08-07-2013
thanks but still unable to do it.
one question can I create mount point and then create RAID1 or first I should create RAID1 and then create mount point.
Disk are new showing in ioscan -fnC disk but its not claimed what could be reason.
disk 15 0/4/1/0.0.0.4.0 sdisk CLAIMED DEVICE HP EG0300FAWHV
/dev/dsk/c10t4d0 /dev/rdsk/c10t4d0
disk 17 0/4/1/0.0.0.5.0 sdisk CLAIMED DEVICE HP EG0300FBDSP
/dev/dsk/c10t5d0 /dev/rdsk/c10t5d0
what could be the reason?
---------- Post updated at 01:27 PM ---------- Previous update was at 01:24 PM ----------
As I plugged in the disk it showed the disk has been claimed as above. but after few mints its showing not claimed. see the output below
ioscan- fnC disk.
disk 15 0/4/1/0.0.0.4.0 sdisk NO_HW DEVICE HP EG0300FAWHV
/dev/dsk/c10t4d0 /dev/rdsk/c10t4d0
disk 17 0/4/1/0.0.0.5.0 sdisk CLAIMED DEVICE HP EG0300FBDSP
9 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Hello,
I am having a Problem with an Arena EX3 Raid on an HPUX 10.20 Workstation.
Everything is working fine until I shutdown the Server and power off the Raid. Then I get a filesystem corruption on the Raid. This happens everytime.
The Raid is configured as Raid Level 1.
I would really... (1 Reply)
Discussion started by: nleuenbe
1 Replies
2. Shell Programming and Scripting
I am running HPUX and using WLM (workload manager). I want to write a script to fork CPUs to basically take CPUs from other servers to show that the communication is working and CPU licensing is working. Basically, I want to build a script that will use up CPU on a server. Any ideas? (2 Replies)
Discussion started by: cpolikowsky
2 Replies
3. UNIX for Dummies Questions & Answers
Hi
Can someone tell me what are the differences between software and hardware raid ?
thx for help. (2 Replies)
Discussion started by: presul
2 Replies
4. Solaris
Dear ALl,
I have a RAID 5 volume which is as below
d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5
d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0
d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4
d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Discussion started by: jegaraman
2 Replies
5. Solaris
Hello All,
I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps.
TIA
Curious
solarister (1 Reply)
Discussion started by: Solarister
1 Replies
6. HP-UX
I'm sharing this in case anybody needs it. Modified from the original solaris pwage script. This modified hpux script will check /etc/password file on hpux trusted systems search /tcb and grep the required u_succhg field. Calculate days to expiry and notify users via email.
original solaris... (2 Replies)
Discussion started by: sparcguy
2 Replies
7. AIX
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies
8. Solaris
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Discussion started by: KhawHL
4 Replies
9. Red Hat
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
LEARN ABOUT NETBSD
ataraid
ATARAID(4) BSD Kernel Interfaces Manual ATARAID(4)
NAME
ataraid -- software BIOS RAID
SYNOPSIS
pseudo-device ataraid
ld* at ataraid? vendtype ? unit ?
DESCRIPTION
The ataraid driver provides support for BIOS-based software RAID controllers. These are devices which have some simple support for several
basic RAID levels (often RAID 0 and RAID 1), but which require software support to actually perform the RAID function. The BIOS support is
largely just to create and recognize the array so that it may be a boot device.
The driver currently supports RAID formats from:
o Adaptec HostRAID (found in Intel 6300ESB)
o Intel MatrixRAID
o JMicron RAID
o nVidia MediaShield
o Promise FastTrak
o Via V-RAID (found in many VIA-based motherboards)
Status of the logical disk as well as the disks associated with it, can be viewed through the bioctl(8) utility.
SEE ALSO
ld(4), bioctl(8)
HISTORY
The ataraid driver first appeared in NetBSD 2.0.
AUTHORS
The ataraid driver was originally adapted from FreeBSD by Jason Thorpe <thorpej@NetBSD.org>.
BUGS
Not all features of the software RAID are currently recognized or supported. For example, the Adaptec support doesn't recognize when a RAID
1 should be in a ``building'' state, and it does not do the right thing.
At least part of the reason for this is that the publically-available information on these formats is quite limited.
BSD
September 16, 2008 BSD