9 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
Hi Guys,
I am stuck in between and seeking help here.
Requirement: A script that will run every morning which will connect to Mysql database and run the query to inform us about the holidays (it will also check if there were any holidays during last 2 business days). So the three queries are... (11 Replies)
Discussion started by: Sambit Sahu
11 Replies
2. Solaris
Hi,
I am facing issue with one of the drive is solaris 10. it is showing offline in the messages file
scsi: WARNING: /pci@2,600000/QLGC,qlc@0/fp@0,0/ssd@w5006016746e00b1b,0 (ssd0):
drive offline
genunix: WARNING: Page83 data not standards compliant DGC LUNZ 0430
... (1 Reply)
Discussion started by: Prasanth T K
1 Replies
3. HP-UX
Hi,
I wanted to configure new iscsi port on HPUX system, i added the target port address and configured it, once done, went to array side and searched for that host iqn number , but was nt able to find the same, came to host, then when i ran "iscsiutil -pVS" command it gave me below result
... (0 Replies)
Discussion started by: Vinay Kumar D
0 Replies
4. Solaris
Hi,
I've noticed that mpathadm states that one of our luns has no active paths:
/dev/rdsk/c6t60000970000298700009533031324333d0s2
Total Path Count: 4
Operational Path Count: 4
/dev/rdsk/c6t60000970000298700009533031333037d0s2
... (3 Replies)
Discussion started by: badoshi
3 Replies
5. UNIX for Dummies Questions & Answers
Greetings!
I need a quick way to change the format in a table of data
Here is an example of the input:
10 72 Value=177 VDB=0.0245 Value4=0,0,171,0
10 274 Value=238 VDB=0.0433 Value4=29,0,205,0
10 312 Value=222 VDB=0.0384 Value4=8,0,190,19
10 540 Value=405 VDB=0.0391 Value4=13,30,153,195... (3 Replies)
Discussion started by: Twinklefingers
3 Replies
6. Red Hat
Hi guys I have been asked for the following:
SMI Oracle database PTP10 Oracle 10g RAC on usdfslprac4 and usdfslprac5 Linux boxes is reaching its space limit. It is just 20 GB away from being completely out of disk space. And then database will stop working and SMI system hence will be impacted.... (0 Replies)
Discussion started by: 300zxmuro
0 Replies
7. Solaris
Hi Kudo,
I wanna to know that how can I do mpxio device name to os native name mapping without using stmsboot -L I tried everything still not able to got the solution till I able to get these o/p
here is native disk info as well physical wat is the logical OS name of the disk
... (1 Reply)
Discussion started by: tarunn.dubeyy
1 Replies
8. Filesystems, Disks and Memory
hi fren
i am facing this problem
i have sun 6140 storage
30 volumes
bt my vxdisk list output is showing 37 disk
which shd nt b there
has neone faced this proble earlier
vxdiks list output is like this
SUN6140-2_0 auto - - online c4t201700A0B84853C0d2s2
SUN6140-2_1 auto - - online... (13 Replies)
Discussion started by: bond_ankur
13 Replies
9. Shell Programming and Scripting
Hello,
For 2 days now i've been searching for a solution to this. I am now beginning to doubt this is even possible. It's even harder when you don't know how to search for it. (which keywords generate enough relevancy etc..)
I need to parse a config file to generate a CSV file in return.
It... (7 Replies)
Discussion started by: zer0dvide
7 Replies
scconf_quorum_dev_netapp_nas(1M) System Administration Commands scconf_quorum_dev_netapp_nas(1M)
NAME
scconf_quorum_dev_netapp_nas - add and remove shared Network Appliance network-attached storage (NAS) quorum devices and change various NAS
cluster quorum configuration properties or states.
SYNOPSIS
scconf {-a|-c|-r} -q name=devicename otheroptions
DESCRIPTION
Note -
Beginning with the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software
still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more infor-
mation about the object-oriented command set, see the Intro(1CL) man page.
A Network Appliance NAS device can be configured as a quorum device for Sun Cluster. The NAS configuration information consists of:
o a device name, which must be unique across quorum devices
o
a filer name, which defaults to the device name if not specified
o a LUN ID, which defaults to 0 if not specified
To provide support for NAS devices as quorum devices, the administrator must install the quorum device support module provided by Network
Appliance. If this module is not available, scconfprevents the addition of the quorum device. See Sun Cluster With Network-Attached Storage
Devices Manual for Solaris OS for instructions about obtaining the support module.
Additionally, the iSCSI license must be valid for the Network Appliance device.
OPTIONS
The following options can be used for NAS quorum devices. See scconf(1M) for the list of supported generic options. See scconf_quo-
rum_dev_netapp_nas(1M) for options that are specific to shared disk quorum devices.
The add and remove forms of the command are used to add and remove NAS quorum devices to or from the configuration. The change form of the
command is used for changing various properties of cluster quorum configuration.
Before you add a quorum device, you must set up and configure the device and the logical unit number (LUN) on the device to be configured
as a quorum device. For detailed procedures, see your Network Appliance documentation. For Sun Cluster requirements of device setup, see
Sun Cluster With Network-Attached Storage Devices Manual for Solaris OS. After the quorum device is added, you cannot change the type.
Add a NAS quorum device:
-q -a name=devicename,type=netapp_nas[,filer=filer-name][,lun_id=0]
Change a NAS quorum device's configuration:
-q -c name=devicename,{maintstate | reset}
Remove a NAS quorum device:
-q -r name=devicename
The -q option supports the following Network Appliance NAS-specific suboptions:
filer=filer-name
Specifies the name of the device on the network that you can use to access the NAS device when you are using rsh or telnet.
lun_id=0
Specifies the LUN ID on the NAS device that will be a NAS quorum device. The LUN ID defaults to 0.
When scconf is interrupted or fails while performing quorum-related operations, quorum configuration information can become inconsistent in
the cluster configuration database. If an inconsistency occurs, either run the same scconf command again or run it with the reset option to
reset the quorum information.
EXAMPLES
Example 1 Adding Network Appliance NAS Quorum Devices
The following scconf command adds the Network Appliance NAS quorum device qd1.
-a -q name=qd1,type=netapp_nas,filer=nas1.sun.com,lun_id=0
Example 2 Removing Network Appliance NAS Quorum Devices
The following scconf command removes the Network Appliance NAS quorum device qd1.
-r -q name=qd1
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWsczu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO
Intro(1CL), clquorum(1CL), cluster(1CL), scconf(1M), scconf-quorum-dev-scsi(1M)
Sun Cluster 3.2 10 Apr 2006 scconf_quorum_dev_netapp_nas(1M)