HP-UX - how to create virtual interface Post: 17248

10 More Discussions You Might Find Interesting

1. HP-UX

Adding virtual Interface on HP UX

Hello all, I want to add a new virtual interface on HP-UX B.11.11 U 9000/800 box. I know that ifconfig can be used to add the Virtual interface. BUt i do not know the exact syntax. it some times gives plumb error if i try to add # ifconfig vif0 10.1.10.1 up plumb error: No such file...

2. HP-UX

Traceroute on virtual interface

Hello all, I have configured a virtual interface using ifconfig on HP UX 11.11. When i try to do traceroute with -i option i get * * * from traceroute. i use $traceroute -i lan0:1 my-gateway traceroute to my-gateway (15.70.180.1), 30 hops max, 40 byte packets 1 * * * 2 * * * 30 * *...

3. IP Networking

Solaris Virtual Interface Problem in DHCP

Hi all, I am experiencing a problem with dhcp broadcast packages. these broadcast packages are seen on bge1 and bge1:1 interfaces but somehow they are not seen at bge771001 interface which is second virtual interface on the bge1 interface. I have a server on which I configured it as working...

4. Shell Programming and Scripting

virtual interface

How would i create virtual interface in linux to configure more than one IP address for a physical interface? any help wll be appreciated. https://www.unix.com/images/misc/progress.gif

5. IP Networking

assign mac address for virtual interface eth1:0

Hi , by default the physical interface (eth1) and virtual interface eth1:0 will be having same mac address, is there any way we can assign separate mac addresses for both the interfaces. would some one help me out in this. Thanks Gopi

6. AIX

Virtual interface on AIX

Hi, I am totally new to AIX. I would like to know how to create virtual interface on AIX machine. Thanks, Pooja

7. UNIX for Dummies Questions & Answers

Creating a virtual Interface to recieve snmp traps

All, I have a question regarding setting up a virtual interface to recieve snmp traps from network devices. My Solaris 10 server is running the HPOV-NNMi application. The network devices in our environment (many thousands) are all pre-configured to send their snmp traps to a specific IP...

8. IP Networking

Splitting eth0 traffic into two virtual interface

Hello everybody, I have been reading many posts about this topic but I have no figure out how to solve it. I need to split the traffic incoming on eth0 on two other interfaces (for instance one receiving on port 80 and the others on the other interface). I cannot understand how to do that....

9. IP Networking

How to route all incoming packets from one virtual interface?

Hello, I'm trying to route all packets arriving at a particular interface by entering the same interface the virtual interface eth1: 2 and now everything is routed by default gw configured on eth1. eth1 Link encap:Ethernet HWaddr 0a:0e:64:18:52:72 inet addr:192.168.10.15 eth1:2 ...

10. AIX

LPAR missing virtual interface

Note: Newbie to IBM virtualization :-) Query: Created a new AIX7.1 lpar on a system with same config as one before however the new one is having issues going out to physical network. Now on comparison the only thing which differs between these two machines is an additional en1 and ent1 shown...

LEARN ABOUT MOJAVE

net::ldap::control::vlvresponse

Net::LDAP::Control::VLVResponse(3)			User Contributed Perl Documentation			Net::LDAP::Control::VLVResponse(3)

NAME

       Net::LDAP::Control::VLVResponse -- LDAPv3 Virtual List View server response

SYNOPSIS

       See Net::LDAP::Control::VLV

DESCRIPTION

       "Net::LDAP::Control::VLVResponse" is a sub-class of Net::LDAP::Control.	It provides a class for manipulating the LDAP Virtual List View
       Response control ""

       If the server supports Virtual List Views, then the response from a search operation will include a VLVResponse control.

CONSTRUCTOR ARGUMENTS

       In addition to the constructor arguments described in Net::LDAP::Control the following are provided.

       content
	   An estimate of the number of entries in the complete list. This value should be used in any subsequent Virtual List View control using
	   the same list.

       context
	   An arbitrary value which is used to associate subsequent requests with the request which this control is a response for. This value
	   should be copied by the client into the Virtual List View control for any subsequent search that uses the same list.

       result
	   A result code indicating the result of the Virtual List View request. This may be any of the codes listed below.

       target
	   The list offset of the target entry.

METHODS

       As with Net::LDAP::Control each constructor argument described above is also available as a method on the object which will return the
       current value for the attribute if called without an argument, and set a new value for the attribute if called with an argument.

RESULT CODES

       Possible results from a sort request are listed below. See Net::LDAP::Constant for a definition of each.

       LDAP_SUCCESS
       LDAP_OPERATIONS_ERROR
       LDAP_TIMELIMIT_EXCEEDED
       LDAP_ADMIN_LIMIT_EXCEEDED
       LDAP_INSUFFICIENT_ACCESS
       LDAP_BUSY
       LDAP_UNWILLING_TO_PERFORM
       LDAP_OTHER
       LDAP_SORT_CONTROL_MISSING
       LDAP_INDEX_RANGE_ERROR

SEE ALSO

       Net::LDAP, Net::LDAP::Control

AUTHOR

       Graham Barr <gbarr@pobox.com>

       Please report any bugs, or post any suggestions, to the perl-ldap mailing list <perl-ldap@perl.org>

COPYRIGHT

       Copyright (c) 2000-2004 Graham Barr. All rights reserved. This program is free software; you can redistribute it and/or modify it under the
       same terms as Perl itself.

perl v5.18.2							    2013-07-21					Net::LDAP::Control::VLVResponse(3)