07-01-2002
Whoa! I don't believe that I woulda tried that. Well I am not really a Sun guy and I have never used Solaris 7. Still I will make a few wild guesses. Remember though, no money back guarantee or anything...
My guess is that the OS can't get far enough into the boot processes to run the scripts that a reconfig boot would invoke. So you have a chicken and egg problem. I can think of two things that might be worth a try. I don't understand either of them well and in fact I would need to flip a coin to pick which to try first.
First, /etc/system has some comments in it talking about setting the parameter rootdev to override the root device. Take a look at your /etc/system and look at the commented example of setting the root device. You might try that.
Next, if you can get into single user mode, you might try running the stuff that a reconfigure reboot would run. The things that look appropriate are:
drvconfig
devlinks
disks
Well good luck, dude, you're gonna need it. If you get that thing up to multi-user mode, let us know what did the trick.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Can anyone out there help me out? I'm trying to install a scsi tape back up on a sys running sco openserver 5.0.4. When I go through the steps for mkdev tape it seems like it works, but when I reboot I still don't see the tape. Also when it boots up I get a scsi bios not installed error. I've... (1 Reply)
Discussion started by: goatboy_tx
1 Replies
2. UNIX for Dummies Questions & Answers
Hello agian !
What is the difference between SCSI and IDE hard disks ?
I have Intel PC and when i check i have Generic IDE TYPE DISK0
is IDE hard disk is ok for Solrais ? or should i buy the SCSI hard disk ?
Thanks
Abid Malik (3 Replies)
Discussion started by: abidmalik
3 Replies
3. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
4. UNIX for Dummies Questions & Answers
Someone gave me a small external SCSI hard drive for my SunOS 5.8 test system. How do I make Unix see the hard drive? (2 Replies)
Discussion started by: FredSmith
2 Replies
5. Solaris
Guys,
I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem.
I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80.
I connected it powered it up and at OK prompt did : boot -r
system comes up and complains about not... (6 Replies)
Discussion started by: ajnabi
6 Replies
6. SCO
i was installing i my computer windows xp and sco
when i use knoppix5.0 live to read scsi partition wish sco was installing
show me message that i have not permission to acces in scsi hard drive
help me please (1 Reply)
Discussion started by: walidfinder
1 Replies
7. Linux
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Discussion started by: shen747
23 Replies
8. Solaris
Hi All
I am having VxVm on two Solaris hosts. host1 is using disk group dgHR. right now this server went down due to hardware fault. Not I need to import this dgHR into host2 server. Please let me know the procedure for the same. (1 Reply)
Discussion started by: amity
1 Replies
9. SCO
OK group, it's been 12 years since I worked with SCO. I need some direction here:
SCO Openserver 5.07
I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for... (1 Reply)
Discussion started by: jscholz
1 Replies
10. Solaris
Hi,
I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error:
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies
reboot(1M) reboot(1M)
NAME
reboot - restart the operating system
SYNOPSIS
/usr/sbin/reboot [-dlnq] [boot_arguments]
The reboot utility restarts the kernel. The kernel is loaded into memory by the PROM monitor, which transfers control to the loaded kernel.
Although reboot can be run by the super-user at any time, shutdown(1M) is normally used first to warn all users logged in of the impending
loss of service. See shutdown(1M) for details.
The reboot utility performs a sync(1M) operation on the disks, and then a multi-user reboot is initiated. See init(1M) for details. On
systems, reboot may also update the boot archive as needed to ensure a successful reboot.
The reboot utility normally logs the reboot to the system log daemon, syslogd(1M), and places a shutdown record in the login accounting
file /var/adm/wtmpx. These actions are inhibited if the -n or -q options are present.
Normally, the system reboots itself at power-up or after crashes.
The following options are supported:
-d Force a system crash dump before rebooting. See dumpadm(1M) for information on configuring system crash dumps.
-l Suppress sending a message to the system log daemon, syslogd(1M) about who executed reboot.
-n Avoid calling sync(2) and do not log the reboot to syslogd(1M) or to /var/adm/wtmpx. The kernel still attempts to sync
filesystems prior to reboot, except if the -d option is also present. If -d is used with -n, the kernel does not attempt to
sync filesystems.
-q Quick. Reboot quickly and ungracefully, without shutting down running processes first.
The following operands are supported:
boot_arguments An optional boot_arguments specifies arguments to the uadmin(2) function that are passed to the boot program and kernel
upon restart. The form and list of arguments is described in the boot(1M) and kernel(1M) man pages.. If the arguments are
specified, whitespace between them is replaced by single spaces unless the whitespace is quoted for the shell. If the
boot_arguments begin with a hyphen, they must be preceded by the -- delimiter (two hyphens) to denote the end of the reboot
argument list.
Example 1: Passing the -r and -v Arguments to boot
In the following example, the delimiter -- (two hyphens) must be used to separate the options of reboot from the arguments of boot(1M).
example# reboot -dl -- -rv
Example 2: Rebooting Using a Specific Disk and Kernel
The following example reboots using a specific disk and kernel.
example# reboot disk1 kernel.test/unix
/var/adm/wtmpx login accounting file
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
mdb(1), boot(1M), dumpadm(1M), fsck(1M), halt(1M), init(1M), kernel(1M), shutdown(1M), sync(1M), syslogd(1M), sync(2), uadmin(2),
reboot(3C), attributes(5)
The reboot utility does not execute the scripts in /etc/rcnum.d or execute shutdown actions in inittab(4). To ensure a complete shutdown
of system services, use shutdown(1M) or init(1M) to reboot a Solaris system.
11 Apr 2005 reboot(1M)