Questions About Using Escape characters ('\') In Terminal

9 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Escape characters in a variable

Debian 9 64x - LXDE How can i disable escape sequences in a variable? #!/bin/bash #mainscript . "./links.bash" echo "$red_start This text should be red $color_end"#!/bin/bash #links.bash #colors red_start="\eOutput that i get: \e Output expected: This text should be...

2. Shell Programming and Scripting

How to escape all special characters?

I have an application which I am integrating with that accepts the password via a CLI. I am running in to issues with passwords that contain special characters. I tried to escape them all, but I ran in to an issue where I cannot escape the characters ' ] My attempt is as follows: $...

3. Shell Programming and Scripting

Escape characters

i am executing script from A server which will execute the script in B server , as below. ssh A 'ssh B echo 'select * from testing where name ='test'' i am getting the below output. select * from testing where name=test but i need the output where clause with quotes , tried with...

4. Shell Programming and Scripting

Replace special characters with Escape characters?

i need to replace the any special characters with escape characters like below. test!=123-> test\!\=123 !@#$%^&*()-= to be replaced by \!\@\#\$\%\^\&\*\-\=

5. UNIX for Dummies Questions & Answers

Escape Characters on various shells

Hi, I want to know if escape charaters work on all the popular UNIX shells. More specifically I want to know if echo "\c" will work on most of the UNIX shells and are there any specific shells on which \c won't work. Please help. Thanks, Vineet

6. Shell Programming and Scripting

Searching for escape characters

Hi all I have been trying to write a script to look for a set of specific escape characters in a file. On viewing the file via vi it shows this : ^ I understand this means no end of line. I have tried a vary of grep parameters such as grep ^\^. filename grep --binary-file=binary without...

7. Shell Programming and Scripting

escape characters..

hey i want to know the unix commands to replace all the character escape sequences with their "C" values in a string... thanks in advance..! Regards, Sharanya

8. Shell Programming and Scripting

number of escape characters?

Hi, I am trying to execute the following command from a batch script, but no matter how many escape characters I put in it doesn't execute properly. It works fine from the command line with quotes around the -exec part. #!/bin/sh /usr/local/bin/sudo /usr/atria/bin/cleartool setview -exec...

9. UNIX for Advanced & Expert Users

lp FormFeed Escape characters

I'm trying to modify the /usr/lib/lp/model/netstandard file to generate a header for all the print jobs that are sent, but there is no formfeed defined so the the job prints right after the header with no page break. What is the sequence I need in order to generate a formfeed? Or, do you have...

LEARN ABOUT OSX

xcode-select

XCODE-SELECT(1) 					    BSD General Commands Manual 					   XCODE-SELECT(1)

NAME

       xcode-select - Manages the active developer directory for Xcode and BSD tools.

SYNOPSIS

       xcode-select [-h|--help] [-s|--switch <path>] [-p|--print-path] [-v|--version]

DESCRIPTION

       xcode-select  controls  the location of the developer directory used by xcrun(1), xcodebuild(1), cc(1), and other Xcode and BSD development
       tools. This also controls the locations that are searched for by man(1) for developer tool manpages.

       This allows you to easily switch between different versions of the Xcode tools and can be used to update the path to the  Xcode	if  it	is
       moved after installation.

   Usage
       When  multiple  Xcode  applications  are  installed  on	a system (e.g. /Applications/Xcode.app, containing the latest Xcode, and /Applica-
       tions/Xcode-DP.app containing a developer preview) use xcode-select --switch path/to/Xcode.app to specify the Xcode that you  wish  to  use
       for command line developer tools.

       After  setting  a developer directory, all of the xcode-select provided developer tool shims (see FILES) will automatically invoke the ver-
       sion of the tool inside the selected developer directory. Your own scripts, makefiles, and other tools can  also  use  xcrun(1)	to  easily
       lookup  tools inside the active developer directory, making it easy to switch them between different versions of the Xcode tools and allow-
       ing them to function properly on systems where the Xcode application has been installed to a non-default location.

OPTIONS

       -h, --help
	      Prints the usage message.

       -s <path>, --switch <path>
	      Sets the active developer directory to the given path, for example /Applications/Xcode-DP.app. This command must be run  with  supe-
	      ruser  permissions (see sudo(8)), and will affect all users on the system. To set the path without superuser permissions or only for
	      the current shell session, use the DEVELOPER_DIR environment variable instead (see ENVIRONMENT).

       -p, --print-path
	      Prints the path to the currently selected developer directory. This is useful for inspection, but scripts and other tools should use
	      xcrun(1) to locate tool inside the active developer directory.

       -r, --reset
	      Unsets  any user-specified developer directory, so that the developer directory will be found via the default search mechanism. This
	      command must be run with superuser permissions (see sudo(8)), and will affect all users on the system.

