Disks on AIX Post: 101043

10 More Discussions You Might Find Interesting

1. AIX

system disks on aix 5.3

hello i'm running on P570 box aix 5.3 8 cpus 24G ram there are 1850 users loged in to this box the problem is that the two sysytem disks busy all the time hdisk0 100% busy hdisk1 100% busy some one have an idea what writing to this disks? thanks ariec

2. AIX

Configurin EMC SAN disks on AIX

This may sound like an absolute rookie question, and it is. I have been working on Migrating our HP and Solaris servers to the new EMC SAN and know the routines backwards. Now we've suddenly got a new IBM server and I don't even know how to check if it is connected to the switch. Can someone...

3. Solaris

Re-using disks

I would like to know if I can move the disks from a V240 chassis into a V440 chassis to use the increased resources (CPU & Memory) to boost performance. I know you can move disks between V210/240 chassis's, but I'm not sure if this would work between 240s & 440s. Any help would be much appreciated.

4. AIX

Configuring new disks on AIX cluster

We run two p5 nodes running AIX 5L in a cluster mode (HACMP), both the nodes share external disk arrays. Only the primary node can access the shared disks at a given point of time. We are in the process of adding two new disks to the disk arrays so as to make them available to the existing...

5. AIX

how to detect removable disks or volume in AIX using command

Hi I am new to AIX and any help regarding the same would be really appriciated, thanks In advance. My priority issue is how to detect from command line that the volume / disk on AIX machine is a USB or removable disk /volume and if possible can we list out details for that disk / volume

6. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI...

7. AIX

A solution to the mkvg failure when adding iSCSI disks to AIX.

Previous forum threads have noted that AIX cannot use iSCSI disks because it fails when trying to add them to a volume group using mkvg. The failure is caused by AIX's use of the SCSI "WRITE AND VERIFY"(0x2e) command which some iSCSI targets do not support. We experienced the same problem using...

8. AIX

Issue with increasing size of SAN disks on AIX

HI, I have had an issue last night while trying to extend a filesystsem . chvg -g <vg> command cameback with an error 0516-1790 chvg: Failed bootinfo -s hdisk9. Ensure the physical volume is available and try again. 0516-732 chvg: Unable to change volume group u01vg. the VG has 1...

9. AIX

Stale PPs in AIX, failed disks.. how to replace?

I have a AIX 7.1 system that has 3 failed disks, 1 in rootvg and 2 in vg_usr1. Here is the output of lspv. # lspv hdisk0 00044d4dfbb11575 vg_usr1 active hdisk1 0000150179158027 vg_usr1 active hdisk2 ...

10. AIX

How to reclaim hard disks and IP's in AIX?

Hello I recently received a request to reclaim hard disks and IP addresses within an AIX system(s). THe file systems are no longer in use and the client has indicated that it is OK to remove them and reclaim the disks and release the IP's. Now, since the file systems belong to a Volume group I...

LEARN ABOUT HPUX

vxconfigbackup

vxconfigbackup(1M)														vxconfigbackup(1M)

NAME

       vxconfigbackup - back up disk group configuration

SYNOPSIS

       /etc/vx/bin/vxconfigbackup [-l directory] [[dgname ...] | [dgid ...]]

DESCRIPTION

       The  vxconfigbackup  utility  can  be  used to backup up the configuration information for one or more disk groups.  The disk groups may be
       specified either by name or by ID.  If no disk groups are specified, all disk group configurations are backed up.

OPTIONS

       -l directory
		 Specifies a directory other than the default where the backup configuration files are to be written.

		 Note: The default backup directory is /etc/vx/cbr/bk.

EXAMPLES

       Back up the configuration of the mydg disk group to the directory /dgbackup/mydg:

		 vxconfigbackup -l /dgbackup/mydg mydg

FILES

       /etc/vx/cbr/bk/dgname.dgid/dgid.dginfo
		 Default location of backup file for disk group information.

       /etc/vx/cbr/bk/dgname.dgid/dgid.diskinfo
		 Default location of backup file for disk attributes.

       /etc/vx/cbr/bk/dgname.dgid/dgid.binconfig
		 Default location of backup file for binary configuration copy.

       /etc/vx/cbr/bk/dgname.dgid/dgid.cfgrec
		 Default location of backup file for configuration records in vxprint -m format.

NOTES

       The vxconfigbackupd daemon automatically backs up a disk group's new configuration to the default backup directory whenever the	configura-
       tion is changed.  The vxconfigbackup command is provided to back up the configuration manually at any other desired time.

       The  disk  group  configuration	backup and restore utilities do not save any data in the public region. This includes file system or other
       application data that is configured within VxVM objects.

SEE ALSO

       vxconfigbackupd(1M), vxconfigrestore(1M)

VxVM 5.0.31.1							    24 Mar 2008 						vxconfigbackup(1M)

10 More Discussions You Might Find Interesting

1. AIX

system disks on aix 5.3

Discussion started by: ariec

2. AIX

Configurin EMC SAN disks on AIX

Discussion started by: ronellevan

3. Solaris

Re-using disks

Discussion started by: Chains

4. AIX

Configuring new disks on AIX cluster

Discussion started by: dnicky