TRM(4) BSD Kernel Interfaces Manual TRM(4)NAME
trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver
SYNOPSIS
trm* at pci? dev ? function ?
scsibus* at trm?
DESCRIPTION
The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.
HARDWARE
Supported SCSI controllers include:
Tekram DC-315 PCI Ultra SCSI adapter without flash BIOS and internal SCSI connector
Tekram DC-315U PCI Ultra SCSI adapter without flash BIOS
Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
For Tekram DC-390 PCI SCSI host adapter, use pcscp(4) driver.
For Tekram DC-310/U and DC-390U/UW/F PCI SCSI host adapters, use siop(4) driver.
SEE ALSO cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), ss(4), st(4), uk(4), scsipi(9)
http://www.tekram.com/
AUTHORS
The trm driver was originally written for NetBSD 1.4/i386 by Erich Chen of Tekram Technology, and Rui-Xiang Guo rewrote the driver to use
bus_space(9) and bus_dma(9) for NetBSD 1.6.
BSD November 6, 2001 BSD
Check Out this Related Man Page
TRM(4) BSD Kernel Interfaces Manual TRM(4)NAME
trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device scbus
device trm
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
trm_load="YES"
DESCRIPTION
The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.
HARDWARE
SCSI controllers supported by the trm driver include:
o Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector
o Tekram DC-315U PCI Ultra SCSI adapter without BIOS
o Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
o Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
o Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
o Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS
For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4) driver.
SEE ALSO cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4)
http://www.tekram.com/
AUTHORS
The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen of Tekram Technology, and ported to FreeBSD 5.0 by Olivier Houchard
<cognet@FreeBSD.org>.
BSD December 8, 2002 BSD
Man Page
15 More Discussions You Might Find Interesting
1. Post Here to Contact Site Administrators and Moderators
Well, someone created a flash intro for us (their first attempt at SWiSH!)
OK,
SECOND DRAFT:
https://www.unix.com/test_intro2.swf
---------------------------
FIRST DRAFT:
https://www.unix.com/test_intro1.swf
Notice it says "Search before posting a question".....
Well????... (24 Replies)
Hello everyone. I'm trying to setup two A1000s connected to a single host w/ a dual port adapter. The host is a V480.
Do I need to have thesame firmware version on both controllers for the A1000s? If so, where can I download the latest and greatest firmware? I tried to google for it and... (8 Replies)
I seem to be having a driver issue installing a PCI SCSI card. Any ideas where I can track these down.. I can't seem to find them on the OS install disk. I'm using AIX 5.3.
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently... (7 Replies)
why is this error message keeps coming once every month. Is this a serious problem?
In the /var/adm/messages file
Nov 26 06:10:42 ids-ldap07 px: WARNING: PCI Express error report:
Nov 26 06:10:42 ids-ldap07 device_path = /pci@1e,600000/pci@0/pci@8, msg_code = 0x30, req_id = 0x340, Nov 26... (7 Replies)
Guys,
I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem.
I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80.
I connected it powered it up and at OK prompt did : boot -r
system comes up and complains about not... (6 Replies)
I have a Sun Ultra 45 that was working perfectly until i upgraded it to Update 9 with a zfs filesystem. The box is sparc based and has an internal video card. When i boot it up, i receive an X server error and, while checking /var/dt/Xerrors, the following message is displayed
Fatal server... (9 Replies)
Hi all...I have an old Sun Ultra 2 running SunOS 5.7 (I know old). These machines have 2 hard drives and one of my drives fried. I bought some replacement drives and wanted to a simple "dd" command from my one good drive to copy all to the new replacement drive. The new drives however give me a... (11 Replies)
Hi,
At first I have to say that I know nothing about Linux :(
But I am looking for solution how to copy one file from internal Lowrnace HDS flash memory.
Lowrance HDS is Linux based device.
Here is the link for firmware update files for this unit.
At the end of main firmware file there... (62 Replies)
PCI-X was popular years ago, now it's not. Today's motherboards have PCIe slots, not PCI-X slots. I'm accustomed to using Adaptec, but I believe they've been bought out by ATTO Technology. Now ATTO has a product called PCI UL50 Dual Channel VHDCI Ultra320 SCSI PCIe card. So: does the SCO UNIX... (7 Replies)
So my family is cleaning out our house and my dad stumbled on a Unix system with Unigraphix installed on it, and he remembers that it was 1 of 6 computers in a set that he used at a tool and dye machine shop where he worked. He said that the computer by itself with the monitor was $20,000! I was... (8 Replies)
Hi
I have just acquired an Ultra 5. It has 256MB of memory and a 360Mhz Ultra IIi SPARC processor. So far, I have had some typical fun and games to get it working:
- It had a dead NVRAM chip. I hacked it open and installed a CR2032. It looks suitably bodged up, but is working. I set the MAC... (8 Replies)
I have a problem with a brand new Dell laptop. BioLinux was installed on it without making the necessary changes on BIOS. The installation was completed successfully but the BIOS system cant find the OS after rebooting the machine.
I have tried to modify the BIOS setting with no luck this far. I... (7 Replies)
Hi,
On my Sun Ultra 45, display was flickering. After changing PCI slot of graphic card (XVR-300), display stablized, but, now X-server not starting. I am getting following messages
The X-server can not be started on display : 0...
See file/var/dt/Xerrors for details.
the output of... (8 Replies)
I have a known good external SCSI HD running SCO UNIX OpenServer 5.0.7. I decided that I wanted to be able to run this drive on another computer, so I bought the same SCSI card as before (LSI) and then attempted to boot on the other system. The bootup process hung with the error F painit. I've... (13 Replies)