Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: unix challenged error ?
Top Forums UNIX for Dummies Questions & Answers unix challenged error ? Post 21579 by killerserv on Sunday 19th of May 2002 08:15:11 PM
Old 05-19-2002
One thing that you didn't indicate in your post, Your hdd specs, and the adapters, do you have 2 SCSI hdd ? is yes, are they using the same interrupt, according to the motherboard bios?
One possible solution, is to remove the second controller and combine all your scsi devices onto one controller. The error messages indicate that the second controller and the second hard disk on that controller is giving you problems. Check to see what directories are being stored on the second drive, on the second controller. One of the most overlooked problem areas of SCSI, is the terminators...Do post back.
 

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

SCO UNIX error 6, HELP

I have a system here running "SCO UNIX System V/386, Release 3.2" I'm not sure if someone has changed anything, but all of the sudden I get constant scrolling errors... "*** /etc/getty ttyr006 m (CURRENT TIME/DATE): Cannot open line ttyr006: No such device or address (error 6)" this... (0 Replies)
Discussion started by: PBNOSGT
0 Replies

2. Shell Programming and Scripting

Error in unix

I am using tuxedo for our application.when i tried to compile my application, i get "PCC-F - NOERRFile , unable to open error message file, Facility PR2" error message.. Please let me know how to resolve it (0 Replies)
Discussion started by: Jayashree
0 Replies

3. Shell Programming and Scripting

...yet another string of awk/sed questions from a RegExp-Challenged luser %-\

Greetings all, ...here is yet another string of awk/sed questions from a RegExp-Challenged luser :eek: I'm looking to have sed/awk do some clean-up on routing tables and to that end, I would like to do the following: 1.) If a line contains the word "masks" or "subnets" prepend CR/LF to... (16 Replies)
Discussion started by: SteveB-in-LV
16 Replies

4. Shell Programming and Scripting

Makefile error in UNIX

Hi, I had created makefile to compile and create .exe file. but while executing makefile i am receiving following error I can create obj and lib files but not able to create executeable file due to following error. 0711-317 Error: undefined symbol: .fn_error(......) 0711-345 use the... (2 Replies)
Discussion started by: Poonamol
2 Replies

5. UNIX for Dummies Questions & Answers

1 SSH tunnel, 2 devices: 1 "just works," other gets challenged

summary: I have 2 devices on same LAN which tunnel through one gateway to a cluster, using ssh with public keys for password/passphrase-less login. I configured both devices, and those ssh configurations are nearly identical with regard to ssh. From either device I can shell into the cluster.... (2 Replies)
Discussion started by: TomRoche
2 Replies

6. UNIX for Dummies Questions & Answers

Error UNIX: UNIX SCO release 5.05 system does not boot

UNIX sco release 5.05 system does not boot:cannot open device hd(40)/boot stage 1 boot failure: error loading hd(40)/bootWhat to do? (2 Replies)
Discussion started by: Joaoalpande
2 Replies

7. Shell Programming and Scripting

SFTP error in UNIX

I have this code snippet: sftp $USERNAME@$REMOTE_SERVER -omode=ascii >> $LOG_FILEPATH/$LOG_FILENAME 2>&1 ls /+showall ls /+... (11 Replies)
Discussion started by: Jesshelle David
11 Replies

8. UNIX for Beginners Questions & Answers

Print Error in Console and both Error & Output in Log file - UNIX

I am writing a shell script with 2 run time arguments. During the execution if i got any error, then it needs to redirected to a error file and in console. Also both error and output to be redirected to a log file. But i am facing the below error. #! /bin/sh errExit () { errMsg=`cat... (1 Reply)
Discussion started by: sarathy_a35
1 Replies

LEARN ABOUT SUNOS

chs

chs(7D) 							      Devices								   chs(7D)

NAME

       chs - IBM ServeRAID PCI host adapter driver

DESCRIPTION

       The chs driver is the IBM ServeRAID PCI controller driver.

PRECONFIGURATION

   Known Problems and Limitations
       To  prevent  data  loss,  a  SCSI disk drive that is not defined as part of any physical pack within a logical drive will not be accessible
       through the Solaris operating environment.

CONFIGURATION

       Auto-configuration code determines whether the adapter is present at the configured address and what types of devices are attached  to  it.
       The IBM ServeRAID is primarily used as a disk array (system drive) controller.

       To  configure the attached disk arrays, you must configure the controller (using the configuration utilities provided by the hardware manu-
       facturer) before booting the Solaris operating environment You use the configuration utilities to set RAID levels, stripe parameters, cache
       mechanisms and perform other functions. For more information, see the user manual supplied with your hardware.

FILES

       /kernel/drv/chs.conf	       chs configuration file

       /dev/dsk/cndn[s|p]n	       block device

       /dev/rdsk/cndn[s|p]n	       raw device where:

       cn			       controller n

       dn			       LUN n (0-7)

       sn			       UNIX system slice n (0-15)

       pn			       fdisk(1M) partition(0)

ATTRIBUTES

       See attributes(5) for a description of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       |Architecture		     |x86			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       fdisk(1M), attributes(5), cmdk(7D)

SunOS 5.10							 27 November 2000							   chs(7D)
All times are GMT -4. The time now is 05:10 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy