Sponsored Content
Full Discussion: basic networking
Special Forums IP Networking basic networking Post 17032 by comadreja on Sunday 10th of March 2002 02:33:37 PM
Old 03-10-2002
you must use the same rank of ips for the two pcs.
if you have 192.168.0.1 in you windows box you can assing 192.168.0.2 to you linux box. you can play with the ip number depende of you mask.
if you havea mask 255.255.255.0, you only can use 255 ips for your network, this is a class C network.
e.g.
ip: 192.168.0.1
network: 192.168.0.0
mask: 255.255.0.0
brodcast: 192.168.255.255
this will be a class B network

the hostname is the name of you box, you can use you name like bob, but you can't repeat names in other pc.
gateway is the box or router that connects you lan with internet or other network.
dns is the service that translates name address to ip address. if you need you can set up a dsn server on your linux box, or simple use the dns server of your isp.
if you are using one silgle utp cable to connect the pcs, you must use the code A in one rj, and the code B in the other.

 

8 More Discussions You Might Find Interesting

1. Slackware

Basic networking questions.

Hey, I'm new to Linux. I have a few questions about it. I run Slackware. After the installation the Linux installation had problems with my old hardware (network card, sound card) so I removed them and Linux would start. But now, I can't seem to use the network card in Linux because it's not... (3 Replies)
Discussion started by: RellioN
3 Replies

2. UNIX for Dummies Questions & Answers

Basic networking setup in unix

I have a SunOS 5.8 box and have always downloaded & applied patches via my PC, but I want to be able to go out to sunsolve directly from the console ... however, I guess it doesn't know the IP of our domain's DNS server or something. Where are these setting held on a Sun box??? (1 Reply)
Discussion started by: FredSmith
1 Replies

3. UNIX for Advanced & Expert Users

how ..........networking

hi everyone this is dipendra, i am interested in networking,i know simple socket programming . and now i am wonder to get in to audio socket. i have no clue how to build audio socket.so i am looking if u can provide me a link regarding the audio socket building tutorials. (1 Reply)
Discussion started by: dipendra_regmi
1 Replies

4. IP Networking

C networking

Can anybody help me regarding networking using c language i know how to capture the packets and to verify it`s protocol destination and source ip etc. Can anybody help me to direct a packet coming to an ip to some other ip of my choice ........ Hope reply ... (0 Replies)
Discussion started by: Sannair
0 Replies

5. IP Networking

Networking

Hi, I have a question on networking. I will try to ask with an example... Suppose i am googling something, as in searching something in the google page. In this case what I basically want to know is, does the client do a connect evrytime to the server whenever a search is done in google,... (1 Reply)
Discussion started by: naan
1 Replies

6. IP Networking

Basic networking please help

I am running Ubuntu Desktop and Ubuntu Server editions on two separate VMs. For the desktop I have set network adapters: Adapter 1: internal network called intnet Adapter 2: NAT Server: Adapter 1: internal network called intnet Now I'm suppose to set ip addresses which I'm pretty sure... (5 Replies)
Discussion started by: shadowcat
5 Replies

7. IP Networking

Basic networking question

Hii, Today morning I attended an interview, they had showed me the attached image and had few questions about that. The image shows a network with 4 nodes viz.. A B C & D and two switches(layer2) and a router(layer3). Just wanted to know can node A and node D would be on same network e.g... (4 Replies)
Discussion started by: zing_foru
4 Replies

8. IP Networking

Networking

hi From mt windows machine I can ping a LINUX machine but there is no arp entry for the same LINUX on my windows. How is it possible and what can I do to add the arp entry as I need it. thanks (1 Reply)
Discussion started by: leghorn
1 Replies
netmasks(4)                                                        File Formats                                                        netmasks(4)

NAME
netmasks - network mask database SYNOPSIS
/etc/inet/netmasks /etc/netmasks DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part). For example, 128.32.0.0 255.255.255.0 can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition to the standard sixteen bits in the network field. When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net- masks file. For example, 128.32.0.0 255.255.255.0 128.32.27.0 255.255.255.240 128.32.27.16 255.255.255.240 128.32.27.32 255.255.255.240 128.32.27.48 255.255.255.240 128.32.27.64 255.255.255.240 128.32.27.80 255.255.255.240 128.32.27.96 255.255.255.240 128.32.27.112 255.255.255.240 128.32.27.128 255.255.255.240 128.32.27.144 255.255.255.240 128.32.27.160 255.255.255.240 128.32.27.176 255.255.255.240 128.32.27.192 255.255.255.240 128.32.27.208 255.255.255.240 128.32.27.224 255.255.255.240 128.32.27.240 255.255.255.240 128.32.64.0 255.255.255.192 can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through 128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field. Invalid entries are ignored. SEE ALSO
ifconfig(1M), inet(7P) Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park, Calif., August 1985. V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519, Network Information Center, SRI International, Menlo Park, Calif., September 1993. T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif., December 1995. NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility. SunOS 5.10 7 Jan 1997 netmasks(4)
All times are GMT -4. The time now is 06:19 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy