cpufreq-set(1)cpufreq-set(1)NAME
cpufreq-set - A small tool which allows to modify cpufreq settings.
SYNTAX
cpufreq-set [options]
DESCRIPTION
cpufreq-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all
the time.
OPTIONS -c --cpu <CPU>
number of CPU where cpufreq settings shall be modified.
-d --min <FREQ>
new minimum CPU frequency the governor may select.
-u --max <FREQ>
new maximum CPU frequency the governor may select.
-g --governor <GOV>
new cpufreq governor.
-f --freq <FREQ>
specific frequency to be set. Requires userspace governor to be available and loaded.
-r --related
modify all hardware-related CPUs at the same time
-h --help
Prints out the help screen.
REMARKS
Omitting the -c or --cpu argument is equivalent to setting it to zero.
The -f FREQ, --freq FREQ parameter cannot be combined with any other parameter except the -c CPU, --cpu CPU parameter.
FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz by postfixing the value with the wanted unit name, without any space (fre-
quency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).
On Linux kernels up to 2.6.29, the -r or --related parameter is ignored.
FILES
/sys/devices/system/cpu/cpu*/cpufreq/
/proc/cpufreq (deprecated)
/proc/sys/cpu/ (deprecated)
AUTHORS
Dominik Brodowski <linux@brodo.de> - author
Mattia Dongili<malattia@gmail.com> - first autolibtoolization
SEE ALSO cpufreq-info(1), cpufreq-aperf(1)Mattia Dongili 0.1 cpufreq-set(1)
Check Out this Related Man Page
CPUPOWER-FREQUENCY-SET(1) cpupower Manual CPUPOWER-FREQUENCY-SET(1)NAME
cpupower frequency-set - A small tool which allows to modify cpufreq settings.
SYNTAX
cpupower [ -c cpu ] frequency-set [options]
DESCRIPTION
cpupower frequency-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scal-
ing_set_speed" all the time.
OPTIONS -d --min <FREQ>
new minimum CPU frequency the governor may select.
-u --max <FREQ>
new maximum CPU frequency the governor may select.
-g --governor <GOV>
new cpufreq governor.
-f --freq <FREQ>
specific frequency to be set. Requires userspace governor to be available and loaded.
-r --related
modify all hardware-related CPUs at the same time
REMARKS
By default values are applied on all cores. How to modify single core configurations is described in the cpupower(1) manpage in the --cpu
option section.
The -f FREQ, --freq FREQ parameter cannot be combined with any other parameter.
FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz by postfixing the value with the wanted unit name, without any space (fre-
quency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).
On Linux kernels up to 2.6.29, the -r or --related parameter is ignored.
FILES
/sys/devices/system/cpu/cpu*/cpufreq/
/proc/cpufreq (deprecated)
/proc/sys/cpu/ (deprecated)
AUTHORS
Dominik Brodowski <linux@brodo.de> - author
Mattia Dongili<malattia@gmail.com> - first autolibtoolization
SEE ALSO cpupower-frequency-info(1), cpupower(1)
0.1 CPUPOWER-FREQUENCY-SET(1)
i have found a structure contained in file global _pstat_body.h at the path
/usr/include/sys/pstat which is
named __pst_dynamic . A field by name psd_cpu_time is
an array of maximum cpu states the kernel supports .
i,e psd_cpu_time specify all
the cpu timings in an array... (8 Replies)
Hello all,
I have a sunfire 280R with 2 750 MHz CPU and 2 Gig of RAM. But when I compile things it does not seem to be using all of it's resources thus the compile take forever. At most it seem to be only using at most 10% of CPU and 5% of swap sapce. I have tried to renice the pid of the... (6 Replies)
Hi
I am very new to Linux, but very keen to learn it.
I am having a desktop of 300 MHz with 128 MB RAM and 30 GB hard drive with Windows XP.
My first question is - Is there any version/flavour of Linux available that can be installed on above system especially Fedora with less compromise... (6 Replies)
hi experts,
hi all, need help, how to get serial number of cpu or other hardware using command?
does anybody know using what syntax?
thank you
wu (8 Replies)
Hi friends,
I am currently working on an issue where i should write a program which utilizes Cpu as specified by the user. The function should be provided with an argument ( how much percentage of CPU has to be utilized by the process ) for example CPU(75) should utilize 75% of CPU. The function... (11 Replies)
Hi
I have server with 48 cpus running SUN os.
I have loaded with enough tasks. But I could see my CPU utilization is very less compared to kernal's cpu utlization.
below is the output of top command
load averages: 23.2, 10.1, 16.6; up 423+16:45:16 ... (25 Replies)
I'd like to install cpufreq modules on my server .
I tried
sudo modprobe acpi-cpufreq
but got the error
FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.18-238.12.1.el5xen/kernel/arch/x86_64/kernel/cpufreq/acpi-cpufreq.ko): No such device
cat /proc/cpuinfo gives this
... (11 Replies)
well i want to get the cpu usage of the current processes.the thing is that i want to list the processes with cpu usage=0 and the others(one list for cpu usage=0 and another for cpu usage>0)..i can list them,but i cant find a way to find the ps with cpu usage=0 and cpu usage>0..pls help me with... (6 Replies)
#cat xx
cpu 1 25 5 6 0 0
cpu0 1 23 5 6 7 0
cpu1 2 23 8 6 7 0
I want get the line contains cpu (not cpu0 or cpu1) 1/(1+25+5+6+0+0)
any help? (6 Replies)
OS: AIX
so we frequently receive a lot of cpu related alerts. all types of checks have been created to keep an eye on the cpu but a lot of these checks make too much noise as the CPU is always being seen as high. the system and application owners say there's no issue with the cpu.
so now,... (6 Replies)
I have a 12 core linux cpu but the load is really high on this box, hovering around 50. What configuration changes do we need to make so that system have no bottleneck. (13 Replies)
Hi,
I am on SPARC T5-2 with SOLARIS 11.1 / LDOM
From ILOM web interface i see 2 CPU Sparc
From the primary LDOM OS i see 1 CPU
root@LUOVM01 ~ # /usr/bin/kstat -m cpu_info | grep chip_id | uniq
chip_id 0
what is wrong ?
Dont forget you code... (12 Replies)
Hi,
I wish to compare the CPU LOAD 1 min with 5mins and 15mins.
If 1 min's CPU LOAd spike 3% compare to 5 mins or 15 mins CPU Load, it is warning.
If 1 min's CPU LOAd spike 5% compare to 5 mins or 15 mins CPU Load, it is critical.
However I received following code error, I google it and... (10 Replies)