is very difficult, so I need to find out what are my wireless options. Printer has only USB input. The printing includes graphics and text from Adobe as well as a special graphics application, which is the reason... (6 Replies)
Discussion started by: migurus
6 Replies
WIRELESS(7)						     Linux Programmer's Manual						       WIRELESS(7)

NAME
wireless - Wireless Tools and Wireless Extensions SYNOPSIS
iwconfig iwpriv -a DESCRIPTION
The Wireless Extensions is an API allowing you manipulate Wireless LAN networking interfaces. It is composed of a variety of tools and configuration files. It is documented in more detail in the Linux Wireless LAN Howto. The Wireless Tools are used to change the configuration of wireless LAN networking interfaces on the fly, to get their current configura- tion, to get statistics and diagnose them. They are described in their own man page, see below for references. Wireless configuration is specific to each Linux distribution. This man page will contain in the future the configuration procedure for a few common distributions. For the time being, check the file DISTRIBUTIONS.txt included with the Wireless Tools package. DEBIAN 3.0 In Debian 3.0 (and later) you can configure wireless LAN networking devices using the network configuration tool ifupdown(8). File : /etc/network/interfaces Form : wireless-<function> <value> wireless-essid Home wireless-mode Ad-Hoc See also : /etc/network/if-pre-up.d/wireless-tools /usr/share/doc/wireless-tools/README.Debian SuSE 8.0 SuSE 8.0 (and later) has integrated wireless configuration in their network scripts. Tool : Yast2 File : /etc/sysconfig/network/wireless /etc/sysconfig/network/ifcfg-* Form : WIRELESS_<function>=<value> WIRELESS_ESSID="Home" WIRELESS_MODE=Ad-Hoc See also : man ifup info scpm ORIGINAL PCMCIA SCRIPTS
If you are using the original configuration scripts from the Pcmcia package, you can use this method. File : /etc/pcmcia/wireless.opts Form : *,*,*,*) ESSID="Home" MODE="Ad-Hoc" ;; See also : /etc/pcmcia/wireless File PCMCIA.txt part of Wireless Tools package AUTHOR
Jean Tourrilhes - jt@hpl.hp.com http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ SEE ALSO
iwconfig(8), iwlist(8), iwspy(8), iwpriv(8), iwevent(8). wireless-tools 4 March 2004 WIRELESS(7)
All times are GMT -4. The time now is 11:38 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy