03-10-2002
you must use the same rank of ips for the two pcs.
if you have 192.168.0.1 in you windows box you can assing 192.168.0.2 to you linux box. you can play with the ip number depende of you mask.
if you havea mask 255.255.255.0, you only can use 255 ips for your network, this is a class C network.
e.g.
ip: 192.168.0.1
network: 192.168.0.0
mask: 255.255.0.0
brodcast: 192.168.255.255
this will be a class B network
the hostname is the name of you box, you can use you name like bob, but you can't repeat names in other pc.
gateway is the box or router that connects you lan with internet or other network.
dns is the service that translates name address to ip address. if you need you can set up a dsn server on your linux box, or simple use the dns server of your isp.
if you are using one silgle utp cable to connect the pcs, you must use the code A in one rj, and the code B in the other.
8 More Discussions You Might Find Interesting
1. Slackware
Hey, I'm new to Linux. I have a few questions about it. I run Slackware.
After the installation the Linux installation had problems with my old hardware (network card, sound card) so I removed them and Linux would start.
But now, I can't seem to use the network card in Linux because it's not... (3 Replies)
Discussion started by: RellioN
3 Replies
2. UNIX for Dummies Questions & Answers
I have a SunOS 5.8 box and have always downloaded & applied patches via my PC, but I want to be able to go out to sunsolve directly from the console ... however, I guess it doesn't know the IP of our domain's DNS server or something.
Where are these setting held on a Sun box??? (1 Reply)
Discussion started by: FredSmith
1 Replies
3. UNIX for Advanced & Expert Users
hi everyone
this is dipendra, i am interested in networking,i know simple socket programming . and now i am wonder to get in to audio socket. i have no clue how to build audio socket.so i am looking if u can provide me a link regarding the audio socket building tutorials. (1 Reply)
Discussion started by: dipendra_regmi
1 Replies
4. IP Networking
Can anybody help me regarding networking using c language
i know how to capture the packets and to verify it`s protocol destination and source ip etc.
Can anybody help me to direct a packet coming to an ip to some other ip of my choice ........
Hope reply ... (0 Replies)
Discussion started by: Sannair
0 Replies
5. IP Networking
Hi,
I have a question on networking. I will try to ask with an example...
Suppose i am googling something, as in searching something in the google page. In this case what I basically want to know is, does the client do a connect evrytime to the server whenever a search is done in google,... (1 Reply)
Discussion started by: naan
1 Replies
6. IP Networking
I am running Ubuntu Desktop and Ubuntu Server editions on two separate VMs.
For the desktop I have set network adapters:
Adapter 1: internal network called intnet
Adapter 2: NAT
Server:
Adapter 1: internal network called intnet
Now I'm suppose to set ip addresses which I'm pretty sure... (5 Replies)
Discussion started by: shadowcat
5 Replies
7. IP Networking
Hii,
Today morning I attended an interview, they had showed me the attached image and had few questions about that.
The image shows a network with 4 nodes viz.. A B C & D and two switches(layer2) and a router(layer3). Just wanted to know can node A and node D would be on same network e.g... (4 Replies)
Discussion started by: zing_foru
4 Replies
8. IP Networking
hi
From mt windows machine I can ping a LINUX machine but there is no arp entry for the same LINUX on my windows.
How is it possible and what can I do to add the arp entry as I need it.
thanks (1 Reply)
Discussion started by: leghorn
1 Replies
LEARN ABOUT DEBIAN
vlan-interfaces
VLAN-INTERFACES(5) File formats VLAN-INTERFACES(5)
NAME
/etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format
DESCRIPTION
/etc/network/interfaces contains network interface configuration information for the ifup(8) and ifdown(8) commands. This manpage
describes the vlan extensions to the standard interfaces(5) file format.
Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which are gener-
ally needed when using (a lot of) vlans.
VLAN CREATION
Vlan interface definitions exist of the vlan interface name, and an optional 'raw-device' parameter. Vlan interfaces are numbered 1 to
4095. You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero. The following
example shows four ways to create a vlan with id 1 on interface eth0. They all result in different names.
iface eth0.1 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan1 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
iface eth0.0001 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan0001 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
# We don't have br support out of the box
iface br0.2 inet static
vlan-raw-device br0
address 192.168.1.1
netmask 255.255.255.0
# Aliases are ignored
iface br0.2:1 inet static
address 192.168.1.1
netmask 255.255.255.255
EXTRA IFACE OPTIONS
Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.
vlan-raw-device devicename
Indicates the device to create the vlan on. This is ignored when the devicename is part of the vlan interface name.
ip-proxy-arp 0|1
Turn proxy-arp off or on for this specific interface. This also works on plain ethernet like devices.
ip-rp-filter 0|1|2
Set the return path filter for this specific interface. This also works on plain ethernet like devices.
hw-mac-address mac-address
This sets the mac address of the interface before bringing it up. This works on any device that allows setting the hardware address
with the ip command.
AUTHOR
This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>
SEE ALSO
vconfig(8) interfaces(5)
vlan September 30 2007 VLAN-INTERFACES(5)