02-11-2002
This looks like another post from you. I replied to it concerning if this is a new installation. There is documented for Solaris 7 and below getting this error if you built the system without the proper OEM support.
if the client was installed from an OS Service that did
not include OEM support, the system may not have the proper packages
to run OpenWindows or CDE. The symptom of this problem is an error message similar the following, when attempting to start a windowing system:
/dev/fb: No such file or directory
Graphics Adapter device /dev/fb is of unknown type
The fix is to reload the OS with the proper OEM support -
In order to avoid the above stated problems, the following
recommendations for client configuration must be applied:
1. The easiest solution is to remove the OS Service. Then readd the
OS Service selecting the "Entire Distribution + OEM" as the
cluster type. The Entire Distribution + OEM cluster
will install all the required packages. This is more convenient
than adding individual packages especially if more clients are
going to be added at a later date.
10 More Discussions You Might Find Interesting
1. AIX
Hello
I was doing a mksysb and was given an error message that my /dev/ipldevice was missing.
when i do an lslv -m hd5 i get the following output:
LP PP1 PV1 PP2 PV2 PP3 PV3
0001 0001 hdisk0
0002 0002 hdisk0
I check other... (3 Replies)
Discussion started by: mhenryj
3 Replies
2. Solaris
Hi, Anyone can help
My solaris 8 system has the following
/dev/null , /dev/tty and /dev/console
All permission are lrwxrwxrwx
Can this be change to a non-world write ??
any impact ?? (12 Replies)
Discussion started by: civic2005
12 Replies
3. Ubuntu
HI All
I am doing first steps in debugging with GDB.
I have been suggested to redirect output to another terminal using the command using
tty /dev/ttyb
I had a look at my ubuntu doing ls /dev/tty* and I cannot find this ttyb.
What is it and how to achieve the same thing?
I am... (0 Replies)
Discussion started by: manustone
0 Replies
4. AIX
Hello,
I attached a tape drive to one of my partitions but i cannot find the device.
I run the command lsdev|grep rmt but i dont get anything in return.
When i run lsslot -c slot i can see the slot number and the device that belongs to the tape drive but i cannot find any rmt files in /dev.... (6 Replies)
Discussion started by: omonoiatis9
6 Replies
5. Solaris
Our used size is 83 gb. Total of the folders and documents size is46,2 gb. 83-46=37 gb.
Where is my space. Where was lost?
Could you please I need your opinions?
{root}/space>du -s -h *
308K alaerrm-jprof
1K argerela
20G baerckup_in
1.8G cererm
28M ecerlipselink
... (8 Replies)
Discussion started by: getrue
8 Replies
6. SuSE
Hello all.
I have a device thats suposed to be /dev/sg7 but when I do "ls -laF /dev/sg*" all sgXX are there from 0 to 15 except 7. what is going wrong:mad:. Please its urgent:wall: (1 Reply)
Discussion started by: eXadra
1 Replies
7. Solaris
So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following:
devfsadm -Cv
powermt -q
luxadm -e offline <drive path>
luxadm probe
All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Discussion started by: DustinT
13 Replies
8. Shell Programming and Scripting
Objective: To recreate the partitioning setup of /dev/sda on /dev/sdc
How would I parse the below information and initialize variables
(an array?) that can be used to build sgdisk commands in a script, regardless of the number of partitions?
Something along the lines of:
sgdisk -n... (12 Replies)
Discussion started by: RogerBaran
12 Replies
9. Red Hat
Hi,
Please suggest steps to change grub from /dev/sda to /dev/sdb, (1 Reply)
Discussion started by: manoj.solaris
1 Replies
10. HP-UX
Hi,
In our HP-UX B.11.11. I could not find dev/urandom and dev/random
Are all pseudo-devices implemented as device drivers, or in need to run /configure some package to install the package to have dev/urandom.
Please help (4 Replies)
Discussion started by: rashi
4 Replies
GO(1) General Commands Manual GO(1)
NAME
go - tool for managing Go source code
SYNOPSIS
go command [arguments]
DESCRIPTION
The Go distribution includes a command, named go, that automates the downloading, building, installation, and testing of Go packages and
commands.
COMMANDS
Each command is documented in its own manpage. For example, the build command is documented in go-build(1). The commands are:
build compile packages and dependencies
clean remove object files
doc run godoc on package sources
env print Go environment information
fix run go tool fix on packages
fmt run gofmt on package sources
get download and install packages and dependencies
install
compile and install packages and dependencies
list list packages
run compile and run Go program
test test packages
tool run specified go tool
version
print Go version
vet run go tool vet on packages
EXAMPLES
TODO
SEE ALSO
go-build(1), go-clean(1).
AUTHOR
This manual page was written by Michael Stapelberg <stapelberg@debian.org>, for the Debian project (and may be used by others).
2012-05-13 GO(1)