Modifying IP Address/Gateway/Subnet in SCO Unix Post: 12650

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

IP address and gateway info

How can I change the IP address and gateway info on a unix server?

2. UNIX for Dummies Questions & Answers

How can I change the gateway address on my sco Openserver 5.0.6. A cisco firewall is recently installed but the gateway on the system is still pointing at the old one. I want it to use the gateway address of the router. Please help. Thanks

3. SCO

ACL for Subnet/IP address

I am trying to find out if you can create an ACL for telnet sessions and restrict it to a certain subnet/IP range.. any information or where to look would be greatly appreciated. thanks

4. Shell Programming and Scripting

ip address and subnet comparing

Hmmm, tough question for me, so I put it here. I am trying to use shell script or mysql to do the following thing. tableA, in which all are single ips. sip ------- 1.2.3.4 8.8.8.8 123.3.32.1 .... and tableB, a list of our group subnets. subnet --------- 1.0.0.0/8 20.0.1.0/24

5. Programming

how we can get gateway address

how we can get the gateway address. i know gethostname used for ipaddress how we can get the system gateway address. thank u inadvance, sree

6. IP Networking

Static IP / Subnet mask and Gateway

Hi all, I installed Fedora 9 + squid at one of PC at work. Our company has windows 2003 servera acting as DHCP server. During installation, i set linux box up as Static IP (192.168.0.100) But once installation completed, The pc is assigned a different IP address instead of 192.168.0.100....

7. IP Networking

Migrating existing Subnet to a new subnet and changing ip addresses in UNIX

Hi, My project needs to migrate the existing Subnet (255.255.255.0) to a new subnet and change the ipaddresses (currently C class). How can I do that. I need some information. John

8. IP Networking

lookup ip address, subnet mask, gateway, and dns at same time

Is there a command that can lookup ip address, subnet mask, gateway, and dns all at the same. I know ifconfig can lookup ip address and subnet mask. I know route -n can lookup gateway. Not sure about a dns command. So I hope there is a way to lookup ip address, subnet mask, gateway, and dns all at...

9. Shell Programming and Scripting

Grep IP address form a text file along with the subnet

I have an input file: class 1 3 5 10.10.10..0/23 hicks jimmy class 3 10.12.10.0/22 mike class.019283 10.10.15.10/20 henry gym.847585 45 192.168.10.0/22 nancy jim steve maya The output should look like this: 10.10.10..0/23 10.12.10.0/22 10.10.15.10/20 192.168.10.0/22 I have the...

10. Shell Programming and Scripting

Get all ip address from subnet mask

I have this subnet file shown below. How can I calculate all ip addresses from that list 103.22.200.0/22 141.101.64.0/18 10.0.0.0/22I need to be able to read the subnet file and print all IPs in those subnet to an out put file

LEARN ABOUT OSF1

vb

vb(7)							 Miscellaneous Information Manual						     vb(7)

NAME

       vb, sys_attrs_vme_vba - VMEbus backplane Ethernet interface

SYNOPSIS

       controller vb0 at vba0

DESCRIPTION

       The  VMEbus  backplane (vb) interface provides access to an Ethernet network through the VMEbus backplane driver, which acts as an Ethernet
       Datalink Layer driver.  This interface allows VMEbus-based systems to communicate directly over the VMEbus to other VMEbus-based systems on
       the same backplane, or on other Ethernet connected systems outside the backplane through a gateway node on the backplane.

       Both  the  Tru64  UNIX  and VxWorks for Alpha (Version 3.1 or higher) software support the vb driver as well as communication between these
       systems on the same backplane.  The Tru64 UNIX vb driver is supported on AXPvme and Alpha VME SBCs and Alpha VME 2100 systems.

       The VMEbus backplane interface requires you to modify the /etc/sysconfigtab file on your AXPvme or Alpha VME system in order  to  configure
       the  vb driver and to map VMEbus windows for the system.  Mapping the VMEbus windows on one node requires knowledge about every node in the
       vb network.

									  Note

       Do not modify any vme_vba kernel subsystem attributes.  To configure a vb network node, you modify attributes of the vb	driver	(vb:)  and
       the system's VMEbus adapter (vba_vipvic: or vba_univ:).

       See System Configuration Supplement: OEM Platforms for detailed information about the use of the vb interface on Alpha VME systems, includ-
       ing the following topics: VMEbus backplane (vb) network overview Configuring vb network nodes  Modifying  vb  driver  attributes  Modifying
       vba_vipvic adapter attributes Modifying vba_univ adapter attributes Examples Related ioctl commands Diagnostic messages Errors

RELATED INFORMATION

       Interfaces:  sys_attrs_vba_vipvic(7), sys_attrs_vba_univ(7), sysconfigdb(8)

       Network Administration, System Configuration Supplement: OEM Platforms delim off

																	     vb(7)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

IP address and gateway info

Discussion started by: gguzman

2. UNIX for Dummies Questions & Answers

gateway address

Discussion started by: sshokunbi