Sponsored Content
Full Discussion: Move a disk to Sol. 2.6
Special Forums Hardware Filesystems, Disks and Memory Move a disk to Sol. 2.6 Post 15183 by sunshine on Monday 11th of February 2002 04:59:44 PM
Old 02-11-2002
Move a disk to Sol. 2.6

I removed an external Sun disk (with data on it) from an old 2.6 system and added the disk to another 2.6 system. The new system seems to recognize the system (verified by the format command).

When try to mount I am getting, I got the error:
mount: /dev/dsk/c1t1d0s6 is not this fstype.

I then tried to fsck and get the following error:
BAD SUPER BLOCK: MAGIC NUMBER WRONG
USE AN ALTERNATE SUPER-BLOCK TO SUPPLY NEEDED INFORMATION;

I used the newfs -Nv to find out alternate superblock info. and still I got the same above error.

TIA
 

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Move hard disk to another SCSI host

I was using an external SCSI disk on a Sun Ultra60 (Solaris 7) as the boot device. It was labelled c1t0d0. I then moved it into the internal removable mounts and it should become c0t0d0, but it apparently didn't change properly. When the machine boots, it gets host information from the disk... (2 Replies)
Discussion started by: Solaris
2 Replies

2. Solaris

Move root disk to new server

Hi, I need to do an installation where I have identical hardware at both sites and create the installation at one site and take the disk to the other site. Question: Do I need to do anything special for the OS to come up properly? thanks. (18 Replies)
Discussion started by: VirginiaSA
18 Replies

3. UNIX for Advanced & Expert Users

luupgrade: Sol 8 -> Sol 10 u7 (5/09)

Greetings Forumers! I ran into an issue after running luupgrade on v880 running Solaris 8. I want to upgrade to Solaris 10. When I rebooted the system I noticed the file systems listed as such: # df -h Filesystem size used avail capacity Mounted on /dev/dsk/c1t1d0s0 ... (2 Replies)
Discussion started by: bluescreen
2 Replies

4. Solaris

Disk free space planning for Sol 10 LU

I'm getting ready to start a LU from Sol 9 to Solaris 10. I want to ensure that I have enough disk space for future upgrades. What I don't know is what free space Solaris requires. If I have 10GB of free space in /opt, will Solaris 10 use that for a LU? Or, do I need to allocate 10GB of space... (5 Replies)
Discussion started by: zeekstern
5 Replies

5. Solaris

Move partition to new disk

Hi, The disks of my servers are getting full and I need to move the /export/home partition on to a new set of disks. I already have 2 mirrored disks and have added 2 more and mirrored them after creating the filesystem on them. Do I just need to edit the /etc/vfstab and point the /export/home... (1 Reply)
Discussion started by: run_time_error
1 Replies

6. Solaris

JASS - upgrading from Sol 9 to Sol 10

Do I need to reinstall/rerun JASS after upgrading from Sol9 to Sol10? Just wondered if the upgrade procedure overwrote any of the settings etc? (0 Replies)
Discussion started by: psychocandy
0 Replies

7. Solaris

ZFS rpool physical disk move

I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware. I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror. Are there any... (1 Reply)
Discussion started by: Metasin
1 Replies

8. UNIX for Dummies Questions & Answers

Move os from 1 disk to the other

Hi, I have server with 2 active disk, but disk 1 contain big part of os is falling, how can i move everything to disk 2 and then remove the disk 1? Thanks (4 Replies)
Discussion started by: prpkrk
4 Replies

9. Linux

Move OS to storage disk

Hi We have RHEL 7.3 running from local disk and we want to move it to storage. I am unable to find any proper procedure to do this activity. Please help. (4 Replies)
Discussion started by: powerAIX
4 Replies

10. Solaris

Move root disk to new identical hardware

We have in a couple of occasions moved root disk & flashcard in netra 240 to new identical hardware instead of replacing mb in dead server. Flashcard is to preserve mac adresses and mainly hostid for license stuff. Works without doing anything other than poweron & boot. Now we have a similar... (5 Replies)
Discussion started by: stockhes
5 Replies
volunroot(8)						      System Manager's Manual						      volunroot(8)

NAME
volunroot - Remove Logical Storage Manager hooks for rootable volumes SYNOPSIS
/usr/sbin/volunroot [-a | -A] OPTIONS
Specifies that all volumes on the system disk be converted back to UNIX disk partitions, not just the root and swap volumes, rootvol and swapvol. Forces removal of the private region unless it is the last one in the system. DESCRIPTION
The volunroot script can be used to restore the accessibility of the root, swap, and other file systems on the boot disk directly through disk partitions instead of through volume devices. The script also removes other changes that were made to enable booting of the system from the root volume, so that the system will boot with no dependency on the Logical Storage Manager. When used with no options, volunroot affects only the root and swap volumes, rootvol and swapvol. For volunroot to work properly, only one plex must exist for each of the affected volumes. This plex must be the one created by volrootmir or the original plex created when the root disk was encapsulated. This ensures that the underlying subdisks will have equivalent partitions defined for them on the disk. If these conditions are not met, the volunroot operation fails and none of the volumes are converted to disk partitions. The unwanted plexes can be removed using either voledit or volplex. SEE ALSO
volencap(8), voldiskadm(8), voledit(8), volintro(8), volplex(8), volrootmir(8) volunroot(8)
All times are GMT -4. The time now is 09:01 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy