nutscan_init(3) [debian man page]

NUTSCAN_INIT(3) 						    NUT Manual							   NUTSCAN_INIT(3)

NAME

       nutscan_init - Initialize the nutscan library.

SYNOPSIS

       #include <nut-scan.h>

       void nutscan_init();

DESCRIPTION

       The nutscan_init() function must be called at least once before using any other function of the nutscan library.

       It updates the following global variables which can be used by nutscan library user to know which scan methods are available at run-time.
       This depends on the libraries installed on the system:

	   nutscan_avail_avahi = 1 : AVAHI scan is available
	   nutscan_avail_ipmi = 1 : IPMI scan is available
	   nutscan_avail_nut = 1 : Old NUT method is available
	   nutscan_avail_snmp = 1 : SNMP method is available
	   nutscan_avail_usb = 1 : USB method is available
	   nutscan_avail_xml_http = 1 : XML HTTP method is available

       Note that if a method is reported as unavailable by those variables, the call to the corresponding nutscan_scan_* function will always
       return NULL.

SEE ALSO

       nutscan_init(3), nutscan_scan_usb(3), nutscan_scan_snmp(3), nutscan_scan_xml_http(3), nutscan_scan_nut(3), nutscan_scan_avahi(3),
       nutscan_scan_ipmi(3), nutscan_display_ups_conf(3), nutscan_display_parsable(3), nutscan_new_device(3), nutscan_free_device(3),
       nutscan_add_option_to_device(3), nutscan_add_device_to_device(3)

Network UPS Tools						    05/22/2012							   NUTSCAN_INIT(3)

OPTIUPS(8)							    NUT Manual								OPTIUPS(8)

NAME

       optiups - Driver for Opti-UPS (Viewsonic) UPS and Zinto D (ONLINE-USV) equipment

NOTE

       This man page only documents the hardware-specific features of the optiups driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       optiups was originally written against a PowerES 280es in nut-0.45. It was revised for nut-2.0.1 and tested against a PowerES 420E. It is
       expected to work with at least the PowerES, PowerPS, and PowerVS models.

       This driver additionally supports a Zinto D from ONLINE USV-Systeme AG because of their very similar commands, but it is unknown if it also
       works with other UPS from them.

       This driver will not work with the PowerES stock serial cable. You will need to construct your own three conductor cable:

	   UPS 6 -> PC 3
	   UPS 9 -> PC 2
	   UPS 4 -> PC 5

       The cable for Online-USV uses pin UPS 7 (not UPS 4) -> PC 5.

EXTRA ARGUMENTS

       This driver supports the following optional settings in the ups.conf(5) file:

       status_only
	   Only poll for critical status information. Without this, optiups (and all NUT drivers) poll all sorts of information from the UPS
	   fairly often. It is probably not often enough to hurt anything, so this option probably is not very useful, unless you have a flaky
	   serial connection or a highly loaded machine.

       nowarn_noimp
	   Does not print warnings when the UPS reports that a variable is not implemented or not pollable. Without the option you will get a
	   message sent to your system logs each time NUT polls the UPS. If you specify nowarn_noimp, this message will only be logged once.

       fake_lowbatt
	   This forces the low battery flag true. Without it, if you want to test your UPS, you will have to unplug it and wait until the battery
	   drops to a low/critical voltage level before NUT will respond and power down your system. With the flag, NUT should power down the
	   system soon after you pull the plug. When you are done testing, you should remove this flag.

	   For basic shutdown configuration testing, the command upsmon -c fsd is preferred.

       powerup
	   Zinto D from ONLINE-USV cannot be identified when switched to standby. Set this flag to allow the driver to power-up your Zinto UPS.
	   This will also power-up your equipment connected to the UPS!

BUGS

       On the 420E, ups.serial and ups.temperature are unsupported features. This is not a bug in NUT or the NUT driver, just the way things are
       with this UPS.

AUTHOR

       Russell Kroll, Scott Heavner, Matthias Goebl

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012								OPTIUPS(8)