hi
i have created socket program with proper IP address and port no
client side port no 1085 and 1086
gateway side port no 1086 and 1085
and port no 1087 and 1088
receiver side port no 1088 and 1087
well it works fine on client and gateway side not on receiver and gateway side... (2 Replies)
required Solaris 5.10 Kernel patch 137111-03
required Solaris 5.10 Fibre Channel Device Driver patch 125184-08
I want to know about the descriptions and what the patches will do. I searched www.sun.com (patches/updates) but don't see I am looking for. (1 Reply)
Here is an awk statement i am using to sum a series of numbers..
awk -F"," '{ for (i=1; i<=NF ; ++i) sum += $i;} # if (i > max) max=i }
END { s=""; for (i=1; i<=max; ++i) { printf "%s%s", s, sum; s=","; } printf "\n" }' filename.csv
It works fine for the summing part. But since my series... (19 Replies)
im kinda new to shell scripting so i need some help
i try to run this script and get the error code
> 5 ")syntax error: operand expected (error token is "
the code for the script is
#!/bin/sh
#
# script to see if the given value is correct
#
# Define errors
ER_AF=86 # Var is... (4 Replies)
what is this error log = hda: irq timeout: error=0x00 and how to solve?
every day upon checking the logs i see this error.
hda: irq timeout: error=0x00
hda: irq timeout: error=0x00
hda: irq timeout: error=0x00
hda: irq timeout: error=0x00
hw_client: segfault at 0000000000000046 rip... (3 Replies)
Hi All !
I am just trying to print bash variable in awk statement as string
here is my script
n=1
for file in `ls *.tk |sort -t"-" -k2n,2`; do
ak=`(awk 'FNR=='$n'{print $0}' res.dat)`
awk '{print "'$ak'",$0}' OFS="\t" $file
n=$((n+1))
unset ak
doneI am getting following error
awk:... (7 Replies)
Hi all,
OS is Solaros 10 Sparc
While doing Netbackup upgradation to 7.5 , the server was asked to reboot.
But then it came up in single user mode,
and after I typed format command it showed some disk error.
bash-3.00# format
Searching for disks...WARNING:... (2 Replies)
I keep getting "Too many open files" in /var/adm/messages that I do not know how to fix.
I've searched for solution on this forum and have increased the file descriptors limit but the problem persists.
The problem is happening in a solaris zone....
/var/adm/messages log example
May... (8 Replies)
hi all,
i had the below script
filename = /osa/data1/output.txt
printf '%27s%53s\n' ' CURRENT DATE' 26-08-2014 >> $filename
iam getting the ambigiuos redirect error in the 2nd line of the code...please guide me
regards,
vasa saikumar (3 Replies)
Discussion started by: hemanthsaikumar
3 Replies
LEARN ABOUT HPUX
cmdisklock
cmdisklock(1m)cmdisklock(1m)NAME
cmdisklock - manage Serviceguard cluster lock devices.
SYNOPSIS
cmdisklock check path
cmdisklock [-f] reset path
DESCRIPTION
cmdisklock is a tool to check the current state of a Serviceguard cluster lock device. It can also be used to reset the state of the clus-
ter lock device. The need to reset the cluster lock device state could arise if the cluster lock device is replaced or becomes corrupt.
A cluster lock device can be either an HP-UX LVM cluster lock or a cluster lock LUN device. HP-UX LVM cluster locks exist only on a disk
in an LVM volume group. Cluster lock LUNs exist only on disks dedicated to cluster lock. cmdisklock is useful for checking either type of
cluster lock and for re-initializing cluster lock LUN devices after a failure or corruption.
NOTE
To restore an HP-UX LVM cluster lock, use vgcfgrestore. cmdisklock will fail until vgcfgrestore is run, and cmdisklock is unnecessary as
long as vgcfgbackup was done after the cluster lock was initialized. See the Managing Serviceguard manual for details.
The syntax of the path option depends on the type of lock. For HP-UX LVM cluster lock disks, the syntax is VG:PV (for example:
/dev/vglock:/dev/dsk/c0t0d2). For cluster lock LUN disks, the path is the disk device path. For example, /dev/sdd1 (on Linux) or
/dev/dsk/c0t1d2 (on HP-UX).
Options
cmdisklock supports the following options:
check Check the current state of the cluster lock device and report the results.
reset Reset (initialize) the state of the cluster lock device. This operation should only be performed on a cluster lock
LUN device. For HP-UX LVM cluster lock, use vgcfgrestore as documented in the Managing Serviceguard manual. After
performing a reset, a check can be used to verify that the lock is cleared.
EXAMPLES
If the cluster lock LUN device becomes corrupted and the cluster is up, messages like the following will appear in syslog.
Mar 15 12:20:41 usb cmdisklockd[17599]: WARNING: Cluster lock LUN /dev/dsk/c0t1d2 is corrupt: bad label. Until this situation is cor-
rected, a single failure could cause all nodes in the cluster to crash.
Mar 15 12:20:41 usb cmdisklockd[17599]: After ensuring that all active nodes in the cluster have logged this message, run 'cmdisklock reset
/dev/dsk/c0t1d2' to repair
Mar 15 12:20:41 usb cmdisklockd[17599]: Cluster lock disk /dev/dsk/c0t1d2 is inaccessible
Once the above messages appear in syslog on all running nodes, the following command will re-initialize the cluster lock LUN:
ucd:/> cmdisklock reset /dev/dsk/c0t1d2
WARNING: Cluster lock LUN /dev/dsk/c0t1d2 is corrupt: bad label. Until this situation is corrected, a single failure could cause all nodes
in the cluster to crash.
After ensuring that all active nodes in the cluster have logged this message, run 'cmdisklock reset /dev/dsk/c0t1d2' to repair
/dev/dsk/c0t1d2 is inaccessible
Resetting cluster lock device /dev/dsk/c0t1d2
Cluster lock reset completed
/dev/dsk/c0t1d2 is accessible
cleared
After the lock is restored, a message like the following appears in syslog:
Mar 15 12:23:11 usb cmdisklockd[17599]: Cluster lock disk /dev/dsk/c0t1d2 is accessible
WARNINGS
CAUTION
For cluster lock LUN, reset is a potentially destructive operation. While cmdisklock checks for known volume manager and file system use
(overridden by -f), it does not validate that the device to be reset is actually used by any cluster. If -f is used on the wrong device
file, loss of data may result.
CAUTION
Care should be taken when doing a reset when the cluster is active as there is a remote possibility that the cluster will partition right
when this command is run and both nodes could end up thinking they have successfully acquired the lock. To avoid this situation, make sure
cmcld has logged a message in syslog on all running nodes saying the device is inaccessble, before performing a reset. Note that it is
safe to run cmdisklock when the cluster is down.
RETURN VALUE
cmdisklock returns the following values:
0 Successful completion.
1 The disk is inaccessible or is not recognized as a cluster lock.
AUTHOR
cmdisklock was developed by HP.
SEE ALSO cmapplyconf(1m), cmviewcl(1m), vgcfgbackup(1m), vgcfgrestore(1m)
Requires Optional Serviceguard Software cmdisklock(1m)