04-30-2002
CD rom and SCO
Have you tried to do a
mkdev cdrom
or even using scoadmin
then goto Hardware/ Kernel Tuner
then select cdrom/WORM
You will be asked about whether to install an IDE or SCSI
Select IDE
Then it will ask which ide bus ( primary or secondary)
Then whether it is a master or slave
Select the appropriate one and it may ask you if you need to install a Sirrea file system / Rock ridge / ISO 9660
Just selct yes and it will now reling the kernal and reboot.
Make sure you know which ide port you have selected
And hopefully it will come up.
9 More Discussions You Might Find Interesting
1. Programming
Hi folks
I'm looking for a easy-to-use C/C++ IDE to develop application for X-windows on FreeBSD (window manager is OpenBox, and I don't have KDE/Gnome installed)!
Is there a good programming IDE for this?? (1 Reply)
Discussion started by: tos
1 Replies
2. SCO
My boss get a Proliant ML 330 G3 server with IDE ARRAY Bus, I try to isntall UNIX 5.0.7 on it but i't didn't detect as a hdd, I try to configure it as single logical drive and many combinations but UNIX always says taht there is no hdd, does anyone knows how to?? the boss of course won't say it... (0 Replies)
Discussion started by: jactroo
0 Replies
3. HP-UX
Can netbeans IDE be installed and used on hp-ux?
Sorry I know this is more java specific but does anybody have any experience with this? There does not seem to be any specific installation or support from netbeans. (0 Replies)
Discussion started by: domestos
0 Replies
4. Filesystems, Disks and Memory
Wellcomes All,
some times ago I 've installed a Debian ditribution on an Hard Disk who was set as Primary Master. Few days ago, I 've decided to install another Hard Disk with a different Operating System. When I did that, I turned off the old hard disk, and I mouted the new one on the Primary IDE... (1 Reply)
Discussion started by: thekarsillo
1 Replies
5. Linux
I know we are supposed to be using UNIX as a collection of tools but are there any big applications where I can run/test C programs without exposing the poor things to the outside world? :D (3 Replies)
Discussion started by: treedroppings
3 Replies
6. Programming
Hi,
I'm using command line for
editing(vi),
building(make),
debugging(gdb)
applications written in C++ .
To which IDE it is easyest/fastest to move such command-line project.
Seems that SlickEdit requires to do mass of settings to create its own project. (6 Replies)
Discussion started by: mitan_shahverdy
6 Replies
7. Solaris
Got two v240s I'm trying to install the latest version of Solaris 10 on. Neither will boot from a burned install DVD by simply dropping in a DVD and restarting. I got to the OK prompt and tried a boot -s cdrom but it just tried to boot off of one of the scsi drives. Did a reset-all and a... (5 Replies)
Discussion started by: LittleLebowski
5 Replies
8. SCO
Installing SCO UNIX 507 on Dell Poweredge T610. It has no floppy so I downloaded the BTLD onto CD from SCO site to load without floppy drive. BTLD loads ok. when i get to the Media to be used, no matter what option i chose i get the error: No controller for device you have chosen. During bootup you... (9 Replies)
Discussion started by: romanglad112
9 Replies
9. UNIX for Dummies Questions & Answers
Hello, I've got an Ultrix 4.2 ISO file (gxemul doesn't recognize it when I type gxemul -X -e 3max -d rootdisk.img -d Ultrix4_2.iso)
So I read some other posts which show that this can be done via a UFS CDROM image. But I don't know how to create one. Anyway, I think the ISO file could be in... (0 Replies)
Discussion started by: lucky7456969
0 Replies
HD(4) Linux Programmer's Manual HD(4)
NAME
hd - MFM/IDE hard disk devices
DESCRIPTION
The hd* devices are block devices to access MFM/IDE hard disk drives in raw mode. The master drive on the primary IDE controller (major
device number 3) is hda; the slave drive is hdb. The master drive of the second controller (major device number 22) is hdc and the slave
hdd.
General IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the
partition on that physical drive. The first form, hdX, is used to address the whole drive. Partition numbers are assigned in the order
the partitions are discovered, and only nonempty, nonextended partitions get a number. However, partition numbers 1-4 are given to the
four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended. Thus, the first logi-
cal partition will be hdX5. Both DOS-type partitioning and BSD-disklabel partitioning are supported. You can have at most 63 partitions
on an IDE disk.
For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on the
second one.
They are typically created by:
mknod -m 660 /dev/hda b 3 0
mknod -m 660 /dev/hda1 b 3 1
mknod -m 660 /dev/hda2 b 3 2
...
mknod -m 660 /dev/hda8 b 3 8
mknod -m 660 /dev/hdb b 3 64
mknod -m 660 /dev/hdb1 b 3 65
mknod -m 660 /dev/hdb2 b 3 66
...
mknod -m 660 /dev/hdb8 b 3 72
chown root:disk /dev/hd*
FILES
/dev/hd*
SEE ALSO
chown(1), mknod(1), sd(4), mount(8)
COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 1992-12-17 HD(4)