hi all,
can someone pls pass on your suggestion?
Firs thing I am testing a script which checks for the pattern 'Needs Maintenance' from metastat output and prints some messages in the screen. So i need to simulate an error in mirrored disk for metastat to give this message 'Needs Maintenance'.... (3 Replies)
My company is running a solaris 2.7 machine. The machine is getting slow recently. I have no expert in solaris. Please help.
I checked the log in /var/adm/message:
I also checked with the command iostat -nE. It returns:
Metastat returns the followings:
What should i do now?... (10 Replies)
I have to rescue the volumes in a soloris 7 machine. The metastat returns the following result:
d6 is dying with iostat -nE returns Harderror 3, Transports error 9
Can some offer me some help? Thank you very much. (6 Replies)
Hi people,
I have on problem when execute the command METASTAT...
d60: Soft Partition
Device: d10
State: Errored
Size: 12582912 blocks (6.0 GB)
Someone help me?
Thank you very much (4 Replies)
Hi All,
Sorry to post a problem for my first post but I'm in a bit of a pickle at the minute!
I have an Ultra45 connected to a Storedge 3100 series, 2 internal, 2 external disks with a db application running on the external disks.
Now everything is working fine and we've had no downtime or... (4 Replies)
Hi friends,
I'm newbie to SVM.
Just wanna try installed it on one of our server (to do mirroring for disk0 and disk1) but i think im lost until now. :(
the steps i've taken is as below:-
1.prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2
2.metadb -a -c 3 -f c1t0d0s7... (3 Replies)
Greetings
How can i restore metastat db after a solaris upgrade (9 to 10)?
will it work if i save and restore /etc/vfstab and /etc/lvm/md.cf file?
root@netad# metastat
d35: Mirror
Submirror 0: d38
State: Okay
Submirror 1: d39
State: Okay
Pass:... (2 Replies)
Hi,
after issuing metastat command I am getting output as follows
Actually these soft partitions are more than 100.
I want output as Device Name & Size.
for eg d4004 2.0 GB (4 Replies)
Dear,
Required an script such that :
If metastat |grep Needs , results in some output then this command to be executed for the same :
opcmsg object=metastat a=OS msg_grp=OpC severity=critical msg_text="Need maintenance for the system $line"
With regards,
Mjoshi (3 Replies)
Hi,
We have a Solaris 10 machine with update 11 and was configured with IBM storage. It was assigned 2 LUNs (each 70GB) which were striped to make it 140GB. we have taken full backup of entire machine and Our storage team replaced IBM storage with Nimble storage (they did storage-level... (6 Replies)
Discussion started by: prvnrk
6 Replies
LEARN ABOUT OPENSOLARIS
sulogin
sulogin(1M) System Administration Commands sulogin(1M)NAME
sulogin - access single-user mode
SYNOPSIS
sulogin
DESCRIPTION
The sulogin utility is automatically invoked by init when the system is first started. It prompts the user to type a user name and password
to enter system maintenance mode (single-user mode) or to type EOF (typically CTRL-D) for normal startup (multi-user mode). The user should
never directly invoke sulogin. The user must have the solaris.system.maintenance authorization.
The sulogin utility can prompt the user to enter the root password on a variable number of serial console devices, in addition to the tra-
ditional console device. See consadm(1M) and msglog(7D) for a description of how to configure a serial device to display the single-user
login prompt.
FILES
/etc/default/sulogin
Default value can be set for the following flag:
PASSREQ
Determines if login requires a password. Default is PASSREQ=YES.
/etc/default/login
Default value can be set for the following flag:
SLEEPTIME
If present, sets the number of seconds to wait before login failure is printed to the screen and another login attempt is allowed.
Default is 4 seconds. Minimum is 0 seconds. Maximum is 5 seconds.
Both su(1M) and login(1) are affected by the value of SLEEPTIME.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsr |
+-----------------------------+-----------------------------+
SEE ALSO auths(1), login(1), consadm(1M), init(1M), su(1M), attributes(5), msglog(7D)NOTES
By default, the root user has all authorizations.
Granting the solaris.system.maintenance authorization to the Console User Rights Profile may have an undesirable side effect of granting
the currently logged in user maintenance mode access. The solaris.system.maintenance authorization should be directly granted to appropri-
ate users rather than through the Console User Rights Profile.
SunOS 5.11 21 Aug 2008 sulogin(1M)