SVM metastat -- needs maintenance

10 More Discussions You Might Find Interesting

1. Solaris

Metastat shows state needs maintenance

Hi, We have a Solaris 10 machine with update 11 and was configured with IBM storage. It was assigned 2 LUNs (each 70GB) which were striped to make it 140GB. we have taken full backup of entire machine and Our storage team replaced IBM storage with Nimble storage (they did storage-level...

2. Solaris

metastat |grep Needs

Dear, Required an script such that : If metastat |grep Needs , results in some output then this command to be executed for the same : opcmsg object=metastat a=OS msg_grp=OpC severity=critical msg_text="Need maintenance for the system $line" With regards, Mjoshi

3. Shell Programming and Scripting

Grep contents from metastat command

Hi, after issuing metastat command I am getting output as follows Actually these soft partitions are more than 100. I want output as Device Name & Size. for eg d4004 2.0 GB

4. Solaris

restore metastat configuration after solaris upgrade

Greetings How can i restore metastat db after a solaris upgrade (9 to 10)? will it work if i save and restore /etc/vfstab and /etc/lvm/md.cf file? root@netad# metastat d35: Mirror Submirror 0: d38 State: Okay Submirror 1: d39 State: Okay Pass:...

5. Solaris

SVM Solaris 8 Problem. Metastat output looping

Hi friends, I'm newbie to SVM. Just wanna try installed it on one of our server (to do mirroring for disk0 and disk1) but i think im lost until now. :( the steps i've taken is as below:- 1.prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2 2.metadb -a -c 3 -f c1t0d0s7...

6. Solaris

Metastat shows "maintenance" and "last-erred"

Hi All, Sorry to post a problem for my first post but I'm in a bit of a pickle at the minute! I have an Ultra45 connected to a Storedge 3100 series, 2 internal, 2 external disks with a db application running on the external disks. Now everything is working fine and we've had no downtime or...

7. Solaris

Softpartition State: Errored in Command MetaStat

Hi people, I have on problem when execute the command METASTAT... d60: Soft Partition Device: d10 State: Errored Size: 12582912 blocks (6.0 GB) Someone help me? Thank you very much

8. Filesystems, Disks and Memory

What should I do with this metastat result? metareplace everything?

I have to rescue the volumes in a soloris 7 machine. The metastat returns the following result: d6 is dying with iostat -nE returns Harderror 3, Transports error 9 Can some offer me some help? Thank you very much.

9. Solaris

SVM - metastat - Last Erred

My company is running a solaris 2.7 machine. The machine is getting slow recently. I have no expert in solaris. Please help. I checked the log in /var/adm/message: I also checked with the command iostat -nE. It returns: Metastat returns the followings: What should i do now?...

10. Solaris

Help on metastat

hi all, can someone pls pass on your suggestion? Firs thing I am testing a script which checks for the pattern 'Needs Maintenance' from metastat output and prints some messages in the screen. So i need to simulate an error in mirrored disk for metastat to give this message 'Needs Maintenance'....

LEARN ABOUT OPENSOLARIS

sulogin

sulogin(1M)						  System Administration Commands					       sulogin(1M)

NAME

       sulogin - access single-user mode

SYNOPSIS

       sulogin

DESCRIPTION

       The sulogin utility is automatically invoked by init when the system is first started. It prompts the user to type a user name and password
       to enter system maintenance mode (single-user mode) or to type EOF (typically CTRL-D) for normal startup (multi-user mode). The user should
       never directly invoke sulogin. The user must have the solaris.system.maintenance authorization.

       The  sulogin utility can prompt the user to enter the root password on a variable number of serial console devices, in addition to the tra-
       ditional console device. See consadm(1M) and msglog(7D) for a description of how to configure a serial device to  display  the  single-user
       login prompt.

FILES

       /etc/default/sulogin

	   Default value can be set for the following flag:

	   PASSREQ

	       Determines if login requires a password. Default is PASSREQ=YES.

       /etc/default/login

	   Default value can be set for the following flag:

	   SLEEPTIME

	       If  present, sets the number of seconds to wait before login failure is printed to the screen and another login attempt is allowed.
	       Default is 4 seconds. Minimum is 0 seconds. Maximum is 5 seconds.

	       Both su(1M) and login(1) are affected by the value of SLEEPTIME.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsr			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       auths(1), login(1), consadm(1M), init(1M), su(1M), attributes(5), msglog(7D)

NOTES

       By default, the root user has all authorizations.

       Granting the solaris.system.maintenance authorization to the Console User Rights Profile may have an undesirable side  effect  of  granting
       the  currently logged in user maintenance mode access. The solaris.system.maintenance authorization should be directly granted to appropri-
       ate users rather than through the Console User Rights Profile.

SunOS 5.11							    21 Aug 2008 						       sulogin(1M)

Solaris