       -v, --version
	      Prints xcode-select version information.

       --install
	      Opens a user interface dialog to request automatic installation of the command line developer tools.

ENVIRONMENT

       DEVELOPER_DIR
	  Overrides the active developer directory. When DEVELOPER_DIR is set, its value will be used instead of the system-wide active  developer
	  directory.

	  Note	that  for historical reason, the developer directory is considered to be the Developer content directory inside the Xcode applica-
	  tion (for example /Applications/Xcode.app/Contents/Developer). You can set the environment variable to either the actual Developer  con-
	  tents  directory, or the Xcode application directory -- the xcode-select provided shims will automatically convert the environment vari-
	  able into the full Developer content path.

EXAMPLES

       xcode-select --switch /Applications/Xcode.app/Contents/Developer
	  Select /Applications/Xcode.app/Contents/Developer as the active developer directory.

       xcode-select --switch /Applications/Xcode.app
	  As above, selects /Applications/Xcode.app/Contents/Developer as the active developer directory. The Developer content directory is auto-
	  matically inferred by xcode-select.

       /usr/bin/xcodebuild
	  Runs xcodebuild out of the active developer directory.

       /usr/bin/xcrun --find xcodebuild
	  Use xcrun to locate xcodebuild inside the active developer directory.

       env DEVELOPER_DIR="/Applications/Xcode-DP.app" /usr/bin/xcodebuild
	  Execute xcodebuild using an alternate developer directory.

FILES

       /usr/bin/xcrun
	  Used to find or run arbitrary commands from the active developer directory. See xcrun(1) for more information.

       /usr/bin/agvtool  /usr/bin/desdp  /usr/bin/ibtool  /usr/bin/ictool  /usr/bin/instruments /usr/bin/iprofiler /usr/bin/opendiff /usr/bin/sdef
       /usr/bin/sdp /usr/bin/xcodebuild /usr/bin/xed
	  Runs the matching Xcode tool from with the active developer directory.

       /usr/bin/BuildStrings   /usr/bin/CpMac	/usr/bin/DeRez	 /usr/bin/GetFileInfo	 /usr/bin/MergePef    /usr/bin/MvMac	/usr/bin/ResMerger
       /usr/bin/RezDet	/usr/bin/RezWack /usr/bin/Rez /usr/bin/SetFile /usr/bin/SplitForks /usr/bin/UnRezWack /usr/bin/ar /usr/bin/as /usr/bin/asa
       /usr/bin/bison  /usr/bin/c89  /usr/bin/c99  /usr/bin/clang++  /usr/bin/clang  /usr/bin/cmpdylib	 /usr/bin/codesign_allocate   /usr/bin/cpp
       /usr/bin/ctags /usr/bin/ctf_insert /usr/bin/dsymutil /usr/bin/dwarfdump /usr/bin/flex++ /usr/bin/flex /usr/bin/g++ /usr/bin/gatherheaderdoc
       /usr/bin/gcc    /usr/bin/gcov	/usr/bin/git-cvsserver	  /usr/bin/git-receive-pack	/usr/bin/git-shell     /usr/bin/git-upload-archive
       /usr/bin/git-upload-pack   /usr/bin/git	 /usr/bin/gm4	/usr/bin/gnumake   /usr/bin/gperf   /usr/bin/hdxml2manxml  /usr/bin/headerdoc2html
       /usr/bin/indent	/usr/bin/install_name_tool  /usr/bin/ld  /usr/bin/lex	/usr/bin/libtool   /usr/bin/lipo   /usr/bin/lldb   /usr/bin/lorder
       /usr/bin/m4   /usr/bin/make   /usr/bin/mig   /usr/bin/mkdep   /usr/bin/nasm  /usr/bin/ndisasm  /usr/bin/nm  /usr/bin/nmedit  /usr/bin/otool
       /usr/bin/pagestuff  /usr/bin/ranlib  /usr/bin/rebase  /usr/bin/redo_prebinding	/usr/bin/resolveLinks	/usr/bin/rpcgen   /usr/bin/segedit
       /usr/bin/size  /usr/bin/strings	/usr/bin/strip	/usr/bin/svn  /usr/bin/svnadmin  /usr/bin/svndumpfilter /usr/bin/svnlook /usr/bin/svnserve
       /usr/bin/svnsync /usr/bin/svnversion /usr/bin/unifdef /usr/bin/unifdefall /usr/bin/xml2man /usr/bin/yacc
	  Runs the matching BSD tool from with the active developer directory.

SEE ALSO

       xcrun(1)

HISTORY

       The xcode-select command first appeared in Xcode 3.0.

Mac OS X							   July 30, 2013						   XCODE-SELECT(1)

UNIX for Dummies Questions & Answers