roar_vs_connection_obj(3) RoarAudio Programmer's Manual roar_vs_connection_obj(3)NAME
roar_vs_connection_obj, roar_vs_stream_obj, roar_vs_vio_obj - VS API interface for use of main API
SYNOPSIS
#include <roaraudio.h>
struct roar_connection * roar_vs_connection_obj(roar_vs_t * vss, int * error);
struct roar_stream * roar_vs_stream_obj (roar_vs_t * vss, int * error);
struct roar_vio_calls * roar_vs_vio_obj (roar_vs_t * vss, int * error);
DESCRIPTION
Those functions return internal connection, stream and VIO object of the VS object. They are used to use the main API with a VS opened
stream.
roar_vs_connection_obj() returns the connection object used for the control connection to the server.
roar_vs_stream_obj() returns the stream object storing information about the stream.
roar_vs_vio_obj() returns the VIO object used to read data from or send data to the server.
Returned objects are freed as soon as the VS object is closed. If the VS object was created using roar_vs_new_from_con(3) the connection is
not closed by the VS object and stay valid after close until it is closed by the program or library.
The VIO object MUST NOT be used while in buffered mode.
PARAMETERS
vss The VS object to return internal objects from.
error This is a pointer to a integer used to store the error value in case of error. This can be NULL if not used but it is very recom-
mended to use this error value to report good error messages to the user.
RETURN VALUE
On success these calls return the described object. On error, NULL is returned.
EXAMPLES
FIXME
SEE ALSO roarvs(7), libroar(7), RoarAudio(7).
RoarAudio May 2011 roar_vs_connection_obj(3)
Check Out this Related Man Page
roar_vs_connection_obj(3) RoarAudio Programmer's Manual roar_vs_connection_obj(3)NAME
roar_vs_connection_obj, roar_vs_stream_obj, roar_vs_vio_obj - VS API interface for use of main API
SYNOPSIS
#include <roaraudio.h>
struct roar_connection * roar_vs_connection_obj(roar_vs_t * vss, int * error);
struct roar_stream * roar_vs_stream_obj (roar_vs_t * vss, int * error);
struct roar_vio_calls * roar_vs_vio_obj (roar_vs_t * vss, int * error);
DESCRIPTION
Those functions return internal connection, stream and VIO object of the VS object. They are used to use the main API with a VS opened
stream.
roar_vs_connection_obj() returns the connection object used for the control connection to the server.
roar_vs_stream_obj() returns the stream object storing information about the stream.
roar_vs_vio_obj() returns the VIO object used to read data from or send data to the server.
Returned objects are freed as soon as the VS object is closed. If the VS object was created using roar_vs_new_from_con(3) the connection is
not closed by the VS object and stay valid after close until it is closed by the program or library.
The VIO object MUST NOT be used while in buffered mode.
PARAMETERS
vss The VS object to return internal objects from.
error This is a pointer to a integer used to store the error value in case of error. This can be NULL if not used but it is very recom-
mended to use this error value to report good error messages to the user.
RETURN VALUE
On success these calls return the described object. On error, NULL is returned.
EXAMPLES
FIXME
SEE ALSO roarvs(7), libroar(7), RoarAudio(7).
RoarAudio May 2011 roar_vs_connection_obj(3)
I have a script running remotely using viosvrcmd command on hmc to back up the VIO servers. these are the steps involved
1. Mount the NFS directory on to the VIO server
2. run backupios command
3. un mount the directory
I am stuck up in the 3rd step. I am not able to unmount the nfs... (6 Replies)
Hello All,
I am new to AIX VIO LPAR server. We have VIO 1.5 server installed with few logical valumes and 3-4 Virtual machines running.
I wanted to restructer the space allocation to logical values. but don't know which harddisk, hold VIO server installation.
Can someone please help to me... (8 Replies)
Hello,
Can someone point to me document or the method to make failover for VIO Servers ?
I have one VIO_Server1 which has 4 AIX LPARS
- From the VIO_SERVER1 I have assigned virtual SCSI DISK to the four LPARS
- For Ethernet I have used LHEA
So, if my VIO Server1 crashes all the LPARS... (17 Replies)
Hi,
I am little confused about the virtual Ethernet configuration on VIO and Client Partitions. There is alot of info on the internet but it gets more confusing....
If I have LHEA, it is very simple. Just assign LHEA (logical host ethernet adapter) to client partition -> run smitty tcpip and... (10 Replies)
Can u please help me in knowing the details of the servers needed,
FIBRE CABLES, HA softwares, VIO Softwares and other details.
I googled through out and couldnt get a clear idea of it. Please help me (6 Replies)
hello to all,
i am trying to assing a tape drive to a virtual partition through VIO but i get the message "rmt0" is not a valid backing device.
the oslevel of my VIO is AIX 6.1.3.0. when i run the command
lsdev |grep rmt i get the following result:
rmt0 Available 08-08-00-0,0 ... (6 Replies)
Hi All,
Besides the licenses on VIO and LPAR. What's the main difference with the two? I have installed VIO, my manager told me so, because it's like a free hypervisor but I never installed LPAR before. How do you install it? And if you can give more info on the two, that would be great.
... (5 Replies)
I am planning carving out dual VIO servers on a P750 based and would like to know how to allocate internal disks to the VIOS. This has 4 internal disks and I would to assign 2 disks to each VIO.
This is what I was thinking of assigning . Any advise?
vio1
U5802.001.9K8H757-P1-C1 PCI-E x8... (17 Replies)
Hi,
The scenario is like this:
1.We needed to assign two hdisks to an LPAR
2.SAN team gives us two ldevs
3.One of our VIO is hanging on cfgmgr operation
4. We ran cfgmgr on the smooth VIO. Got the disks and assigned the disks from there to the LPAR.(By passed the other VIO as in didnt run... (11 Replies)
I have login into a server, and when i launch this command uname -L.
I can see there is a LPAR.
But is there anymore commands i can use to get more information on the LPAR ?
like it is VIO ?
wat the IP address ?
etc, etc.
please help. Thank you. (7 Replies)
Would anyone please kindly help to solve this problem...
An LPAR with the below network configuration. ent0 and ent1 are logical lan (virtual ethernet) from VIO SEA.
en0
1.2.3.4 <- boot ip
192.168.1.1 <- persistent ip
192.168.1.10 <- service ip
en1
11.22.33.44 <- boot ip
When I... (6 Replies)
Hi All,
I've been trying to create a new LPAR for some days now but I can't get the VIO server to recognize the new LPAR. This is what I did:
On HMC create new LPAR
On HMC create new virtual scsi adapter for LPAR in VIO profile
On HMC add new virtual scsi adapter for LPAR with DLPAR... (6 Replies)
Please forgive me here as I don't fully understand what I am talking about here so if I use the wrong terminology please overlook me.
We have multiple AIX LPARs on the managed system with two VIO Servers. A Co-Worker and I are trying to set up a new LPAR client (The guy that knows this is out)... (14 Replies)
hi guys
BTW pretty new to VIO
I inherited 2 I BM Power Server - blades PS701 - One is already configured using en8
# lsdev -Cc adapter | grep ent
ent0 Available Logical Host Ethernet Port (lp-hea)
ent1 Available Logical Host Ethernet Port (lp-hea)
ent2 Available 04-20... (8 Replies)