IRQ conflict between USB and NIC SCO 5.0.7

10 More Discussions You Might Find Interesting

1. SCO

Usb Flash in SCO UNIX 5.0.6

hi How can I use my USB Flash memory in Sco 5.0.6 tanks

2. SCO

USB Printing for SCO UNIX OpenServer 5.0.7

Years ago I set up USB printing for SCO UNIX OpenServer 5.0.7 for a client--but I've misplaced my notes on how to do this! Maintenance Pack 5 is installed. I need step-by-step instructions to proceed. I've searched the SCO Knowledge Base site and found nothing there or elsewhere on the Web.

3. SCO

Install NIC on SCO openserver 5.0.2

Hi I am trying to install NIC FastNic 10/100 PCI Ethernet driver into PCI# 3 of the GA-SIML Rev 1.0 Motherboard on 1GB Hard-disk driveI have following the instruction on the CD-Disk and when I added NIC by netconfig and I do not know what is the following question: PCI BUS# DEVICE#...

4. SCO

SCO 6 + Virtualbox 2 == no NIC

Has anyone installed SCO 6 in Virtualbox? I was quite successful with 5.0.6 but then when I tried SCO 6, it will not report any nic (I am using resmgr to see who is there). The available cards under virtualbox are pcnet-pci II and II, and a few intel/pro 1000s. I have installed the maintenance pack...

5. UNIX for Dummies Questions & Answers

SCO 5.0.5 & USB flash drive

Can someone help me with instructions on how to access a USB flash drive in SCO Unix 5.0.5? I need to copy ASCII text files that have been zipped onto the USB drive for transfer to a Windows computer.

6. Programming

ncurses and usb library conflict

Hi I am writing a piece of code using gcc-3.4.4 which uses usb library (-lusb) to interact with a small robot, getting inputs from sensors and sending commands back to motors. Now my problem is that when I use ncurses library in my code to get use of keyboard functionalities, the usb inputs do...

7. SCO

an usb falsh disk under sco?

is it possible to access an usb flash disk under sco unixware 7.11? and how to do? any help is apreciated

8. SCO

in sco unix 5.0.6 ,can i use the USB?

I have a USB,can i use it in the sco unix 5.0.6?

9. UNIX for Dummies Questions & Answers

usb - deleting (irq)

FreeBSD 4.5 i installed my sound drivers (which are onboard) with the following lines in my kernel device pcm options PNPBIOS then cd /dev sh MAKEDEV snd0 output from cat /dev/sndstat show the devicedriver (correct one) ok this works nice untill i enter my kde and want to play a...

10. UNIX for Dummies Questions & Answers

Installing nic on sco 5.0.5

How do I install an intel nic on sco 5.0.5 it did not detect when i installed the program:confused:

LEARN ABOUT DEBIAN

usbipd

USBIP(8)						  System Administration Utilities						  USBIP(8)

NAME

       usbipd - USB/IP server daemon

SYNOPSIS

       usbipd [options]

DESCRIPTION

       usbipd provides USB/IP clients access to exported USB devices.

       Devices have to explicitly be exported using usbip bind before usbipd makes them available to other hosts.

       The  daemon accepts connections from USB/IP clients on TCP port 3240.  The clients authorised to connect may be configured as documented in
       hosts_access(5).

OPTIONS

       -D, --daemon

	      Run as a daemon process.

       -d, --debug

	      Print debugging information.

       -v, --version

	      Show version.

LIMITATIONS

       usbipd offers no authentication or authorization for USB/IP. Any USB/IP client running on an authorised host can connect and  use  exported
       devices.

EXAMPLES

	   server:# modprobe usbip

	   server:# usbipd -D
	       - Start usbip daemon.

	   server:# usbip list
	       - List driver assignments for usb devices.

	   server:# usbip bind -b 1-2
	       - Bind usbip-host.ko to the device of busid 1-2.
	       - A usb device 1-2 is now exportable to other hosts!
	       - Use 'usbip unbind -b 1-2' when you want to shutdown exporting and use the device locally.

SEE ALSO

       usbip(8)

usbip								   February 2009							  USBIP(8)

SCO