Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Sco UNIXware 7.1.4 error in booting
Operating Systems SCO Sco UNIXware 7.1.4 error in booting Post 302959950 by jgt on Sunday 8th of November 2015 10:22:08 AM
Old 11-08-2015
Do not create an emergency boot cd.
Re-install the RAID controller, check the CMOS to make sure that the sata drive will boot before the RAID, and re-boot.
Install the driver for the RAID controller, either from media, or download.
Configure the new (to this installation) disks.
Create a new directory in / (on the sata drive) and mount the root file system from the RAID to this directory.
cd to /new/etc and replace whatever corruption their is.
You should now be able to re-boot from the RAID partition.
Once you are successful booting from the RAID, then create an emergency boot cd.
 

8 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

SCO Unixware 2.1

I am using SCO Unixware 2.1 & some PC clients are connected, suddenly one message appearslike : UX:strintercept error: dropping message this message starts coming repeatedly & agtre some time system hangs.I had to reset the system & now the problem is not there.Please suggest, why this is... (0 Replies)
Discussion started by: paprch
0 Replies

2. UNIX for Dummies Questions & Answers

SCO Unixware 7 download

According to this thread: https://www.unix.com/showthread.php?t=1 one guy says However, I cannot find any sco unixware7 iso download link in their download section (http://wdb1.sco.com/clbk_web/owa/dwn_customer), is it really for free, and if that is true, where can I download it? Thanks, (2 Replies)
Discussion started by: phalcos
2 Replies

3. SCO

Samba 3.0.24 in SCO UnixWare 7.1.4

Please help me in troubleshooting my problem in Samba? I tried to instal Samba 3.0.24 in our SCO UnixWare 7.1.4 but after installing the nmbd daemon is not running. When i check the syslog from /var/adm, the following error appears: Sep 30 13:04:22 unixeei nmbd: bind failed on port 137... (0 Replies)
Discussion started by: eric_hing
0 Replies

4. SCO

sco unixware + oracle 8.0.5

hi, anybody can give procedure for how to install oracle 8.0.5 in sco unixware 7.1.4. (0 Replies)
Discussion started by: prakrithi
0 Replies

5. UNIX for Dummies Questions & Answers

SCO Unixware 7.1.4 Network Adapter Error

Hi All I P2Vd a Unixware 7.1.4 box with VMWare Vsphere. I try to add a network adapter under Network Configuration Manager and it comes up with the error attached. I've added a virtual adapter using the "E1000" option. It detects both the AMD PCI NET and E1000 virtual adapters under Network... (8 Replies)
Discussion started by: flashinwrx
8 Replies

6. SCO

Noob needs help with Sco Unixware 7.1

We are retiring a Unixware 7.1 server that has custom applications on it. It has Raid 5 and we would like to use the machine for other things. Is there a way we can image/clone to virtual machine file and run that VM within say Virtual PC 2007 or VMware? I am not aware of anything to do this. I... (20 Replies)
Discussion started by: ccd1977
20 Replies

7. SCO

SCO Unixware 7.1.1 Install - Need help

(sorry my English, is really poor). I have a SCO Unixware 7.1.1 and I need install in ML350 G3. Reading in google and HP web, make a floppy disks for install, but the options that I have is for network or floppy disk. How install from CD with patch for HP smart array 532 ?? or How... (5 Replies)
Discussion started by: xplertor
5 Replies

8. SCO

My UnixWare SCO Server

Hi, I'm new to this Unix world and have taken over looking after the I.T side of things at work, which includes the internal ERP system which runs on a UNIX SCO platform. My initial worry is what state this is in as its been on site over 20 years. What would be the first things to check on... (13 Replies)
Discussion started by: Mick_Dundee
13 Replies

LEARN ABOUT NETBSD

mfi

MFI(4)							   BSD Kernel Interfaces Manual 						    MFI(4)

NAME

     mfi -- LSI Logic & Dell MegaRAID SAS RAID controller

SYNOPSIS

     mfi* at pci? dev ? function ?

DESCRIPTION

     The mfi driver provides support for the MegaRAID SAS family of RAID controllers, including:

	   -   Dell PERC 5/e, PERC 5/i, PERC 6/e, PERC 6/i
	   -   Intel RAID Controller SRCSAS18E, SRCSAS144E
	   -   LSI Logic MegaRAID SAS 8208ELP, MegaRAID SAS 8208XLP, MegaRAID SAS 8300XLP, MegaRAID SAS 8308ELP, MegaRAID SAS 8344ELP, MegaRAID
	       SAS 8408E, MegaRAID SAS 8480E, MegaRAID SAS 8708ELP, MegaRAID SAS 8888ELP, MegaRAID SAS 8880EM2, MegaRAID SAS 9260-8i
	   -   IBM ServeRAID M1015, ServeRAID M5014

     These controllers support RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50 and RAID 60 using either SAS or SATA II drives.

     Although the controllers are actual RAID controllers, the driver makes them look just like SCSI controllers.  All RAID configuration is done
     through the controllers' BIOSes.

     mfi supports monitoring of the logical disks in the controller through the bioctl(8) and envstat(8) commands.

EVENTS

     The mfi driver is able to send events to powerd(8) if a logical drive in the controller is not online.  The state-changed event will be sent
     to the /etc/powerd/scripts/sensor_drive script when such condition happens.

SEE ALSO

     intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8)

HISTORY

     The mfi driver first appeared in NetBSD 4.0.

BSD
								  March 22, 2012							       BSD
All times are GMT -4. The time now is 02:35 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy