Login or Register to Ask a Question and Join Our Community


HP-UX

Ignite-ux and dhcp server Linux

 
Thread Tools Search this Thread
Operating Systems HP-UX Ignite-ux and dhcp server Linux
Prev   Next
# 6  
Old 04-09-2014
I found the solution..is probably a bug

http://hpux.ch/images/1/15/Ignite-UX_Admin_Guide.pdf

"PHNE_36209 or a superseding bootpd patch must be used to enable the configuration of Next Server response."

---------- Post updated at 11:45 AM ---------- Previous update was at 11:45 AM ----------

But there's a problem: is an old patche probably superseeded

---------- Post updated at 11:59 AM ---------- Previous update was at 11:45 AM ----------

Quote:
Originally Posted by vbe
Well Ignite was written first for bootp and tftp... and so as far as I can remember when using it, you are to be in the same subnet as the server or have a server in every subnet where HP boxes are...
Is this the case?
Same subnet

---------- Post updated at 01:38 PM ---------- Previous update was at 11:59 AM ----------

SOLUTION FOUND!

I use a vmswitch on the same lan card of ignite server
must be on separate lan
for example
lan0: hosthp,ignite server
lan1:virtual switch on the same subnet of ignite server.
 
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Ubuntu

Ubuntu Server in VM - DHCP Server not working

Hello. Doing my first steps in Linux and while trying to configure a DHCP server in Linux i encountered some problems: TOPOLOGY: - Laptop with Windows 8.1 - VM Player 12 with Linux installed (Ubuntu Server 14.04) - ICS-DHCP-SERVER installed and running - Another LAPTOP conected to a... (1 Reply)
Discussion started by: Portuguevos
1 Replies

2. Solaris

Solaris DHCP Server

I need to find out the MAC address of an IP leased from DHCP server . For Eg:-i need to know the MAC of the below mentioned IP at the below mentioned time . IP : 172.16.28.90 Date :Sunday July 2nd 2011 Time : 14.07.2011 OS -Solaris 10 Vital QIP IP management software using to... (0 Replies)
Discussion started by: sandeep.tk
0 Replies

3. IP Networking

DHCP server discover

I need a script to scan the surrounding DHCP servers. I want to know how many dhcp servers are there on my connected etnernet. (2 Replies)
Discussion started by: getrue
2 Replies

4. Red Hat

DHCP Server address

Where can you find your DHCP Server address? I checked all of the files that this mentioned with no luck. Quick HOWTO : Ch08 : Configuring the DHCP Server - Linux Home Networking (6 Replies)
Discussion started by: cokedude
6 Replies

5. HP-UX

Ignite issue on HPUX server

Hi All, I am getting below error while igniting(restoring image) on 2470 server. i tried with different images it is giving same error. please help me out to resolve this issue * Making VxFS filesystem for "/usr/aethos/snss/suppimpapp1", (/dev/vg00/rsuppimpapp1). *... (3 Replies)
Discussion started by: Prabhu H
3 Replies

6. HP-UX

HP-UX Ignite server

Sorry if this has been asked and answered, but I can't find this particual problem. I've had an Ignite server running for years on a small internal network with images we load on daily basis. Tried to load two servers, L2000 and C3600 , both with same problem. # boot lan.192.168.2.2 install ... (0 Replies)
Discussion started by: ddeblance
0 Replies

7. IP Networking

DHCP server question

hi all... i have a question about of the dhcp server.... how i can configurate 3 vlans on the server....? thank you (5 Replies)
Discussion started by: chanfle
5 Replies

8. UNIX for Advanced & Expert Users

an ignite server for Solaris 8 ?

I know and used an ignite server for hp-ux, but is there such a beast for Solaris flavour of unix ? thanks simon (1 Reply)
Discussion started by: simon2000
1 Replies

9. UNIX for Advanced & Expert Users

without an ignite server ??

system: HP-UX 10.20 with HFS mounted. How can I convert the HFS to VxFS without an ignite server ? Is this possible ? thanks simon2000 (4 Replies)
Discussion started by: simon2000
4 Replies

10. UNIX for Dummies Questions & Answers

DHCP Server Suggestions

I need to setup a DHCP server in our office for Macs, Windows (98/ME/NT/2000) Linux and Unix servers and workstations. We want it on a Unix server, but I'm unsure what is out there. The Unix world is new to me, so any suggestions would be appreciated. Thanks! Corey (2 Replies)
Discussion started by: coreyhead
2 Replies
Login or Register to Ask a Question

LEARN ABOUT SUSE

tgt-setup-lun

tgt-setup-lun(8)					      System Manager's Manual						  tgt-setup-lun(8)

NAME

       tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target

SYNOPSIS

       tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]

DESCRIPTION

       Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
       iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.

       The  script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
       tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.

EXAMPLES

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82

       Create a target that uses /dev/sdb1 and allows connections from any initiator:
       tgt-setup-lun -d /dev/sdb1 -n my_target

       Display help:
       tgt-setup-lun -h

AUTHOR

       Written by Erez Zilber

REPORTING BUGS

       Report bugs to <erezz@voltaire.com>.

COPYRIGHT

       Copyright (C) Voltaire Ltd. 2008.

																  tgt-setup-lun(8)